Skip to the content

TPS63802DLA

Texas Instruments

Part id
ti/TPS63802DLA
Category
Uncategorised
Pins
10
Used on
9 open-source boards

Overview

The TPS63802DLA is an uncategorised made by Texas Instruments with 10 pins.

PCBKit's library has its KiCad symbol (Celestial_Power_Switchmode:TI TPS63802DLA, from Altium's library), ready for a KiCad board. 9 open-source boards in 9 repositories on GitHub use it.

Symbol

10VIN1EN9L17L22MODE8GND3AGND6VOUT4FB5PG
Celestial_Power_Switchmode:TI TPS63802DLAFrom Altium's library

Footprint

The library has no footprint for this part yet.

Pinout

10
The pins of the TPS63802DLA
PinNameType
1ENPassive
2MODEPassive
3AGNDPassive
4FBPassive
5PGPassive
6VOUTPassive
7L2Passive
8GNDPassive
9L1Passive
10VINPassive

Open-source boards using it

9See all 9
  • 2 layers84 × 22 mmLi Po charger, the printed circuit board in 3D

    Li Po charger

    e-tinkers/18650_battery_charger

    This is a battery charger for Li-Po and modified 18650 Battery Charger with a 3.3/5v LDO.

    36 parts5CC0-1.0
  • 2 layers90 × 100 mmHost shell, the printed circuit board in 3D

    Host shell

    shapoco/wildcardboy

    Handheld Game Console with Replaceable MCU

    241 parts5
  • 4 layers131.3 × 72.4 mmAGBM-02 AA 1-1, the printed circuit board in 3D

    AGBM-02 AA 1-1

    AnasSarkiz/Game-Boy-Enhance

    AGBM-02 tscircuit adaptation — routing-disabled placement work in progress

    245 parts
  • 2 layers56 × 42.5 mmPortable power source, the printed circuit board in 3D

    Portable power source

    Catalysxt/hazard

    Hazard - Delivering portable power to any project

    37 parts
  • 2 layers63.5 × 40.6 mmRp2350a main board, the printed circuit board in 3D

    Rp2350a main board

    Crem2y/rp2350a_main_board

    rp2350a main board

    84 partsMIT
  • 4 layers52 × 36 mmMinipc power, the printed circuit board in 3D

    Minipc power

    jvanderberg/minipc-power

    Small power board for MCU-based emulator builds (Pico / ESP32 class with a 12 V 5" LCD). Runs from USB-C or a 1S2P 18650 pack, charges the pack whenever USB-C is plugged in, and supplies 12 V, 5 V and 3.3 V.

    106 parts
  • 2 layers21.5 × 76.2 mmLablocate, the printed circuit board in 3D

    Lablocate

    klaus-liebler/lablocate

    64 parts

Questions

Is there a KiCad symbol and footprint for the TPS63802DLA?

Yes. The symbol is Celestial_Power_Switchmode:TI TPS63802DLA, both drawn on this page. PCBKit places them on a board for you when you design with it.

Which open-source boards use the TPS63802DLA?

9 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.