2 layers80 × 75 mm
2 layers80 × 75 mm
Maqueen red car
mlimonv12/MISE- Size
- 80 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 60
- Pads
- 187
- Tracks, vias
- 276, 36
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Feb 2025
- Updated
- 1 Jul 2025
Overview
Maqueen red car is an open-source printed circuit board by mlimonv12, from the mlimonv12/MISE repository on GitHub. It is a 2-layer board of 80 × 75 mm with 50 parts on 60 nets, routed with 276 tracks and 36 vias.
It is built around the MSP430FR2355TPT, LMV324 and THB001P. Its parts include 13 resistors, 7 capacitors, 3 connectors, 2 ICs and 2 switches. It belongs with the ESP8266 and MSP430 boards of this library.
Main components
3
MSP430FR2355TPT
LQFP-48(7x7)-40℃~+105℃ 1.8V~3.6V 12bit 16 Bit 24MHz 32KB 44 4KB Built-in FRAM MSP430 CPU16 LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
LMV324
SOP-14-40℃~+85℃ 1MHz 2.8dB 250nA 3V~5.5V 4 400V/ms 40mA 40uV/√Hz@1kHz 430uA 5nA 7mV Built-in compensation、ESD protection SOP-14 Operational Amplifier ROHSIDCHIPOperational Amplifier
THB001P
插件-14P,21x17mm插件-14P,21x17mm Multi-Directional Switches ROHSC&KMulti-Directional Switches
README
README.mdView this project on CADLAB.io.
MISE
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | ACLK1, LDR1, LDR2, RST_TDO/TDI1, SCL_I2C1, SDA_I2C1, SMCLK1, UART_RX1, UART_TX1, uC_GND1, uC_VCC1 |
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R9, R10, R13 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C7 |
| 2 | 12.5n | Capacitor_SMD:C_0805_2012Metric | Cload1, Cload2 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | R_PHOTO | MiSE:LDR | R1, R4 |
| 2 | R_POT | MiSE:Trimmer_MiSE | RV1, RV2 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | Crystal | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | Y1 |
| 1 | ESP01 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | LCD_2x16_I2C | MiSE:LCD_2x16_I2C(Midas) | LCD1 |
| 1 | LED | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D1 |
| 1 | LMV324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | LOGO | maqueen_pics:rusteze | G*** |
| 1 | LOGO | maqueen_pics:side1 | G*** |
| 1 | LOGO | maqueen_pics:side2 | G*** |
| 1 | LOGO | maqueen_pics:face | G*** |
| 1 | LOGO | maqueen_pics:lights | G*** |
| 1 | MSP430FR2355TPT | MiSE:QFP50P900X900X160-48N | IC1 |
| 1 | RST | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SBW | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | THB001P | MiSE:THB001P | S1 |
| 1 | conn_DFrobot | MiSE:conn_DFrobot | J1 |
More from mlimonv12/MISE
1Similar boards
- 2 layers80 × 75 mm
- 2 layers75 × 80.2 mm
PCB MiSE
ManuelArgibay/PCB-RC-Car-Project
PCB diseñada para la asignatura de Microcontroladores i Sistemes Empotrats (MiSE) de la Universitat de Barcelona. El diseño fue realizado íntegramente en KiCad, incluyendo esquemático, layout y exportación de Gerbers.
39 parts - 4 layers90 × 90 mm
RF Board
jbrown3859/EE175-SeniorDesign
CubeSat Flight Computer and Radio - EE175 Senior Design F22
130 parts3 - 2 layers63.5 × 78.7 mm
Monitor PCB
AkilaA25/Spoilage-Monitor_PCB
Battery-powered PCB that detects food spoilage in a fridge using a BME680 (VOC/humidity) and SCD40 (CO₂) sensor pair, an MSP430FR2355 MCU, and an IoT module header for phone connectivity.
60 parts1 - 4 layers38 × 35 mm
- 2 layers
- 2 layers63.5 × 78.7 mm
Complete PCB
ahmedaltell1/MCU-Power-Board
Custom MSP430-based PCB integrating regulated power delivery, sensor interfaces, ultrasonic water-level detection, and IoT communication modules.
69 parts - 2 layers20.3 × 58.4 mm
Questions
How big is the Maqueen red car PCB?
It measures 80 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Maqueen red car use?
50 parts, built around the MSP430FR2355TPT, LMV324 and THB001P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Maqueen red car KiCad files?
From the mlimonv12/MISE repository on GitHub, at the commit this page was made from: the board is hw/maqueen/maqueen_red_car.kicad_pcb and its schematic hw/kuchau/maqueen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Maqueen red car design in my own project?
Its repository states no licence, so its author keeps all rights: ask mlimonv12 before reusing the design.