2 layers80 × 75 mm
2 layers75 × 80.2 mm
PCB MiSE
ManuelArgibay/PCB-RC-Car-ProjectPCB diseñada para la asignatura de Microcontroladores i Sistemes Empotrats (MiSE) de la Universitat de Barcelona. El diseño fue realizado íntegramente en KiCad, incluyendo esquemático, layout y exportación de Gerbers.
- Size
- 75 × 80.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 71
- Pads
- 185
- Tracks, vias
- 351, 46
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jun 2026
- Updated
- 12 Jun 2026
Overview
PCB MiSE is an open-source printed circuit board by ManuelArgibay, from the ManuelArgibay/PCB-RC-Car-Project repository on GitHub. It is a 2-layer board of 75 × 80.2 mm with 39 parts on 71 nets, routed with 351 tracks and 46 vias.
It is built around the MSP430FR2355TPT, LMV324 and THB001P. Its parts include 14 resistors, 11 connectors, 4 capacitors, 4 switches and 2 ICs. It belongs with the MSP430 boards of this library.
Main components
3
MSP430FR2355TPT
LQFP-48(7x7)-40℃~+105℃ 1.8V~3.6V 12bit 16 Bit 24MHz 32KB 44 4KB Built-in FRAM MSP430 CPU16 LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
LMV324
SOP-14-40℃~+85℃ 1MHz 2.8dB 250nA 3V~5.5V 4 400V/ms 40mA 40uV/√Hz@1kHz 430uA 5nA 7mV Built-in compensation、ESD protection SOP-14 Operational Amplifier ROHSIDCHIPOperational Amplifier
THB001P
插件-14P,21x17mm插件-14P,21x17mm Multi-Directional Switches ROHSC&KMulti-Directional Switches
README
README.mdProyecto MiSE — Custom PCB
View this project on CADLAB.io.
PCB diseñada para la asignatura de Microcontroladores i Sistemes Empotrats (MiSE) de la Universitat de Barcelona. El diseño fue realizado íntegramente en KiCad, incluyendo esquemático, layout y exportación de Gerbers.
Hardware
| Componente | Descripción |
|---|---|
| MSP430FR2355TPT | Microcontrolador TI MSP430, 48-pin QFP, bajo consumo |
| LMV324 | Amplificador operacional cuádruple (acondicionamiento de señal) |
| THB001P | Switch codificador (C&K Components, 14 pines) |
| LCD 2×16 I2C | Display alfanumérico con interfaz I2C (Midas) |
| LDR | Fotorresistencia para detección de luz |
| WIFI | Módulo de conectividad inalámbrica |
| Crystal | Oscilador de cristal externo |
| Pasivos SMD | Resistencias y condensadores en encapsulado 0805 |
Estructura del repositorio
├── PCB_MiSE.kicad_pcb # Layout de la PCB ├── PCB_MiSE.kicad_sch # Esquemático ├── PCB_MiSE.kicad_pro # Archivo de proyecto KiCad ├── Gerbers/ # Archivos de fabricación ├── Componentes/ │ └── MiSE.pretty/ # Librería de footprints personalizada └── PCB_MiSE-backups/ # Backups automáticos de KiCad
Fabricación
Los archivos Gerber listos para enviar a fabricar están en la carpeta Gerbers/. El diseño es una PCB de 2 capas con componentes SMD (0805) y through-hole.
Herramientas
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J5, J7, J9, J10, J11 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R9, R10 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R14 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 2 | LDR03 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | R8, R15 |
| 2 | R_Potentiometer_Trim | Proyecto:Trimmer_MiSE | RV1, RV2 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 31k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | Clk read conn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x07_Odd_Even | MSP430:conn_DFrobot | J8 |
| 1 | Crystal_GND3 | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Horizontal_1EP_style1 | Y1 |
| 1 | Display | Proyecto:LCD_2x16_I2C(Midas) | J6 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LMV324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | MSP430FR2355TPT | Proyecto:QFP50P900X900X160-48N | IC1 |
| 1 | THB001P | Proyecto:THB001P | S1 |
| 1 | WIFI | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers80 × 75 mm
- 4 layers90 × 90 mm
RF Board
jbrown3859/EE175-SeniorDesign
CubeSat Flight Computer and Radio - EE175 Senior Design F22
130 parts3 - 2 layers63.5 × 78.7 mm
Monitor PCB
AkilaA25/Spoilage-Monitor_PCB
Battery-powered PCB that detects food spoilage in a fridge using a BME680 (VOC/humidity) and SCD40 (CO₂) sensor pair, an MSP430FR2355 MCU, and an IoT module header for phone connectivity.
60 parts1 - 4 layers38 × 35 mm
- 2 layers
- 2 layers63.5 × 78.7 mm
Complete PCB
ahmedaltell1/MCU-Power-Board
Custom MSP430-based PCB integrating regulated power delivery, sensor interfaces, ultrasonic water-level detection, and IoT communication modules.
69 parts - 2 layers20.3 × 58.4 mm
Questions
How big is the PCB MiSE PCB?
It measures 75 × 80.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB MiSE use?
39 parts, built around the MSP430FR2355TPT, LMV324 and THB001P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB MiSE KiCad files?
From the ManuelArgibay/PCB-RC-Car-Project repository on GitHub, at the commit this page was made from: the board is PCB_MiSE.kicad_pcb and its schematic PCB_MiSE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB MiSE design in my own project?
Its repository states no licence, so its author keeps all rights: ask ManuelArgibay before reusing the design.