Skip to the content

MSP430FR2355TPT

Texas InstrumentsExtended

-40℃~+105℃ 1.8V~3.6V 12bit 16 Bit 24MHz 32KB 44 4KB Built-in FRAM MSP430 CPU16 LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
ti/MSP430FR2355TPT
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-48(7x7)
Pins
48
In stock
56 at JLCPCB (C1337458)
Used on
12 open-source boards

Overview

The MSP430FR2355TPT is a microcontroller made by Texas Instruments in a LQFP-48(7x7) package with 48 pins. -40℃~+105℃ 1.8V~3.6V 12bit 16 Bit 24MHz 32KB 44 4KB Built-in FRAM MSP430 CPU16 LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MSP430FR2355TPTR, from EasyEDA) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 56 are in stock at JLCPCB (part C1337458). 12 open-source boards in 11 repositories on GitHub use it.

Symbol

1P1.2/UCB0SIMO/UCB0SDA/TB0TRG/OA0-/A2/Veref-2P1.1/UCB0CLK/ACLK/OA0O/COMP0.1/A13P1.0/UCB0STE/SMCLK/COMP0.0/A0/Veref+4TEST/SBWTCK5RST#/NMI/SBWTDIO6DVCC7DVSS8P2.7/TB0CLK/XIN9P2.6/MCLK/XOUT10P2.5/COMP1.011P2.4/COMP1.112P4.7/UCB1SOMI/UCB1SCL13P4.6/UCB1SIMO/UCB1SDA14P4.5/UCB1CLK15P4.4/UCB1STE16P6.6/TB3CLK17P6.5/TB3.618P6.4/TB3.519P6.3/TB3.420P6.2/TB3.321P6.1/TB3.222P6.0/TB3.123P4.3/UCA1TXD/UCA1SIMO/UCA1TXD#24P4.2/UCA1RXD/UCA1SOMI/UCA1RXD#25P4.1/UCA1CLK26P4.0/UCA1STE/ISOTXD/ISORXD27P2.3/TB1TRG28P2.2/TB1CLK29P2.1/TB1.2/COMP1.O30P2.0/TB1.1/COMP0.O31P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/OA1+/A7/VREF+32P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/OA1-/A633P1.5/UCA0CLK/TMS/OA1O/A534P1.4/UCA0STE/TCK/A435P3.7/OA3+36P3.6/OA3-37P3.5/OA3O38P3.4/SMCLK39P5.440P5.3/TB2TRG/A1141P5.2/TB2CLK/A1042P5.1/TB2.2/MFM.TX/A943P5.0/TB2.1/MFM.RX/A844P3.3/OA2+45P3.2/OA2-46P3.1/OA2O47P3.0/MCLK48P1.3/UCB0SOMI/UCB0SCL/OA0+/A3
EasyEDA_Cloud:MSP430FR2355TPTRFrom EasyEDA

Footprint

Package_QFP:LQFP-48_7x7mm_P0.5mmFrom KiCad's library

From the datasheet

16
Supply, least
1.8 V · DVCC, recommended operating minimum; subject to SVS thresholds · p. 27
Supply, most
3.6 V · DVCC, recommended operating maximum · p. 27
Supply, absolute maximum
4.1 V · DVCC to VSS, absolute maximum · p. 27
Works from
-40 °C · Operating free-air temperature minimum · p. 27
Works up to
105 °C · Operating free-air temperature maximum · p. 27
Junction, hottest
115 °C · Operating junction temperature maximum · p. 27
Takes working
3.692 mA · DVCC, typical active FRAM execution, 0% cache hits, 24 MHz, 3.0 V, 25°C · p. 28
Takes at most
3.833 mA · DVCC, largest listed typical active current, FRAM 0% cache hits, 24 MHz, 3.0 V, 105°C · p. 28
Takes asleep
1.49 µA · Typical LPM3 with SVS, 3.0 V, 25°C · p. 29
Takes asleep
620 nA · Typical LPM3.5 with SVS, 3.0 V, 25°C · p. 30
Takes asleep
42 nA · Typical LPM4.5 without SVS, 3.0 V, 25°C · p. 30
Junction to air (QFP 48 pin (PT))
67.6 K/W · Junction-to-ambient thermal resistance, still air · p. 32
Junction to case (QFP 48 pin (PT))
24 K/W · Junction-to-case top thermal resistance · p. 32
Junction to board (QFP 48 pin (PT))
31.6 K/W · Junction-to-board thermal resistance · p. 32
Edge
5 ns · digital-only port fall time typical, VCC = 3.0 V, CL = 20 pF · p. 43
Data rate, most
5 Mbit/s · UART baud rate max, VCC = 2.0 V or 3.0 V · p. 45

What it is and has

16
Core
16-bit RISC, up to 24 MHz · p. 1
Operating temperature
–40°C to 105°C · p. 1
FRAM error correction
Built-in ECC · p. 1
FRAM write protection
Configurable · p. 1
ADC sampling rate
200 ksps · p. 1
ADC reference
1.5, 2.0, or 2.5 V internal shared reference · p. 1
Comparators
Two enhanced comparators · p. 1
Smart analog combo
Four SAC-L3 · p. 1
SAC amplifier
Rail-to-rail input and output · p. 1
Core
16-bit RISC architecture up to 24 MHz · p. 1
PGA noninverting gains
×1, ×2, ×3, ×5, ×9, ×17, ×26, ×33 · p. 1
CPU
16-bit RISC architecture up to 24 MHz · p. 1
UART
2 eUSCI_A modules, supporting UART or SPI · p. 72
Serial interfaces
eUSCI_A supports UART or SPI; eUSCI_B supports SPI or I2C · p. 72
Serial communication features
Automatic baud-rate detection and IrDA · p. 72
ROM libraries
Driver Library and FFT Library · p. 114

Around it

6
cap 10 µF
between DVCC and DVSS; Recommended nominal bulk capacitance; minimum 4.7 uF; tolerance ±20% or better. · p. 27
cap 100 nF
between DVCC and DVSS; Minimum capacitance; low-ESR ceramic; place within a few millimeters of the pin pair. · p. 27
cap 10 µF
between DVCC and DVSS; Use with a 100-nF low-ESR ceramic decoupling capacitor; place within a few millimeters of the pins. · p. 110
cap 100 nF
between DVCC and DVSS; Use with a 10-uF low-ESR ceramic decoupling capacitor; place within a few millimeters of the pins. · p. 110
cap 10 µF
between VREF+/VEREF+ and DVSS; External positive reference decoupling shown in Figure 7-5; place close to the device pins. · p. 113
cap 100 nF
between VREF+/VEREF+ and DVSS; External positive reference decoupling shown in Figure 7-5; place close to the device pins. · p. 113

