4 layers150.3 × 132.3 mm
4 layers162.3 × 144.3 mm
Amplifier
msayad97/Amplifier1- Size
- 162.3 × 144.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 159
- Nets
- 79
- Pads
- 381
- Tracks, vias
- 642, 112
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Jun 2023
- Updated
- 23 Jan 2025
Overview
Amplifier is an open-source printed circuit board by msayad97, from the msayad97/Amplifier repository on GitHub. It is a 4-layer board of 162.3 × 144.3 mm with 159 parts on 79 nets, routed with 642 tracks and 112 vias.
It is built around the AD8021AR, AD8017ARZ and AD8033ARZ, with the BAV99WT1G, BD139 and BAT54XV2T5G-HXY among its other parts. Its parts include 59 resistors, 55 capacitors, 9 transistors, 8 diodes and 6 connectors. It belongs with the audio and music boards of this library.
Main components
9
AD8021AR
SOIC-8-12V~-2.5V、2.5V~12V -40℃~+85℃ 2.1nV/√Hz@50kHz 24V 400uV 420V/us 490MHz 500nA 500nV/℃ 7.5uA 75mA 7mA 98dB SOIC-8 Operational Amplifier ROHSAnalog DevicesLow Noise Amplifiers (LNA) - RFAD8017ARZ
SOIC-8-40℃~+85℃ -6V~-2.2V、2.2V~6V 1.6V/ns 1.9nV/√Hz@10kHz 2 270mA 2mV 45uA 5V~12V 63dB 7mA ESD protection SOIC-8 Operational Amplifier ROHSAnalog DevicesOperational AmplifierAD8033ARZ
SOIC-8-40℃~+85℃ 1 100dB 11nV/√Hz@100kHz 1mV 1pA 3.3mA 40mA 4uV/℃ 5V~24V 80MHz 80V/us High capacitive load driving Rail-to-rail output SOIC-8 FET Input Amplifiers ROHSAnalog DevicesOperational Amplifier
BAV99WT1G
SOT-323-55℃~+150℃ 1 Pair Series Connection 1.25V@150mA 150mA 2.5uA@75V 200mW 75V SOT-323 Switching Diodes ROHSTECH PUBLICSwitching Diodes
BD139
TO-126-65℃~+150℃ 1 NPN 1.5A 10uA 12.5W 500mV 5V 63 80V NPN TO-126 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
BAT54XV2T5G-HXY
SOD-523200mA 2uA@25V 30V 600mA 800mV@100mA SOD-523 Schottky Diodes ROHSHXY MOSFETSchottky DiodesBD140
TO-126-65℃~+150℃ 1 PNP 1.25W 1.5A 100nA 500mV 5V 63 80V PNP TO-126 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
BSC340N08NS3 G
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 204pF 23A 3.5V 32W 34mΩ@10V 756pF 80V 9.1nC@10V TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETs
IXTH90P10P
TO-247MOSFETsLittelfuse
Parts
159| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C10, C11, C12, C14, C15, C23, C24, C25, C27, C28, C30, C31, C32 +14 |
| 12 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C26, C29, C37, C40, C45, C46, C47, C48, C49, C50, C126, C140 |
| 10 | 2R2 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 9 | 2R2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R31, R32, R33, R36, R50, R52, R55, R56 |
| 8 | 39R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29, R30, R34, R37, R40, R41, R43, R44 |
| 6 | 220R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R35, R42, R47, R58, R59 |
| 6 | BAV99WT1G | Package_TO_SOT_SMD:SOT-323_SC-70 | D2, D4, D5, D6, D7, D9 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1.1, R38, R39, R53, R54 |
| 5 | BD139 | Package_TO_SOT_THT:TO-126-3_Vertical | Q1, Q4, Q6, Q7, Q8 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45, R46, R48, R49 |
| 4 | 120R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R17, R19 |
| 4 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28, R51, R57 |
| 4 | 470p | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C16, C17, C143, C144 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R15, R18, R25 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C19, C20 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H5, H6, H7 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C42, C141 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CU1, CU2 |
| 2 | 270R | Library:AX_1.000X.225_.034 | R24, R26 |
| 2 | BAT54XV2T5G | Library:D_SOD-523_new | D1, D8 |
| 2 | BD140 | Package_TO_SOT_THT:TO-126-3_Vertical | Q9, Q10 |
| 2 | DNA | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21, C22 |
| 2 | FerriteBead | Library:BLM21PG300SN1B | FB1, FB2 |
| 2 | R_Potentiometer | Library:PVG3A | RV1, RV2 |
| 1 | 1.35k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RU2 |
| 1 | 1:1 | Library:TR2 | TR2 |
| 1 | 1:1:4:4 | Library:TR1 | TR1 |
| 1 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 25.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RU1 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1.2 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 4n7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C34 |
| 1 | AD8017ARZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | AD8021AR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AD8033 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | BLF188XRU | Library:SOT539A | U3 |
| 1 | BSC340N08NS3G | Package_TO_SOT_SMD:TDSON-8-1 | Q5A1 |
| 1 | Enable | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J2 |
| 1 | IXTH90P10P | Library:TO-247-3_MOSFET | Q2 |
| 1 | Input | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1 |
| 1 | Input_56V | Library:MOLEX_26013115 | J6 |
| 1 | LT3014xS5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | NDA | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C142 |
| 1 | Output | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J5 |
| 1 | Vn_-5V | Library:MOLEX_26013115 | J4 |
| 1 | Vp_8V | Library:MOLEX_26013115 | J3 |
More from msayad97/Amplifier
4- 4 layers252 × 118 mm
- 2 layers200 × 116 mm
- 2 layers128.8 × 109.3 mm
Similar boards
- 6 layers55 × 40 mm
- 2 layers74.9 × 20.3 mm
Rt soldering iron
kcuzner/rt-soldering-iron
Soldering iron driver board for Weller RT tips. A work in progress. Firmware in rust.
126 parts6 - 4 layers100 × 67 mm
2Phase SynchBuck
Natchpai/LQRx-InterleavedBuck
Digitally Controlled 2-phase Interleaved Buck Converter
306 parts3CERN-OHL-S-2.0 - 2 layers60.6 × 40 mm
- 2 layers38 × 25.5 mm
Inverting
manoj5373/KiCad-Hardware-Lab
A collection of practical electronics and PCB design experiments developed using KiCad, covering analog circuits, digital logic, power supplies, counters, amplifiers, and hardware design.
6 parts - 4 layers49.8 × 69.1 mm
- 2 layers92 × 62.5 mm
- 4 layers111.9 × 100 mm
Driver Board
ishaansalian/Embedded-Hardware-Assessment
This repository contains the KiCad design files created for an embedded hardware design assessment.
46 parts
Questions
How big is the Amplifier PCB?
It measures 162.3 × 144.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Amplifier use?
159 parts, built around the AD8021AR, AD8017ARZ, AD8033ARZ and BAV99WT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amplifier KiCad files?
From the msayad97/Amplifier repository on GitHub, at the commit this page was made from: the board is KiCad/Projects/Amplifier/Amplifier.kicad_pcb and its schematic KiCad/Projects/A3/A3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amplifier design in my own project?
Its repository states no licence, so its author keeps all rights: ask msayad97 before reusing the design.