

ECE477-SeniorDesign
- Size
- 89.2 × 77.8 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 108
- Nets
- 186
- Pads
- 485
- Tracks, vias
- 966, 159
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Jan 2025
- Updated
- 1 May 2025
Overview
ECE477-SeniorDesign is an open-source printed circuit board by mjodonnell5, from the mjodonnell5/ECE477-SeniorDesign-7 repository on GitHub. It is a 4-layer board of 89.2 × 77.8 mm with 108 parts on 186 nets, routed with 966 tracks and 159 vias.
It is built around the 74LVC125APW,118-JSM, CP2102-GMR and MCP73871-2CCI/ML, with the TPS63802DLA, USBLC6-2SC6 and CM9V-T1A-32.768KHZ-7PF-100PPM-TA-QC among its other parts. Its parts include 38 capacitors, 30 resistors, 10 connectors, 8 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Main components
774LVC125APW,118-JSM
SOP-14SOP-14 Buffers, Drivers, Receivers, Transceivers ROHSJSMSEMIBuffers, Drivers, Receivers, TransceiversCP2102-GMR
WQFN-28-EP(5x5)-40℃~+85℃ 1Mbps 20mA 3V~3.6V 80uA Transceiver USB 2.0 WQFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersMCP73871-2CCI/ML
QFN-20(4x4)-40℃~+85℃ 1 1.1A 28uA 4.1V~6V 4.2V Charging IC Support Support QFN-20(4x4) Battery Management ROHSMicrochip TechnologyBattery ManagementTPS63802DLA
UncategorisedTexas InstrumentsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)CM9V-T1A-32.768KHZ-7PF-100PPM-TA-QC
SMD1610-2P-40℃~+85℃ 32.768kHz 7pF 90kΩ ±100ppm SMD1610-2P Crystals ROHSMicro CrystalCrystalsPCM12SMTR
SMD-20℃~+85℃ 6V PC Pin Rectangular Columnar SPDT Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide Switches
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R20, R21, R22, R28 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R23, R24, R25, R29 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C38, C39, C40, C43 |
| 4 | 10pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C35, C36, C37, C42 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5, D6, D7 |
| 4 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R26, R27, Rr1 |
| 4 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J2, J3, J4 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R15 |
| 3 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R10, R12 |
| 3 | 4.7 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C29, C30 |
| 3 | JST Conn | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J9, J10, J12 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C33, C34 |
| 2 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R18 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25, C32 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C31 |
| 1 | 0.47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27 |
| 1 | 1.8M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10m | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 470nH | Project_PCB_Library:IND_XFL4015_COC-L | L1 |
| 1 | 511k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 6pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 6pf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 74LVC125APW_118 | PCB_Lib:74LVC | U9 |
| 1 | 91k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | BQ27441-G1 | Package_SON:Texas_S-PDSO-N12 | U5 |
| 1 | Battery Connector | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J6 |
| 1 | CM9V-T1A-32.768KHZ-7PF-100PPM-TA-QC | PCB_Lib:CM9V-T1A-32.768KHZ-7PF-100PPM-TA-QC | Y1 |
| 1 | CP2102-GMR | PCB_Lib:CP2102 | U8 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C41 |
| 1 | Conn_01x02 | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J5 |
| 1 | MCP73871-2CCI/ML | PCB_Lib:MCP73871 | U6 |
| 1 | PCM12SMTR | Button_Switch_SMD:SW_SPDT_PCM12 | SWBOOT1 |
| 1 | PTS526 SK15 SMTR2 LFS | PCB_Lib:PTS256 | U1 |
| 1 | R_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | STM32L496ZGTxP | Package_QFP:LQFP-144_20x20mm_P0.5mm | U2 |
| 1 | TPS63802DLA | Project_PCB_Library:TPS63802DLR | U10 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | USB_A | Connector_USB:USB_A_Receptacle_GCT_USB1046 | J7 |
| 1 | ~ | PCB_Lib:SD_reader_comp | CARD1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | EinkDispCon1 |
Similar boards
- 2 layers63.5 × 40.6 mm

- 2 layers40 × 30 mm

- 4 layers165 × 100 mm

Usb scoring platform
AndrewCraswell/agency
Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.
224 partsMIT - 4 layers79.9 × 84.7 mm

- 2 layers105 × 105 mm

GW A
ayaxan7/SolarAlert
SolarAlert is a compact embedded hardware project designed to monitor the health and performance of solar panels.
97 parts - 2 layers86 × 65 mm

- 2 layers72 × 48 mm

Tareknano
heyitsmeyo/ArduinoWifi-custom
A cutsom arduino uno pcb design that supports Wi-Fi and SD card reader
50 parts - 2 layers65 × 41.5 mm

Pi HAT
Montso/Pi-HAT
KiCAD files of a RPi HAT built for weight data acquistion and actuation of the specimen lift platform.
92 parts
Questions
How big is the ECE477-SeniorDesign PCB?
It measures 89.2 × 77.8 mm and has 4 copper layers, 1.58 mm thick.
What parts does the ECE477-SeniorDesign use?
108 parts, built around the 74LVC125APW,118-JSM, CP2102-GMR, MCP73871-2CCI/ML and TPS63802DLA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ECE477-SeniorDesign KiCad files?
From the mjodonnell5/ECE477-SeniorDesign-7 repository on GitHub, at the commit this page was made from: the board is EInkDisplay-PCB/ECE477-SeniorDesign/ECE477-SeniorDesign.kicad_pcb and its schematic EInkDisplay-PCB/ECE477-SeniorDesign/ECE477-SeniorDesign.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ECE477-SeniorDesign design in my own project?
Its repository states no licence, so its author keeps all rights: ask mjodonnell5 before reusing the design.