Specifications

329
ParameterConditionsAs printedPage
Voltage applied at DVCC pin to VSST grademin -0.3 · max 4.1 V27
Voltage applied to any pinT grade; maximum VCC + 0.3 V, limited to 4.1 Vmin -0.3 V27
Current across the whole chip including IO currentsT grademax 50 mA27
Diode current at any device pinT grade; ±2 mA ratingmin -2 · max 2 mA27
Maximum junction temperature, TJ TJT grademax 115 °C27
Storage temperature, Tstg TstgT grademin -40 · max 125 °C27
Electrostatic discharge V(ESD)T grade; Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±1000 Vmax 1000 V27
Electrostatic discharge V(ESD)T grade; Charged-device model (CDM), per JEDEC specification JESD22-C101; ±250 Vmax 250 V27
Supply voltage applied at DVCC pin VCCT grade; minimum supply voltage defined by SVS levelsmin 1.8 · max 3.6 V27
Supply voltage applied at DVSS pin VSST grade; nominaltyp 0 V27
Operating free-air temperature TAT grademin -40 · max 105 °C27
Operating junction temperature TJT grademin -40 · max 115 °C27
Recommended capacitor at DVCC CDVCCT grade; nominal 10 uF; tolerance ±20% or bettermin 4.7 · typ 10 uF27
Processor frequency (maximum MCLK frequency) fSYSTEMT grade; no FRAM wait states, NWAITSx = 0min 0 · max 8 MHz27
Processor frequency (maximum MCLK frequency) fSYSTEMT grade; with FRAM wait states, NWAITSx = 1min 0 · max 16 MHz27
Processor frequency (maximum MCLK frequency) fSYSTEMT grade; with FRAM wait states, NWAITSx = 2min 0 · max 24 MHz27
Maximum ACLK frequency fACLKT grademax 40 kHz28
Maximum SMCLK frequency fSMCLKT grademax 24 MHz28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 25°C; 1 MHz, 0 wait statestyp 555 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 25°C; 8 MHz, 0 wait statestyp 3084 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 25°C; 16 MHz, 1 wait statetyp 3411 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 25°C; 24 MHz, 2 wait statestyp 3692 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 85°C; 1 MHz, 0 wait statestyp 575 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 85°C; 8 MHz, 0 wait statestyp 3207 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 85°C; 16 MHz, 1 wait statetyp 3519 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 85°C; 24 MHz, 2 wait statestyp 3807 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 105°C; 1 MHz, 0 wait statestyp 583 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 105°C; 8 MHz, 0 wait statestyp 3233 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 105°C; 16 MHz, 1 wait statetyp 3545 uA28
IAM, FRAM(0%) IAM, FRAM(0%)T grade; FRAM, 0% cache hit ratio; 3.0 V, 105°C; 24 MHz, 2 wait statestyp 3833 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 25°C; 1 MHz, 0 wait statestyp 261 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 25°C; 8 MHz, 0 wait statestyp 724 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 25°C; 16 MHz, 1 wait statetyp 1245 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 25°C; 24 MHz, 2 wait statestyp 1772 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 85°C; 1 MHz, 0 wait statestyp 272 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 85°C; 8 MHz, 0 wait statestyp 742 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 85°C; 16 MHz, 1 wait statetyp 1267 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 85°C; 24 MHz, 2 wait statestyp 1800 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 105°C; 1 MHz, 0 wait statestyp 283 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 105°C; 8 MHz, 0 wait statestyp 753 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 105°C; 16 MHz, 1 wait statetyp 1281 uA28
IAM, FRAM(100%) IAM, FRAM(100%)T grade; FRAM, 100% cache hit ratio; 3.0 V, 105°C; 24 MHz, 2 wait statestyp 1817 uA28
IAM, RAM IAM, RAMT grade; execution entirely from RAM; 3.0 V, 25°C; 1 MHztyp 285 uA28
IAM, RAM IAM, RAMT grade; execution entirely from RAM; 3.0 V, 25°C; 8 MHztyp 917 uA28
IAM, RAM IAM, RAMT grade; execution entirely from RAM; 3.0 V, 25°C; 16 MHztyp 1627 uA28
IAM, RAM IAM, RAMT grade; execution entirely from RAM; 3.0 V, 25°C; 24 MHztyp 2355 uA28
Active mode current consumption per MHz, execution from FRAM, no wait states dIAM,FRAM/dfT grade; VCC = 3.0 V, TA = 25°C; (IAM, 75% cache hit rate at 8 MHz – IAM, 75% cache hit rate at 1 MHz) / 7 MHztyp 142 uA/MHz28
Low-power mode 0 supply current ILPM0T grade; 2.0 V, 25°C; fSMCLK = 1 MHztyp 199 uA28
Low-power mode 0 supply current ILPM0T grade; 2.0 V, 25°C; fSMCLK = 8 MHztyp 312 uA28
Low-power mode 0 supply current ILPM0T grade; 2.0 V, 25°C; fSMCLK = 16 MHztyp 437 uA28
Low-power mode 0 supply current ILPM0T grade; 2.0 V, 25°C; fSMCLK = 24 MHztyp 637 uA28
Low-power mode 0 supply current ILPM0T grade; 3.0 V, 25°C; fSMCLK = 1 MHztyp 211 uA28
Low-power mode 0 supply current ILPM0T grade; 3.0 V, 25°C; fSMCLK = 8 MHztyp 324 uA28
Low-power mode 0 supply current ILPM0T grade; 3.0 V, 25°C; fSMCLK = 16 MHztyp 449 uA28
Low-power mode 0 supply current ILPM0T grade; 3.0 V, 25°C; fSMCLK = 24 MHztyp 649 uA28
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 3.0 V; –40°C; XT1 = 32768 Hztyp 1.21 uA29
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 3.0 V; 25°C; XT1 = 32768 Hztyp 1.49 uA29
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 3.0 V; 85°C; XT1 = 32768 Hztyp 6.35 · max 21.85 uA29
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 3.0 V; 105°C; XT1 = 32768 Hztyp 13.29 · max 47.87 uA29
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 2.0 V; –40°C; XT1 = 32768 Hztyp 1.18 uA29
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 2.0 V; 25°C; XT1 = 32768 Hztyp 1.45 uA29
