

Malibotti stepper pcb
- Size
- 70 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 67
- Pads
- 264
- Tracks, vias
- 505, 177
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Oct 2025
- Updated
- 8 Oct 2026
Overview
Malibotti stepper pcb is an open-source printed circuit board by klaus-liebler, from the klaus-liebler/malibotti repository on GitHub. It is a 2-layer board of 70 × 68 mm with 66 parts on 67 nets, routed with 505 tracks and 177 vias.
It is built around the ESP32-C3-MINI-1, STSPIN220 and TS-1095E-A6B3-D2, with the SK6812MINI-EA among its other parts. Its parts include 26 resistors, 18 capacitors, 6 connectors, 4 ICs and 4 switches. It belongs with the robots and motor control boards and the ESP32 and RISC-V boards of this library.
Main components
4ESP32-C3-MINI-1
--40℃~+81℃ -89dBm 2.4GHz 350mA 3V~3.6V 82mA ESP32-C3 Chip On-board PCB Antenna UART - WiFi Modules ROHSRF CrazyWiFi ModulesSTSPIN220
VFQFPN-16(3x3)-40℃~+150℃ 1.3A 1.8V~10V 2 256、1、4、8、16、32、64、128 400mΩ Yes VFQFPN-16(3x3) Stepper Motor Driver ROHSSTMicroelectronicsStepper Motor DriverTS-1095E-A6B3-D2
SMD-4P,6x6mm2.5N 6.5mm 6mm 6mm Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,6x6mm Tactile Switches ROHSYuandiTactile SwitchesSK6812MINI-EA
SMD-4P,3.2x2.8mm-40℃~+85℃ 0.6mA 1.78mm 100ns 100ns 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 500ns 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,3.2x2.8mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdMalibotti
Malibotti represents my initial effort to develop a drawing robot, building upon the concepts of the ESP32-Drawing-Robot project. Key differentiators include a reduced reliance on 3D-printed parts and a custom PCB that functions dually as an electronic carrier and a mechanical structure. Additionally, a dedicated daughterboard with high-precision Hall-effect sensors provides servo arm position data, facilitating closed-loop feedback control for 360° servos.
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15, R16, R17, R18 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R10, R19, R22, R23, R26 |
| 4 | 1n | Capacitor_SMD:C_0402_1005Metric | C9, C10, C13, C14 |
| 4 | 1r0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R20, R21 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C2, C5, C12, C17 |
| 4 | 5k1 | Resistor_SMD:R_0402_1005Metric | R1, R7, R24, R25 |
| 4 | u1 | Capacitor_SMD:C_0402_1005Metric | C3, C8, C11, C15 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C4 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | 22n | Capacitor_SMD:C_0402_1005Metric | C7, C16 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C6, C18 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | STSPIN220 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U3, U4 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | BTN | liebler_MECH:SW_Push_1P1T_NO_6x6mm_H6.5mm_Reverse | SW8 |
| 1 | Buzzer | liebler_MECH:XDCR_CMT-7525-80-SMT-TR_handsolder | BZ1 |
| 1 | Conn_01x04 | liebler_CONN:JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal_SmallerCourtyard | J6 |
| 1 | ESP32-C3-MINI-1 | Espressif:ESP32-C3-MINI-1 | U1 |
| 1 | Hinge3040 | liebler_MECH:Hinge_3040 | H1 |
| 1 | I2C | liebler_CONN:JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal_SmallerCourtyard | J4 |
| 1 | LOGO | LOGO | G*** |
| 1 | MicroSwitchLeft | liebler_MECH:Omron D2F Left Angled | SW2 |
| 1 | MicroSwitchRight | liebler_MECH:Omron D2F Right Angled | SW3 |
| 1 | RGB3 | liebler_OPTO:SK6812MINI-E_REV | D21 |
| 1 | RST | liebler_MECH:SW_Push_1P1T_NO_6x6mm_H6.5mm_Reverse | SW1 |
| 1 | Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Servo SG90 | liebler_MECH:SG90_vertical_PCB | SRV1 |
| 1 | Stepper 1 | liebler_CONN:JST_XH_5P_SMD | J1 |
| 1 | Stepper 1 | liebler_MECH:28BYJ-48 | ST1 |
| 1 | Stepper 2 | liebler_CONN:JST_XH_5P_SMD | J2 |
| 1 | Stepper 2 | liebler_MECH:28BYJ-48 | ST2 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
More from klaus-liebler/malibotti
3- 2 layers67.5 × 55 mm

- 2 layers70 × 68 mm

- 2 layers100 × 55 mm

Similar boards
- 4 layers100 × 100 mm

Labathome pcb
klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.
292 parts5MIT - 2 layers21.5 × 76.2 mm

- 2 layers65 × 40 mm

LaserProjector REV 04
stanleyondrus/LaserProjectorV2
LaserProjector V2 is a battery-powered, ESP32-based laser XY scanner using stepper motors to deflect the beam. It has auto-homing functionality, and can be controlled wirelessly (Wi-Fi & Bluetooth).
46 parts125 - 2 layers28.2 × 24.5 mm

Mini motor controller
Jana-Marie/mini-motor-controller
A controller for miniature stepper motors
39 parts13CERN-OHL-S-2.0 - 4 layers83 × 55 mm

- 2 layers15.2 × 20.3 mm

- 4 layers83.8 × 53.3 mm

- 4 layers70 × 50 mm

Isc motorbeep
ISC-HEI/isc-motorbeep
ESP32 board driving two bipolar stepper motors and a speaker from 3x AA cells — a complete KiCad 9 schematic authored headlessly via MCP. ERC-clean, netlist-asserted, priced BOM.
69 parts
Questions
How big is the Malibotti stepper pcb PCB?
It measures 70 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Malibotti stepper pcb use?
66 parts, built around the ESP32-C3-MINI-1, STSPIN220, TS-1095E-A6B3-D2 and SK6812MINI-EA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Malibotti stepper pcb KiCad files?
From the klaus-liebler/malibotti repository on GitHub, at the commit this page was made from: the board is malibotti_stepper_pcb/malibotti_stepper_pcb.kicad_pcb and its schematic malibotti_pcb_v1/malibotti.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Malibotti stepper pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask klaus-liebler before reusing the design.