
Dongle
mornepousse/SpLiT_KaSe
Custom ergonomic split fully-wireless keyboard - ESP32-S3, NRF24L01+, KiCad 9

Custom ergonomic split fully-wireless keyboard - ESP32-S3, NRF24L01+, KiCad 9
KaSe is an open-source printed circuit board by mornepousse, from the mornepousse/SpLiT_KaSe repository on GitHub. It is a 2-layer board of 168.6 × 140.4 mm with 149 parts on 187 nets, routed with 1,815 tracks and 986 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, TPS61040DBV and TPS43-201A-S, with the BAT54C among its other parts. Its parts include 54 diodes, 41 resistors, 33 switches, 5 capacitors and 5 connectors. It belongs with the keyboards and input boards and the ESP32 boards of this library.
USB dongle that receives keystrokes from both keyboard halves via NRF24L01+ and presents as USB HID to the host PC.
PC <--USB--> CH334R hub <--port1--> ESP32-S3 (USB HID native)
<--port2--> CH340C (flash/debug UART)
ESP32-S3 <--SPI--> NRF24L01+ #1 <--2.4GHz--> Left half
NRF24L01+ #2 <--2.4GHz--> Right half| Component | Role | Package |
|---|---|---|
| ESP32-S3-WROOM-2 | MCU, USB HID | Module |
| NRF24L01+ (x2) | Wireless RX from each half | Breakout |
| CH334R | USB 2.0 hub, crystal-free | QSOP-16 |
| CH340C | USB-to-UART for programming | SOP-16 |
| AMS1117-3.3 | 5V USB to 3.3V LDO | SOT-223 |
| UMH3N (x2) | Auto-reset (DTR/RTS to EN/IO0) | SOT-363 |
Single USB cable to PC, split internally:
Crystal-free mode: XI pin tied to GND.
Target: 30 x 35 mm including antennas, to fit in an M.2 network card slot.
USB 5V --> AMS1117-3.3 --> 3.3V for ESP32-S3, NRF24L01+, and all logic.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | LED_3mm | LED_THT:LED_D3.0mm | D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D33, D34, D35, D36 +17 |
| 33 | SWITCH_PUSH | key:SW_Cherry_MX_1.00u_PCB_mirror | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +17 |
| 23 | 100 | Resistor_SMD:R_0603_1608Metric | R10, R12, R13, R15, R16, R18, R19, R20, R22, R23, R25, R26, R28, R29, R31, R32 +7 |
| 21 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D32 +5 |
| 11 | 22 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R8, R11, R14, R17, R21, R24, R27, R30, R33, R36 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R38, R43 |
| 2 | G*** | kibuzzard-69DCBEB2 | kibuzzard-69DCBEB2, kibuzzard-69DCBEB2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R41 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 10uH | Inductor_SMD:L_APV_APH0640 | L1 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R42 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08 | key:WeAct_1.54_e-ink | J1 |
| 1 | DD4012SA module +3.3 | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U5 |
| 1 | ESP32-S3-DevKitC | MaeLid:ESP32-S3-DevKitC | U2 |
| 1 | G*** | kibuzzard-69DCC046 | kibuzzard-69DCC046 |
| 1 | G*** | kibuzzard-69DCC033 | kibuzzard-69DCC033 |
| 1 | G*** | kibuzzard-69DCBED2 | kibuzzard-69DCBED2 |
| 1 | GND | kibuzzard-69DCBED2 | kibuzzard-69DCBED2 |
| 1 | LX_LISC_V2 | MaeLid:LX_LISC_V2 | J3 |
| 1 | NRF24L01_Breakout | MaeLid:NRF24L01 | U4 |
| 1 | R_sense | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | TPS43-201A-S | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | TPS61040DBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |

mornepousse/SpLiT_KaSe
Custom ergonomic split fully-wireless keyboard - ESP32-S3, NRF24L01+, KiCad 9

DreaM117er/Paicorea
Paicorea is a 42 keys split keyboard, with optional way to drive Azoteq TPS43 trackpad.


meeTeam05/smart-air
Devices provision over BLE, publish telemetry/shadow over MQTT, and serve the app through a Cloudflare-fronted Fastify API. See Features below for the full breakdown.

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.


plinkysynth/plinky_public
a public release of the plinky sw and hw


It measures 168.6 × 140.4 mm and has 2 copper layers, 1.6 mm thick.
149 parts, built around the ESP32-S3-DEVKITC-1-N8, TPS61040DBV, TPS43-201A-S and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mornepousse/SpLiT_KaSe repository on GitHub, at the commit this page was made from: the board is KaSe.kicad_pcb and its schematic KaSe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mornepousse before reusing the design.