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 2.0 V; 85°C; XT1 = 32768 Hztyp 6.28 uA29
Low-power mode 3, includes SVS ILPM3,XT1T grade; VCC = 2.0 V; 105°C; XT1 = 32768 Hztyp 13.17 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 3.0 V; –40°Ctyp 1.01 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 3.0 V; 25°Ctyp 1.29 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 3.0 V; 85°Ctyp 6.15 · max 21.65 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 3.0 V; 105°Ctyp 13.1 · max 47.67 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 2.0 V; –40°Ctyp 0.99 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 2.0 V; 25°Ctyp 1.26 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 2.0 V; 85°Ctyp 6.09 uA29
Low-power mode 3, VLO, excludes SVS ILPM3,VLOT grade; VCC = 2.0 V; 105°Ctyp 12.98 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 3.0 V; –40°C; RTC wakes every second using external 32768-Hz clocktyp 1.15 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 3.0 V; 25°C; RTC wakes every second using external 32768-Hz clocktyp 1.43 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 3.0 V; 85°C; RTC wakes every second using external 32768-Hz clocktyp 6.29 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 3.0 V; 105°C; RTC wakes every second using external 32768-Hz clocktyp 13.24 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 2.0 V; –40°C; RTC wakes every second using external 32768-Hz clocktyp 1.13 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 2.0 V; 25°C; RTC wakes every second using external 32768-Hz clocktyp 1.41 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 2.0 V; 85°C; RTC wakes every second using external 32768-Hz clocktyp 6.23 uA29
Low-power mode 3, RTC, excludes SVS ILPM3, RTCT grade; VCC = 2.0 V; 105°C; RTC wakes every second using external 32768-Hz clocktyp 13.13 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 3.0 V; –40°Ctyp 0.74 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 3.0 V; 25°Ctyp 1 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 3.0 V; 85°Ctyp 5.83 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 3.0 V; 105°Ctyp 12.73 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 2.0 V; –40°Ctyp 0.72 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 2.0 V; 25°Ctyp 0.98 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 2.0 V; 85°Ctyp 5.77 uA29
Low-power mode 4, includes SVS ILPM4, SVST grade; VCC = 2.0 V; 105°Ctyp 12.62 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 3.0 V; –40°Ctyp 0.56 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 3.0 V; 25°Ctyp 0.82 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 3.0 V; 85°Ctyp 5.64 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 3.0 V; 105°Ctyp 12.54 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 2.0 V; –40°Ctyp 0.55 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 2.0 V; 25°Ctyp 0.81 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 2.0 V; 85°Ctyp 5.59 uA29
Low-power mode 4, excludes SVS ILPM4,T grade; VCC = 2.0 V; 105°Ctyp 12.45 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 3.0 V; –40°Ctyp 0.66 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 3.0 V; 25°Ctyp 0.93 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 3.0 V; 85°Ctyp 5.76 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 3.0 V; 105°Ctyp 12.67 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 2.0 V; –40°Ctyp 0.66 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 2.0 V; 25°Ctyp 0.92 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 2.0 V; 85°Ctyp 5.71 uA29
Low-power mode 4, RTC is sourced from VLO, excludes SVS ILPM4, RTC, VLOT grade; VCC = 2.0 V; 105°Ctyp 12.58 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 3.0 V; –40°Ctyp 1.06 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 3.0 V; 25°Ctyp 1.34 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 3.0 V; 85°Ctyp 6.21 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 3.0 V; 105°Ctyp 13.15 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 2.0 V; –40°Ctyp 1.05 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 2.0 V; 25°Ctyp 1.33 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 2.0 V; 85°Ctyp 6.16 uA29
Low-power mode 4, RTC is sourced from XT1, excludes SVS ILPM4, RTC, XT1T grade; VCC = 2.0 V; 105°Ctyp 13.05 uA29
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 3.0 V; –40°C; RTC clocked by XT1, 32768 Hztyp 0.57 uA30
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 3.0 V; 25°C; RTC clocked by XT1, 32768 Hztyp 0.62 uA30
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 3.0 V; 85°C; RTC clocked by XT1, 32768 Hztyp 0.89 · max 2.06 uA30
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 3.0 V; 105°C; RTC clocked by XT1, 32768 Hztyp 1.27 · max 3.21 uA30
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 2.0 V; –40°C; RTC clocked by XT1, 32768 Hztyp 0.55 uA30
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 2.0 V; 25°C; RTC clocked by XT1, 32768 Hztyp 0.59 uA30
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 2.0 V; 85°C; RTC clocked by XT1, 32768 Hztyp 0.84 uA30
Low-power mode 3.5, includes SVS ILPM3.5, XT1T grade; VCC = 2.0 V; 105°C; RTC clocked by XT1, 32768 Hztyp 1.19 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 3.0 V; –40°Ctyp 0.27 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 3.0 V; 25°Ctyp 0.29 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 3.0 V; 85°Ctyp 0.41 · max 0.63 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 3.0 V; 105°Ctyp 0.61 · max 1.13 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 2.0 V; –40°Ctyp 0.25 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 2.0 V; 25°Ctyp 0.27 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 2.0 V; 85°Ctyp 0.37 uA30
