

Zabbix monitor for Radex MR107/MR107+ Radon detector
- Size
- 35.8 × 70.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 105
- Pads
- 282
- Tracks, vias
- 498, 56
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Dec 2023
- Updated
- 6 Sep 2024
Overview
Mr107 is an open-source printed circuit board by Maniak003, from the Maniak003/RADEX_MR107_Monitor repository on GitHub. It is a 2-layer board of 35.8 × 70.1 mm with 73 parts on 105 nets, routed with 498 tracks and 56 vias.
It is built around the ATMEGA328-PU, NCP1117ST and W5500, with the H1102NL and MB6S among its other parts. Its parts include 29 capacitors, 17 resistors, 12 connectors, 5 diodes and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)NCP1117ST
1.0 A Low-Dropout Fixed RegulatoronsemiUncategorisedW5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet ControllersH1102NL
SMD-16PXFMR-SMD New Arrivals ROHSPulse ElecUncategorisedMB6S
MBS-55℃~+150℃ 1.1V@400mA 1A 35A 5uA@600V 600V Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
README
README.mdParts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C6, C11, C12, C13, C14, C15, C21, C22 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C9, C10, C17, C25 |
| 3 | mosi | lib:conn_mini | J3, J11, J12 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C16, C19 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C3, C5 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R2, R17 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R14 |
| 2 | 33 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 47u | Inductor_SMD:L_0805_2012Metric | L1, L3 |
| 2 | 49R9 | Resistor_SMD:R_0402_1005Metric | R1, R11 |
| 2 | 6.8n | Capacitor_SMD:C_0402_1005Metric | C23, C24 |
| 2 | 75 | Resistor_SMD:R_0603_1608Metric | R15, R16 |
| 2 | 82 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 8p | Capacitor_SMD:C_0603_1608Metric | C26, C27 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 1000 | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 12.4k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 12MHz | Crystal:Crystal_SMD_0603-4Pin_6.0x3.5mm | Y2 |
| 1 | 1n 2kV | Capacitor_SMD:C_1206_3216Metric | C29 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C28 |
| 1 | 22n | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 8MHz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y3 |
| 1 | ATmega328P | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | H1102NL | MyLibrary:H1102N | D4 |
| 1 | L-KLS12 | MyLibrary:KLS12-108 | J10 |
| 1 | MAX3421 | Package_QFP:PQFP-32_5x5mm_P0.5mm | D1 |
| 1 | MB6S | Package_TO_SOT_SMD:TO-269AA | D5 |
| 1 | N7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | NCP1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | PW | lib:conn_mini | J9 |
| 1 | RxD | lib:conn_mini | J2 |
| 1 | TxD | lib:conn_mini | J8 |
| 1 | USBA DS1095B-R | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J1 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | gnd | lib:conn_mini | J7 |
| 1 | miso | lib:conn_mini | J4 |
| 1 | reset | lib:conn_mini | J6 |
| 1 | sclk | lib:conn_mini | J5 |
More from Maniak003/RADEX_MR107_Monitor
1- 2 layers35.8 × 70.1 mm

Similar boards
- 2 layers45 × 45 mm

- 2 layers160 × 100 mm

RDE board
bartkepl/RDE_board
Resistance DEcade with SCPI, UART, USB, RS485 and ETHERNET in 3U eurocard format
388 partsMIT - 4 layers56.8 × 100 mm

UCB board
bartkepl/UCB_board
Control board for testing concepts with SCPI, UART, USB, RS485 and ETHERNET in pseudo 3U eurocard format
202 partsMIT - 2 layers100 × 100 mm

- 4 layers40 × 31.3 mm

Dps satelite
UbiTrich/home-assistant-poe-satellite
ESP32-S3 PoE voice satellite for Home Assistant
100 parts - 4 layers70.1 × 71.1 mm

- 2 layers

- 4 layers75 × 100 mm

Questions
How big is the Mr107 PCB?
It measures 35.8 × 70.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mr107 use?
73 parts, built around the ATMEGA328-PU, NCP1117ST, W5500 and H1102NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mr107 KiCad files?
From the Maniak003/RADEX_MR107_Monitor repository on GitHub, at the commit this page was made from: the board is kicad/mr107/mr107.kicad_pcb and its schematic kicad/mr107/mr107.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mr107 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Maniak003 before reusing the design.