
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

Kicad schematic, footprint project
Magnetic led cube is an open-source printed circuit board by moltak, from the moltak/magnetic_led_cube repository on GitHub. It is a 2-layer board of 45 × 50 mm with 7 parts on 5 nets, routed with 47 tracks and 0 vias.
It is built around the MB6S. Its parts include 4 connectors, 1 resistor and 1 diode.
#Magnectic LED Cube by 될놈될
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02 | P1, P2, P3, P4 |
| 1 | 1k | Resistors_THT:Resistor_Horizontal_RM7mm | R1 |
| 1 | LED | LEDs:LED-3MM | D1 |
| 1 | MB6S | mb6s:mb6s | UZ1 |

AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)


Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.


jrtaylor71/Smart-Thermostat-Alt-Firmware
A comprehensive, feature-rich smart thermostat firmware for ESP32-S3 microcontrollers with touch display, web interface, and Home Assistant integration.

AsadImranRafique/CM5-Carrier-Board-Rev2
Open-source six-layer Raspberry Pi CM4/CM5 carrier board with USB-C, 25 W PoE, M.2 NVMe, microSD, I2S, and expansion-board connectors.

Febriyandi12/Desain_PCB
Kolaborasi untuk update desain pcb yang telah di research

It measures 45 × 50 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the MB6S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the moltak/magnetic_led_cube repository on GitHub, at the commit this page was made from: the board is magnetic_led_cube.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask moltak before reusing the design.