Low-power mode 4.5, includes SVS ILPM4.5, SVST grade; VCC = 2.0 V; 105°Ctyp 0.55 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 3.0 V; –40°Ctyp 0.031 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 3.0 V; 25°Ctyp 0.042 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 3.0 V; 85°Ctyp 0.153 · max 0.343 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 3.0 V; 105°Ctyp 0.337 · max 0.832 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 2.0 V; –40°Ctyp 0.025 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 2.0 V; 25°Ctyp 0.036 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 2.0 V; 85°Ctyp 0.128 uA30
Low-power mode 4.5, excludes SVS ILPM4.5T grade; VCC = 2.0 V; 105°Ctyp 0.289 uA30
Timer_BT grade; reference clock: module input clocktyp 5 uA/MHz32
eUSCI_AT grade; UART mode; reference clock: module input clocktyp 7 uA/MHz32
eUSCI_AT grade; SPI mode; reference clock: module input clocktyp 5 uA/MHz32
eUSCI_BT grade; SPI mode; reference clock: module input clocktyp 5 uA/MHz32
eUSCI_BT grade; I2C mode, 100 kbaud; reference clock: module input clocktyp 5 uA/MHz32
RTCT grade; reference clock: 32 kHztyp 85 nA32
CRCT grade; from start to end of operation; reference clock: MCLKtyp 8.5 uA/MHz32
Junction-to-ambient thermal resistance, still air RθJAQFP 48 pin (PT); JEDEC-defined 2S2P systemtyp 67.6 ºC/W32
Junction-to-case (top) thermal resistance RθJCQFP 48 pin (PT); JEDEC-defined 1S0P systemtyp 24 ºC/W32
Junction-to-board thermal resistance RθJBQFP 48 pin (PT); JEDEC-defined 2S2P systemtyp 31.6 ºC/W32
Safe BOR power-down level VBOR, safeT grade; over recommended supply voltage and operating free-air temperature rangesmin 0.1 V33
Safe BOR reset delay tBOR, safeT grade; over recommended supply voltage and operating free-air temperature rangesmin 10 ms33
SVSH current consumption, active mode ISVSH,AMT grade; VCC = 3.6 Vmax 1.5 uA33
SVSH current consumption, low-power modes ISVSH,LPMT grade; VCC = 3.6 Vtyp 240 nA33
SVSH power-down level VSVSH-T grade; over recommended supply voltage and operating free-air temperature rangesmin 1.71 · typ 1.8 · max 1.87 V33
SVSH power-up level VSVSH+T grade; over recommended supply voltage and operating free-air temperature rangesmin 1.76 · typ 1.88 · max 1.99 V33
SVSH hysteresis VSVSH_hysT grade; over recommended supply voltage and operating free-air temperature rangestyp 100 mV33
SVSH propagation delay, active mode tPD,SVSH, AMT grade; over recommended supply voltage and operating free-air temperature rangesmax 10 us33
SVSH propagation delay, low-power modes tPD,SVSH, LPMT grade; over recommended supply voltage and operating free-air temperature rangesmax 100 us33
(Additional) wake-up time to activate the FRAM in AM if previously disabled through the FRAM controller or from a LPM if immediate activation is selected for wake-up tWAKE-UP FRAMDevice grade T, VCC = 3 Vtyp 10 us34
Wake-up time from LPM3 to active mode tWAKE-UP LPM3Device grade T, VCC = 3 Vtyp 10 us34
Wake-up time from LPM4 to active mode tWAKE-UP LPM4Device grade T, VCC = 3 Vtyp 10 us34
Wake-up time from LPM3.5 to active mode tWAKE-UP LPM3.5Device grade T, VCC = 3 Vtyp 350 us34
Wake-up time from LPM4.5 to active mode tWAKE-UP LPM4.5SVSHE = 1, device grade T, VCC = 3 Vtyp 350 us34
Wake-up time from LPM4.5 to active mode tWAKE-UP LPM4.5SVSHE = 0, device grade T, VCC = 3 Vtyp 1 ms34
Wake-up time from RST or BOR event to active mode tWAKE-UP-RESETDevice grade T, VCC = 3 Vtyp 1 ms34
Pulse duration required at RST/NMI pin to accept a reset tRESETDevice grade Tmin 2 us34
XT1 oscillator crystal, low frequency fXT1, LFLFXTBYPASS = 0, device grade Ttyp 32768 Hz35
XT1 oscillator LF duty cycle DCXT1, LFMeasured at MCLK, fLFXT = 32768 Hz, device grade Tmin 30 · max 70 %35
XT1 oscillator logic-level square-wave input frequency fXT1,SWLFXTBYPASS = 1, device grade Ttyp 32768 Hz35
LFXT oscillator logic-level square-wave input duty cycle DCXT1,SWLFXTBYPASS = 1, device grade Tmin 40 · max 60 %35
Oscillation allowance for LF crystals OALFXTLFXTBYPASS = 0, LFXTDRIVE = {3}, fLFXT = 32768 Hz, CL,eff = 12.5 pF, device grade Ttyp 200 kΩ35
Integrated effective load capacitance CL,effDevice grade T; includes parasitic bond and package capacitancetyp 1 pF35
Start-up time tSTART,LFXTfOSC = 32768 Hz, LFXTBYPASS = 0, LFXTDRIVE = {3}, TA = 25°C, CL,eff = 12.5 pF, device grade Ttyp 1000 ms35
Oscillator fault frequency fFault,LFXTXTS = 0, device grade Tmin 0 · max 3500 Hz35
HFXT oscillator crystal frequency, crystal mode fHFXTXT1BYPASS = 0, XTS = 1, XT1HFFREQ = 00, device grade Tmin 1 · max 4 MHz36
HFXT oscillator crystal frequency, crystal mode fHFXTXT1BYPASS = 0, XTS = 1, XT1HFFREQ = 01, device grade Tmin 4.01 · max 6 MHz36
HFXT oscillator crystal frequency, crystal mode fHFXTXT1BYPASS = 0, XTS = 1, XT1HFFREQ = 10, device grade Tmin 6.01 · max 16 MHz36
HFXT oscillator crystal frequency, crystal mode fHFXTXT1BYPASS = 0, XTS = 1, XT1HFFREQ = 11, device grade Tmin 16.01 · max 24 MHz36
HFXT oscillator logic-level square-wave input frequency, bypass mode fHFXT,SWXT1BYPASS = 1, XTS = 1, device grade Tmin 1 · max 24 MHz36
HFXT oscillator duty cycle. DCHFXTMeasured at ACLK, fHFXT,HF = 4 MHz, device grade Tmin 40 · max 60 %36
HFXT oscillator logic-level square-wave input duty cycle DCHFXT,SWXT1BYPASS = 1, device grade Tmin 40 · max 60 %36
Oscillation allowance for HFXT crystals OAHFXTXT1BYPASS = 0, XT1HFSEL = 1, fHFXT,HF = 24 MHz, CL,eff = 18 pF, device grade Ttyp 3.1 Ω36
