2 layers143.3 × 68.8 mm
PowerSupply
mlanagan/RemoteHF
Remote HF PCB and Node Red Website for WFView, SteppIRAntenna and Yeasu Rotator
24 parts
2 layers203.2 × 130.8 mm
RemoteHF
mlanagan/RemoteHFRemote HF PCB and Node Red Website for WFView, SteppIRAntenna and Yeasu Rotator
- Size
- 203.2 × 130.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 160
- Pads
- 489
- Tracks, vias
- 859, 80
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 May 2023
- Updated
- 23 Mar 2024
Overview
RemoteHF is an open-source printed circuit board by mlanagan, from the mlanagan/RemoteHF repository on GitHub. It is a 2-layer board of 203.2 × 130.8 mm with 144 parts on 160 nets, routed with 859 tracks and 80 vias.
It is built around the MAX232N, LM358 and ADS1015IDGS, with the MCP4728-E/UN, 2N7002E and J107F1CS1212VDC.36 among its other parts. Its parts include 53 resistors, 18 ICs, 17 capacitors, 17 transistors and 12 diodes.
Main components
6
MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
ADS1015IDGS
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 12 128Hz、250Hz、490Hz、920Hz、1.6kHz、2.4kHz、3.3kHz 1MHz 2 2V~5.5V 2uA 3.3kHz 5ppm/℃ 6.144V Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
MCP4728-E/UN
MSOP-10-40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)
2N7002E
SOT-23-55℃~+150℃ 1 N-channel 2.5V 225mW 3.5Ω@5V 300mA 60V N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETsJ107F1CS1212VDC.36
插件-55℃~+125℃ 10ms 110V@DC、380V@AC 12A 12V 5ms AgSnO2 One set changeover: 1C (SPDT - changeover) 插件 Power Relays ROHSCIT Relay and SwitchPower Relays
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 8.2k | Resistor_SMD:R_0805_2012Metric | R1, R11, R12, R13, R17, R18, R27, R28, R29, R31, R32, R35, R36, R37, R38, R39 +5 |
| 17 | 2N7002E | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q4, Q5, Q6, Q7, Q8, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18 +1 |
| 13 | MOC8112 | Package_DIP:DIP-6_W7.62mm | U1, U2, U8, U9, U10, U11, U12, U13, U16, U17, U18, U19, U20 |
| 12 | 220 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R14, R19, R20, R30, R40, R41, R42, R43, R44 |
| 8 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R33, R34, R50, R51, R52, R53, R54 |
| 7 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C7, C10, C11, C12, C17 |
| 5 | D | Diode_SMD:D_SOD-123F | D8, D9, D10, D11, D12 |
| 4 | 10n | Capacitor_SMD:C_0805_2012Metric | C14, C15, C18, C19 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C4, C6, C8, C9 |
| 4 | 2.2k | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10 |
| 4 | 220u | Capacitor_SMD:CP_Elec_10x10.5 | C1, C2, C3, C5 |
| 4 | FRD13501 | LanaganV2:Relay_Crydom_FRD13501 | K1, K2, K3, K4 |
| 4 | GDT_2Pin | LanaganV2:GDT Bourns 2053 | GD1, GD2, GD3, GD4 |
| 3 | 0 | Resistor_SMD:R_0805_2012Metric | R22, R24, R26 |
| 2 | 3.9k | Resistor_SMD:R_0805_2012Metric | R21, R23 |
| 2 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U7 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 5.6k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | ADS1015IDGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U5 |
| 1 | ANT1 | LanaganV2:SMA_Amphenol_901-144_Vertical_Lge | J6 |
| 1 | ANT2 | LanaganV2:SMA_Amphenol_901-144_Vertical_Lge | J7 |
| 1 | ANT3 | LanaganV2:SMA_Amphenol_901-144_Vertical_Lge | J8 |
| 1 | ANT4 | LanaganV2:SMA_Amphenol_901-144_Vertical_Lge | J9 |
| 1 | IsolatedPower | LanaganV2:ScrewTermConnector 1x3 | J1 |
| 1 | J107F1CS1212VDC.36 | Relay_THT:Relay_SPDT_Finder_36.11 | K5 |
| 1 | LOGO | LanaganV2:BARCLogo | G*** |
| 1 | MAX232 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | MCP4728 | Package_SO:MSOP-10_3x3mm_P0.5mm | U6 |
| 1 | NonIsoPower | LanaganV2:ScrewTermConnector 1x3 | J3 |
| 1 | RX/TX | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J11 |
| 1 | Raspberry_Pi4 | LanaganV2:Raspberry Pi 4B | J2 |
| 1 | SDA100 | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J4 |
| 1 | Transmitter | LanaganV2:SMA_Amphenol_901-144_Vertical_Lge | J10 |
| 1 | Yeasu Rotator | LanaganV2:Connector_Mini-DIN_Female_6Pin_2rows | J5 |
The 138 most common of 144 parts.
More from mlanagan/RemoteHF
1Similar boards
- 2 layers100 × 100 mm
HF PA Radio Interface
RADARC/Modular-PA-Controller
Controller for High Power RF Power Amplifiers based Raspberry Pi Pico
187 parts - 2 layers82.8 × 160 mm
- 4 layers100 × 77 mm
- 4 layers65 × 56 mm
- 2 layers90 × 56.5 mm
SensactHsNano2
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
130 parts4Apache-2.0 - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers100 × 50 mm
Dew Controller
kuellenberg/Dew-Controller
Dew heater controller for telescope dew heater straps
92 parts2 - 2 layers100 × 50 mm
Questions
How big is the RemoteHF PCB?
It measures 203.2 × 130.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RemoteHF use?
144 parts, built around the MAX232N, LM358, ADS1015IDGS and MCP4728-E/UN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RemoteHF KiCad files?
From the mlanagan/RemoteHF repository on GitHub, at the commit this page was made from: the board is KicadPCB/RemoteHF.kicad_pcb and its schematic KicadPCB-AZEL/Antenna Switching.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RemoteHF design in my own project?
Its repository states no licence, so its author keeps all rights: ask mlanagan before reusing the design.