Skip to the content
4 layers38 × 35 mmRemex v4, the printed circuit board in 3D
Size
38 × 35 mm
Copper layers
4
Thickness
4.69 mm
Parts
23
Nets
50
Pads
128
Tracks, vias
189, 39
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 Jan 2023
Updated
7 Apr 2023

Overview

Remex v4 is an open-source printed circuit board by Montana-Tech-NRMC, from the Montana-Tech-NRMC/remex repository on GitHub. It is a 4-layer board of 38 × 35 mm with 23 parts on 50 nets, routed with 189 tracks and 39 vias.

It is built around the MSP430FR2355TPT. Its parts include 11 connectors, 7 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the MSP430 boards of this library.

Main components

1

README

README.md

remex board

image

Pin layout:

FunctionPin
I2C SDA4.6
I2C SCL4.7
UART TX4.3
UART RX4.2
ADC01.0
ADC11.1
ADC21.2
ADC31.3
QEI0 A1.4
QEI0 B1.5
QEI1 A1.6
QEI1 B1.7
PWM06.0
PWM16.1

Parts

23
QtyValueFootprintReferences
51kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4, R5, R6, R7
4Conn_01x03_MaleConnector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_HorizontalJ1, J2, J6, J8
2330Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2Conn_01x02_MaleConnector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_HorizontalJ5, J7
2Conn_01x04_MaleConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ4, J11
2Conn_01x04_MaleConnector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_HorizontalJ9, J10
2LEDLED_SMD:LED_0805_2012MetricD1, D2
1CResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderC1
1Conn_01x06_MaleConnector_Molex:Molex_PicoBlade_53261-0671_1x06-1MP_P1.25mm_HorizontalJ3
1LOGOLOGOG***
1MSP430FR2355Package_QFP:LQFP-48_7x7mm_P0.5mmU1

Similar boards

  • 4 layers90 × 90 mmRF Board, the printed circuit board in 3D

    RF Board

    jbrown3859/EE175-SeniorDesign

    CubeSat Flight Computer and Radio - EE175 Senior Design F22

    130 parts3
  • 2 layers63.5 × 78.7 mmMonitor PCB, the printed circuit board in 3D

    Monitor PCB

    AkilaA25/Spoilage-Monitor_PCB

    Battery-powered PCB that detects food spoilage in a fridge using a BME680 (VOC/humidity) and SCD40 (CO₂) sensor pair, an MSP430FR2355 MCU, and an IoT module header for phone connectivity.

    60 parts1
  • 2 layersPlan, the printed circuit board in 3D

    Plan

    runariel/Fuzzy_Car

    Planing to make a self driving car by Arduino

    67 parts1
  • 2 layers63.5 × 78.7 mmComplete PCB, the printed circuit board in 3D

    Complete PCB

    ahmedaltell1/MCU-Power-Board

    Custom MSP430-based PCB integrating regulated power delivery, sensor interfaces, ultrasonic water-level detection, and IoT communication modules.

    69 parts
  • 2 layers20.3 × 58.4 mmMSPY FR2355, the printed circuit board in 3D

    MSPY FR2355

    jrmcauliffe/MSPY-FR2355

    Dev board based on the MSP430FR2355 MCU from TI

    12 parts
  • 2 layers63.5 × 78.7 mmProject 06, the printed circuit board in 3D

    Project 06

    lucadaloia/MSP430-LDR_ECE492

    This project involved the design and manufacturing of a microcontroller-based system focused on analog signal acquisition and real-time user interaction.

    61 partsMIT
  • 2 layers75 × 80.2 mmPCB MiSE, the printed circuit board in 3D

    PCB MiSE

    ManuelArgibay/PCB-RC-Car-Project

    PCB diseñada para la asignatura de Microcontroladores i Sistemes Empotrats (MiSE) de la Universitat de Barcelona. El diseño fue realizado íntegramente en KiCad, incluyendo esquemático, layout y exportación de Gerbers.

    39 parts

Questions

How big is the Remex v4 PCB?

It measures 38 × 35 mm and has 4 copper layers, 4.69 mm thick.

What parts does the Remex v4 use?

23 parts, built around the MSP430FR2355TPT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Remex v4 KiCad files?

From the Montana-Tech-NRMC/remex repository on GitHub, at the commit this page was made from: the board is remex_v4.kicad_pcb and its schematic remex_v4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Remex v4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Montana-Tech-NRMC before reusing the design.