Start-up time tSTART,HFXTfOSC = 4 MHz, XTS = 1, XT1BYPASS = 0, XT1HFFREQ = 00, XT1DRIVE = 3, TA = 25°C, CL,eff = 18 pF, device grade Ttyp 1.6 ms36
Start-up time tSTART,HFXTfOSC = 24 MHz, XTS = 1, XT1BYPASS = 0, XT1HFFREQ = 00, XT1DRIVE = 3, TA = 25°C, CL,eff = 18 pF, device grade Ttyp 1.1 ms36
Integrated effective load capacitance CL,effDevice grade T; includes parasitic bond and package capacitancetyp 1 pF36
Oscillator fault frequency fFault,HFXTDevice grade Tmin 0 · max 800 kHz36
FLL lock frequency, 24 MHz, 25°C fDCO, FLLMeasured at MCLK, internal trimmed REFO as reference, device grade T, VCC = 3.0 Vmin -1 · max 1 %37
FLL lock frequency, 24 MHz fDCO, FLLMeasured at MCLK, internal trimmed REFO as reference, device grade T, VCC = 3.0 Vmin -2 · max 2 %37
FLL lock frequency, 24 MHz fDCO, FLLMeasured at MCLK, XT1 crystal as reference, device grade T, VCC = 3.0 Vmin -0.5 · max 0.5 %37
Duty cycle fDUTYMeasured at MCLK, XT1 crystal as reference, device grade T, VCC = 3.0 Vmin 40 · typ 50 · max 60 %37
Cycle-to-cycle jitter, 24 MHz JitterccMeasured at MCLK, XT1 crystal as reference, device grade T, VCC = 3.0 Vtyp 0.5 %37
Long-term Jitter, 24 MHz JitterlongMeasured at MCLK, XT1 crystal as reference, device grade T, VCC = 3.0 Vtyp 0.022 %37
FLL lock time tFLL, lockMeasured at MCLK, XT1 crystal as reference, device grade T, VCC = 3.0 Vtyp 200 ms37
DCO frequency 24 MHz fDCO, 24MHzDCORSEL = 111b, DISMOD = 1b, DCOFTRIM = 000b, DCO = 0, device grade T, VCC = 3.0 Vtyp 12.6 MHz37
DCO frequency 24 MHz fDCO, 24MHzDCORSEL = 111b, DISMOD = 1b, DCOFTRIM = 000b, DCO = 511, device grade T, VCC = 3.0 Vtyp 20.5 MHz37
DCO frequency 24 MHz fDCO, 24MHzDCORSEL = 111b, DISMOD = 1b, DCOFTRIM = 111b, DCO = 0, device grade T, VCC = 3.0 Vtyp 29.9 MHz37
DCO frequency 24 MHz fDCO, 24MHzDCORSEL = 111b, DISMOD = 1b, DCOFTRIM = 111b, DCO = 511, device grade T, VCC = 3.0 Vtyp 48.2 MHz37
DCO frequency 20 MHz fDCO, 20MHzDCORSEL = 110b, DISMOD = 1b, DCOFTRIM = 000b, DCO = 0, device grade T, VCC = 3.0 Vtyp 10.5 MHz37
DCO frequency 20 MHz fDCO, 20MHzDCORSEL = 110b, DISMOD = 1b, DCOFTRIM = 000b, DCO = 511, device grade T, VCC = 3.0 Vtyp 17.2 MHz37
DCO frequency 20 MHz fDCO, 20MHzDCORSEL = 110b, DISMOD = 1b, DCOFTRIM = 111b, DCO = 0, device grade T, VCC = 3.0 Vtyp 25.1 MHz37
DCO frequency 20 MHz fDCO, 20MHzDCORSEL = 110b, DISMOD = 1b, DCOFTRIM = 111b, DCO = 511, device grade T, VCC = 3.0 Vtyp 40.4 MHz37
DCO frequency 16 MHz fDCO, 16MHzDCORSEL = 101b, DISMOD = 1b, DCOFTRIM = 000b, DCO = 0, device grade T, VCC = 3.0 Vtyp 8.3 MHz37
DCO frequency 16 MHz fDCO, 16MHzDCORSEL = 101b, DISMOD = 1b, DCOFTRIM = 000b, DCO = 511, device grade T, VCC = 3.0 Vtyp 13.6 MHz37
DCO frequency 16 MHz fDCO, 16MHzDCORSEL = 101b, DISMOD = 1b, DCOFTRIM = 111b, DCO = 0, device grade T, VCC = 3.0 Vtyp 19.9 MHz37
DCO frequency 16 MHz fDCO, 16MHzDCORSEL = 101b, DISMOD = 1b, DCOFTRIM = 111b, DCO = 511, device grade T, VCC = 3.0 Vtyp 32.2 MHz37
REFO oscillator current consumption IREFOTA = 25°C, HP mode (REFLP = 0), device grade T, VCC = 3.0 Vtyp 15 uA40
REFO oscillator current consumption IREFOTA = 25°C, LP mode (REFLP = 1), device grade T, VCC = 3.0 Vtyp 1 uA40
REFO calibrated frequency fREFOMeasured at MCLK, device grade T, VCC = 3.0 Vtyp 32768 Hz40
REFO absolute calibrated tolerance fREFO–40°C to 105°C, device grade T, VCC = 1.8 V to 3.6 Vmin -3.5 · max 3.5 %40
REFO frequency temperature drift dfREFO/dTMeasured at MCLK, device grade T, VCC = 3.0 Vtyp 0.01 %/°C40
REFO frequency supply voltage drift dfREFO/dVCCMeasured at MCLK at 25°C, device grade T, VCC = 1.8 V to 3.6 Vtyp 1 %/V40
REFO duty cycle fDCMeasured at MCLK, device grade T, VCC = 1.8 V to 3.6 Vmin 40 · typ 50 · max 60 %40
REFO start-up time tSTART40% to 60% duty cycle, HP mode (REFLP = 0), device grade T, VCC = 3.0 Vtyp 72 us40
REFO start-up time tSTART40% to 60% duty cycle, LP mode (REFLP = 1), device grade T, VCC = 3.0 Vtyp 75 us40
VLO frequency fVLOMeasured at MCLK, device grade T, VCC = 3.0 Vtyp 10 kHz40
VLO frequency temperature drift dfVLO/dTMeasured at MCLK, device grade T, VCC = 3.0 Vtyp 0.5 %/°C40
VLO frequency supply voltage drift dfVLO/dVCCMeasured at MCLK, device grade T, VCC = 1.8 V to 3.6 Vtyp 4 %/V40
Duty cycle fVLO,DCMeasured at MCLK, device grade T, VCC = 3.0 Vtyp 50 %40
MODOSC frequency fMODOSCDevice grade T, VCC = 3.0 Vmin 3 · typ 3.8 · max 4.6 MHz41
MODOSC frequency temperature drift fMODOSC/dTDevice grade T, VCC = 3.0 Vtyp 0.102 %/℃41
MODOSC frequency supply voltage drift fMODOSC/dVCCDevice grade T, VCC = 1.8 V to 3.6 Vtyp 1.17 %/V41
Duty cycle fMODOSC,DCDevice grade T, VCC = 3.0 Vmin 40 · typ 50 · max 60 %41
Temperature sensor voltage VSENSORTJ = 30℃, device grade T, VCC = 2.0 V or 3.0 Vtyp 788 mV41
Temperature sensor coefficient TCSENSORTJ = 30℃, device grade Ttyp 2.32 mV/°C41
Low-power threshold for eCOMP VeCOMP, LPTJ = 30℃, device grade T, VCC = 2.0 V or 3.0 Vtyp 1.2 V41
Positive output reference at VREF+ pin VREF+, OutputTJ = 30℃, device grade T, VCC = 2.0 V or 3.0 Vtyp 1.2 V41
Positive built-in reference voltage as internal reference VREF+, built-inREFVSEL = {2} for 2.5 V, INTREFEN = 1, device grade T, VCC = 3.0 V; cannot be output to VREF+ pintyp 2.5 V41
Positive built-in reference voltage as internal reference VREF+, built-inREFVSEL = {1} for 2.0 V, INTREFEN = 1, device grade T, VCC = 2.5 V; cannot be output to VREF+ pintyp 2 V41
Positive built-in reference voltage as internal reference VREF+, built-inREFVSEL = {0} for 1.5 V, INTREFEN = 1, device grade T, VCC = 1.8 V; cannot be output to VREF+ pintyp 1.5 V41
