
Labathome pcb
klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.

Lablocate is an open-source printed circuit board by klaus-liebler, from the klaus-liebler/lablocate repository on GitHub. It is a 2-layer board of 21.5 × 76.2 mm with 64 parts on 71 nets, routed with 514 tracks and 95 vias.
It is built around the ESP32-C6-MINI-1U-H4, DWM3000 and LSM6DS3TR-C, with the TP4057, TPS63802DLA and AO3400A among its other parts. Its parts include 29 resistors, 11 capacitors, 5 diodes, 4 ICs and 3 transistors. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 5k1 | Resistor_SMD:R_0201_0603Metric | R1, R7, R11, R12, R13, R14, R16, R17, R20, R22, R23, R24, R25, R26 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R10, R15, R18, R19, R29 |
| 6 | u1 | Capacitor_SMD:C_0201_0603Metric | C4, C6, C7, C11, C54, C55 |
| 5 | 22u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C12 |
| 5 | 91k | Resistor_SMD:R_0201_0603Metric | R2, R4, R5, R27, R28 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 18650 | Battery:BatteryHolder_MPD_BH-18650-PC2 | BT1 |
| 1 | 2k2 | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 511k | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BTN | Button_Switch_SMD:SW_SPST_B3U-1000P | SW8 |
| 1 | Buzzer | liebler_MECH:XDCR_CMT-7525-80-SMT-TR_handsolder | BZ1 |
| 1 | CHRG | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | DWM3000 | RF_Module:DWM1000 | DWM1 |
| 1 | ESP32-C6-MINI-1/U | Espressif:ESP32-C6-MINI-1 | U4 |
| 1 | INFO | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | LOGO | LOGO | G*** |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U9 |
| 1 | Pin Header | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | RST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | RX | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | STDBY | LED_SMD:LED_0402_1005Metric | D5 |
| 1 | TP4057 | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | TPS63802 | liebler_SEMICONDUCTORS:DLA0010A | U2 |
| 1 | TX | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | u47 | Inductor_SMD:L_Changjiang_FTC252012S | L1 |

klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.



aniranaway/Drone_Swarm
A fully custom, low-level embedded hardware and firmware platform designed for autonomous multi drone swarms. The system integrates custom STM32-based flight controller PCBs, coreless DC motor drive arrays for a micro…

e-tinkers/18650_battery_charger
This is a battery charger for Li-Po and modified 18650 Battery Charger with a 3.3/5v LDO.



AnasSarkiz/Game-Boy-Enhance
AGBM-02 tscircuit adaptation — routing-disabled placement work in progress
It measures 21.5 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
64 parts, built around the ESP32-C6-MINI-1U-H4, DWM3000, LSM6DS3TR-C and TP4057. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the klaus-liebler/lablocate repository on GitHub, at the commit this page was made from: the board is pcb/lablocate.kicad_pcb and its schematic pcb/lablocate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask klaus-liebler before reusing the design.