RMS noise at VREF NoiseFrom 0.1 Hz to 10 Hz, REFVSEL = {0}, device grade Ttyp 30 · max 130 uV41
VREF ADC BUF_INT buffer offset VOS_BUF_INTTA = 25 °C, ADC ON, REFVSEL = {0}, INTREFEN = 1, EXTREFEN=0, device grade Tmin -16 · max 16 mV41
VREF ADC BUF_EXT buffer offset VOS_BUF_EXTTA = 25 °C, REFVSEL = {0}, EXTREFEN = 1, INTREFEN = 1 or ADC ON, device grade Tmin -16 · max 16 mV41
DVCC minimum voltage, Positive built-in reference active DVCC(min)REFVSEL = {0} for 1.5 V, device grade Tmin 1.8 V41
DVCC minimum voltage, Positive built-in reference active DVCC(min)REFVSEL = {1} for 2.0 V, device grade Tmin 2.2 V41
DVCC minimum voltage, Positive built-in reference active DVCC(min)REFVSEL = {2} for 2.5 V, device grade Tmin 2.7 V41
Operating supply current into DVCC terminal IREF+INTREFEN = 1, device grade T, VCC = 3 Vtyp 19 · max 26 uA41
Operating supply current into DVCC terminal IREF+_ADC_BUFADC ON, EXTREFEN = 0, REFVSEL = {0, 1, 2}, device grade T, VCC = 3 Vtyp 247 · max 400 uA41
VREF maximum load current, VREF+ terminal IO(VREF+)REFVSEL = {0, 1, 2}, DVCC = DVCC(min) for each reference level, INTREFEN = EXTREFEN = 1, device grade T, VCC = 3 Vmin -1000 · max 10 uA42
Load-current regulation, VREF+ terminal ΔVout/ΔIo(VREF+)REFVSEL = {0, 1, 2}, IO(VREF+) = +10 uA or –1000 uA, DVCC = DVCC(min) for each reference level, INTREFEN = EXTREFEN = 1, device grade T, VCC = 3 Vmax 1500 uV/mA42
Capacitance at VREF+ and VREF- terminals CVREF+/-INTREFEN = EXTREFEN = 1, device grade T, VCC = 3 Vmin 0 · max 100 pF42
Temperature coefficient of built-in reference TCREF+REFVSEL = {0, 1, 2}, INTREFEN = EXTREFEN = 1, TA = –40°C to 105°C, device grade T, VCC = 3 Vtyp 24 · max 50 ppm/K42
Power supply rejection ratio (DC) PSRR_DCDVCC = DVCC (min) to DVCC(max), TA = 25°C, REFVSEL = {0, 1, 2}, INTREFEN = EXTREFEN = 1, device grade T, VCC = 3 Vtyp 100 · max 400 uV/V42
Power supply rejection ratio (ac) PSRR_ACdDVCC= 0.1 V at 1 kHz, device grade T, VCC = 3 Vtyp 3 mV/V42
Settling time of reference voltage tSETTLEDVCC = DVCC(min) to DVCC(max), REFVSEL = {0, 1, 2}, INTREFEN = 0 → 1, device grade T, VCC = 3 Vtyp 75 · max 100 us42
Positive-going input threshold voltage VIT+Device grade T, VCC = 2.0 Vmin 0.9 · max 1.5 V43
Positive-going input threshold voltage VIT+Device grade T, VCC = 3.0 Vmin 1.35 · max 2.25 V43
Negative-going input threshold voltage VIT–Device grade T, VCC = 2.0 Vmin 0.5 · max 1.1 V43
Negative-going input threshold voltage VIT–Device grade T, VCC = 3.0 Vmin 0.75 · max 1.65 V43
Input voltage hysteresis (VIT+ – VIT–) VhysDevice grade T, VCC = 2.0 Vmin 0.3 · max 0.8 V43
Input voltage hysteresis (VIT+ – VIT–) VhysDevice grade T, VCC = 3.0 Vmin 0.4 · max 1.2 V43
Pullup or pulldown resistor RPullFor pullup: VIN = VSS; For pulldown: VIN = VCC; device grade Tmin 20 · typ 35 · max 50 kΩ43
Input capacitance, digital only port pins CI,digVIN = VSS or VCC, device grade Ttyp 3 pF43
Input capacitance, port pins with shared analog functions CI,anaVIN = VSS or VCC, device grade Ttyp 5 pF43
High-impedance leakage current Ilkg(Px.y)Device grade T, VCC = 2.0 V or 3.0 V; VSS or VCC applied to pin; input selected, pullup or pulldown disabledmin -30 · max 30 nA43
External interrupt timing (external trigger pulse duration to set interrupt flag) t(int)Ports with interrupt capability, device grade T, VCC = 2.0 V or 3.0 Vmin 50 ns43
High-level output voltage VOHI(OHmax) = –3 mA, device grade T, VCC = 2.0 Vmin 1.4 · max 2 V43
High-level output voltage VOHI(OHmax) = –5 mA, device grade T, VCC = 3.0 Vmin 2.4 · max 3 V43
Low-level output voltage VOLI(OLmax) = 3 mA, device grade T, VCC = 2.0 Vmin 0 · max 0.6 V43
Low-level output voltage VOLI(OLmax) = 5 mA, device grade T, VCC = 3.0 Vmin 0 · max 0.6 V43
Clock output frequency fPort_CLKApplicable to all IO ports, CL = 20 pF, device grade T, VCC = 2.0 Vmin 16 MHz43
Clock output frequency fPort_CLKApplicable to all IO ports, CL = 20 pF, device grade T, VCC = 3.0 Vmin 16 MHz43
Clock output frequency fPort_CLKIOs multiplexed with MCLK and SMCLK, CL = 10 pF, device grade T, VCC = 2.0 Vmin 24 MHz43
Clock output frequency fPort_CLKIOs multiplexed with MCLK and SMCLK, CL = 10 pF, device grade T, VCC = 3.0 Vmin 24 MHz43
Port output rise time, digital only port pins trise,digCL = 20 pF, device grade T, VCC = 2.0 Vtyp 10 ns43
Port output rise time, digital only port pins trise,digCL = 20 pF, device grade T, VCC = 3.0 Vtyp 7 ns43
Port output fall time, digital only port pins tfall,digCL = 20 pF, device grade T, VCC = 2.0 Vtyp 10 ns43
Port output fall time, digital only port pins tfall,digCL = 20 pF, device grade T, VCC = 3.0 Vtyp 5 ns43
Timer_B input clock frequency fTBInternal: SMCLK or ACLK, External: TBCLK, Duty cycle = 50% ±10%, device grade T, VCC = 2.0 V or 3.0 Vmax 24 MHz45
Timer_B capture timing tTB,capAll capture inputs, minimum pulse duration required for capture, device grade T, VCC = 2.0 V or 3.0 Vmin 20 ns45
eUSCI input clock frequency feUSCIInternal: SMCLK or MODCLK, External: UCLK, Duty cycle = 50% ±10%, device grade T, VCC = 2.0 V or 3.0 Vmax 24 MHz45
BITCLK clock frequency (equals baud rate in Mbaud) fBITCLKDevice grade T, VCC = 2.0 V or 3.0 Vmax 5 MHz45
UART receive deglitch time ttUCGLITx = 0, device grade T, VCC = 2.0 V or 3.0 Vtyp 12 ns45
UART receive deglitch time ttUCGLITx = 1, device grade T, VCC = 2.0 V or 3.0 Vtyp 40 ns45
UART receive deglitch time ttUCGLITx = 2, device grade T, VCC = 2.0 V or 3.0 Vtyp 68 ns45
UART receive deglitch time ttUCGLITx = 3, device grade T, VCC = 2.0 V or 3.0 Vtyp 110 ns45
eUSCI input clock frequency feUSCIT grade; internal SMCLK; duty cycle = 50% ±10%max 8 MHz46
STE lead time, STE active to clock tSTE,LEADT grade; UCSTEM = 1; UCMODEx = 01 or 10min 1 UCxCLK cycles46
STE lag time, Last clock to STE inactive tSTE,LAGT grade; UCSTEM = 1; UCMODEx = 01 or 10min 1 UCxCLK cycles46
SOMI input data setup time tSU,MIT grade; VCC = 2.0 Vmin 60 ns46
SOMI input data setup time tSU,MIT grade; VCC = 3.0 Vmin 42 ns46
SOMI input data hold time tHD,MIT grade; VCC = 2.0 Vmin 0 ns46
SOMI input data hold time tHD,MIT grade; VCC = 3.0 Vmin 0 ns46
SIMO output data valid time tVALID,MOT grade; VCC = 2.0 V; UCLK edge to SIMO valid; CL = 20 pFmax 20 ns46
SIMO output data valid time tVALID,MOT grade; VCC = 3.0 V; UCLK edge to SIMO valid; CL = 20 pFmax 20 ns46
SIMO output data hold time tHD,MOT grade; VCC = 2.0 V; CL = 20 pFmin -9 ns46
SIMO output data hold time tHD,MOT grade; VCC = 3.0 V; CL = 20 pFmin -6 ns46
STE lead time, STE active to clock tSTE,LEADT grade; VCC = 2.0 Vmin 55 ns48
STE lead time, STE active to clock tSTE,LEADT grade; VCC = 3.0 Vmin 45 ns48
STE lag time, last clock to STE inactive tSTE,LAGT grade; VCC = 2.0 Vmin 20 ns48
STE lag time, last clock to STE inactive tSTE,LAGT grade; VCC = 3.0 Vmin 20 ns48
STE access time, STE active to SOMI data out tSTE,ACCT grade; VCC = 2.0 Vmax 65 ns48
STE access time, STE active to SOMI data out tSTE,ACCT grade; VCC = 3.0 Vmax 40 ns48
STE disable time, STE inactive to SOMI high impedance tSTE,DIST grade; VCC = 2.0 Vmax 40 ns48
STE disable time, STE inactive to SOMI high impedance tSTE,DIST grade; VCC = 3.0 Vmax 35 ns48
SIMO input data setup time tSU,SIT grade; VCC = 2.0 Vmin 10 ns48
SIMO input data setup time tSU,SIT grade; VCC = 3.0 Vmin 6 ns48
SIMO input data hold time tHD,SIT grade; VCC = 2.0 Vmin 12 ns48
SIMO input data hold time tHD,SIT grade; VCC = 3.0 Vmin 12 ns48
SOMI output data valid time tVALID,SOT grade; VCC = 2.0 V; UCLK edge to SOMI valid; CL = 20 pFmax 69 ns48
SOMI output data valid time tVALID,SOT grade; VCC = 3.0 V; UCLK edge to SOMI valid; CL = 20 pFmax 42 ns48
SOMI output data hold time tHD,SOT grade; VCC = 2.0 V; CL = 20 pFmin 5 ns48
SOMI output data hold time tHD,SOT grade; VCC = 3.0 V; CL = 20 pFmin 5 ns48
eUSCI input clock frequency feUSCIT grade; VCC = 2.0 V, 3.0 V; internal SMCLK or MODCLK, external UCLK; duty cycle = 50% ±10%max 24 MHz50
SCL clock frequency fSCLT grade; VCC = 2.0 V, 3.0 Vmin 0 · max 400 kHz50
Hold time (repeated) START tHD,STAT grade; VCC = 2.0 V, 3.0 V; fSCL = 100 kHzmin 4 us50
Hold time (repeated) START tHD,STAT grade; VCC = 2.0 V, 3.0 V; fSCL > 100 kHzmin 0.6 us50
Setup time for a repeated START tSU,STAT grade; VCC = 2.0 V, 3.0 V; fSCL = 100 kHzmin 4.7 us50
Setup time for a repeated START tSU,STAT grade; VCC = 2.0 V, 3.0 V; fSCL > 100 kHzmin 0.6 us50
Data hold time tHD,DATT grade; VCC = 2.0 V, 3.0 Vmin 0 ns50
Data setup time tSU,DATT grade; VCC = 2.0 V, 3.0 Vmin 250 ns50
Setup time for STOP tSU,STOT grade; VCC = 2.0 V, 3.0 V; fSCL = 100 kHzmin 4 us50
Setup time for STOP tSU,STOT grade; VCC = 2.0 V, 3.0 V; fSCL > 100 kHzmin 0.6 us50
Pulse duration of spikes suppressed by input filter tSPT grade; VCC = 2.0 V, 3.0 V; UCGLITx = 0min 50 · max 600 ns50
Pulse duration of spikes suppressed by input filter tSPT grade; VCC = 2.0 V, 3.0 V; UCGLITx = 1min 25 · max 300 ns50
Pulse duration of spikes suppressed by input filter tSPT grade; VCC = 2.0 V, 3.0 V; UCGLITx = 2min 12.5 · max 150 ns50
Pulse duration of spikes suppressed by input filter tSPT grade; VCC = 2.0 V, 3.0 V; UCGLITx = 3min 6.3 · max 75 ns50
Clock low time-out tTIMEOUTT grade; VCC = 2.0 V, 3.0 V; UCCLTOx = 1typ 36 ms50
Clock low time-out tTIMEOUTT grade; VCC = 2.0 V, 3.0 V; UCCLTOx = 2typ 40 ms50
Clock low time-out tTIMEOUTT grade; VCC = 2.0 V, 3.0 V; UCCLTOx = 3typ 44 ms50
ADC supply voltage DVCCT grade; ADC functional range with 8-bit resolution at 8-bit ENOBmin 2 · max 3.6 V51
Analog input voltage range V(Ax)T grade; All ADC pins; maximum = DVCCmin 0 V51
Operating supply current into DVCC terminal, reference current not included, repeat-single-channel mode IADCT grade; VCC = 2.0 V; fADCCLK = 5 MHz, ADCON = 1, REFON = 0, SHT0 = 0, SHT1 = 0, ADCDIV = 0, ADCCONSEQx = 10btyp 185 uA51
Operating supply current into DVCC terminal, reference current not included, repeat-single-channel mode IADCT grade; VCC = 3.0 V; fADCCLK = 5 MHz, ADCON = 1, REFON = 0, SHT0 = 0, SHT1 = 0, ADCDIV = 0, ADCCONSEQx = 10btyp 280 uA51
Input capacitance CIT grade; VCC = 2.2 V; only one terminal Ax selected at one time from pad to ADC capacitor array, including wiring and padtyp 4.5 · max 5.5 pF51
Input MUX ON resistance RIT grade; DVCC = 2 V, 0 V ≤ VAx ≤ DVCCmax 2 kΩ51
ADC clock frequency fADCCLKT grade; VCC = 2.4 V to 3.6 V; ADC clock, 10-bit modemax 6 MHz51
ADC clock frequency fADCCLKT grade; VCC = 2.4 V to 3.6 V; ADC clock, 12-bit modemax 4.4 MHz51
Turn-on settling time of the ADC tSettlingT grade; error in conversion started after tADCON less than ±0.5 LSB; reference and input signal already settledmax 100 ns51
Sampling time tSampleT grade; VCC = 2.4 V to 3.6 V; RS = 1000 Ω, RI = 4000 Ω, CI = 5.5 pF, Cexternal = 8.0 pF; approximately 7.62 Tau; error less than ±0.5 LSB; 10-bit mode; excludes conversion timemin 0.52 us51
Sampling time tSampleT grade; VCC = 2.4 V to 3.6 V; RS = 1000 Ω, RI = 4000 Ω, CI = 5.5 pF, Cexternal = 8.0 pF; approximately 9.01 Tau; error less than ±0.5 LSB; 12-bit mode; excludes conversion timemin 0.61 us51
Data retention duration tRetentionT grade; TJ = 25°Cmin 100 years57
Data retention duration tRetentionT grade; TJ = 70°Cmin 40 years57
Data retention duration tRetentionT grade; TJ = 115°Cmin 10 years57

Ordering codes, by the datasheet

4
MSP430FR2355TPT
LQFP (48) · 7 mm × 7 mm body; –40°C to 105°C · p. 3
MSP430FR2355TRHA
VQFN (40) · 6 mm × 6 mm body; –40°C to 105°C · p. 3
MSP430FR2355TDBT
TSSOP (38) · 9.7 mm × 4.4 mm body; –40°C to 105°C · p. 3
MSP430FR2355TRSM
VQFN (32) · 4 mm × 4 mm body; –40°C to 105°C · p. 3

Open-source boards using it

12See all 12
  • 4 layers90 × 90 mmRF Board, the printed circuit board in 3D

    RF Board

    jbrown3859/EE175-SeniorDesign

    CubeSat Flight Computer and Radio - EE175 Senior Design F22

    130 parts3
  • 2 layers63.5 × 78.7 mmMonitor PCB, the printed circuit board in 3D

    Monitor PCB

    AkilaA25/Spoilage-Monitor_PCB

    Battery-powered PCB that detects food spoilage in a fridge using a BME680 (VOC/humidity) and SCD40 (CO₂) sensor pair, an MSP430FR2355 MCU, and an IoT module header for phone connectivity.

    60 parts1
  • 4 layers38 × 35 mmRemex v4, the printed circuit board in 3D

    Remex v4

    Montana-Tech-NRMC/remex

    23 parts1
  • 2 layersPlan, the printed circuit board in 3D

    Plan

    runariel/Fuzzy_Car

    Planing to make a self driving car by Arduino

    67 parts1
  • 2 layers63.5 × 78.7 mmComplete PCB, the printed circuit board in 3D

    Complete PCB

    ahmedaltell1/MCU-Power-Board

    Custom MSP430-based PCB integrating regulated power delivery, sensor interfaces, ultrasonic water-level detection, and IoT communication modules.

    69 parts
  • 2 layers20.3 × 58.4 mmMSPY FR2355, the printed circuit board in 3D

    MSPY FR2355

    jrmcauliffe/MSPY-FR2355

    Dev board based on the MSP430FR2355 MCU from TI

    12 parts
  • 2 layers63.5 × 78.7 mmProject 06, the printed circuit board in 3D

    Project 06

    lucadaloia/MSP430-LDR_ECE492

    This project involved the design and manufacturing of a microcontroller-based system focused on analog signal acquisition and real-time user interaction.

    61 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MSP430FR2355TPT?

Yes. The symbol is EasyEDA_Cloud:MSP430FR2355TPTR and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MSP430FR2355TPT?

LQFP-48(7x7), with 48 pins. Its footprint is drawn on this page.

Where is the MSP430FR2355TPT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the MSP430FR2355TPT?

JLCPCB lists it as part C1337458, with 56 in stock; the sellers' links on this page open their listings.

What can replace the MSP430FR2355TPT?

Parts like it in the library: the STM32F103C8T6 by STMicroelectronics, the STM32F030C8T6 by STMicroelectronics, the STM32G070CBT6 by STMicroelectronics and the STM32G030C8T6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MSP430FR2355TPT?

12 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.