DWM3000

QorvoExtended

- RF Modules ROHS

Part id: qorvo/DWM3000
Category: RF Modules
Pins: 24
In stock: 0 at JLCPCB (C3028890)
Used on: 17 open-source boards

Overview

The DWM3000 is a RF Module made by Qorvo with 24 pins. - RF Modules ROHS.

PCBKit's library has its KiCad symbol (RF_Module:DWM3000, from KiCad's library) and its footprint (RF_Module:DWM1000, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3028890). 17 open-source boards in 14 repositories on GitHub use it.

Symbol

RF_Module:DWM3000From KiCad's library

Footprint

RF_Module:DWM1000From KiCad's library

Pinout

The pins of the DWM3000
Pin	Name	Type
1	EXTON	Output
2	WAKEUP	Input/output
3	RST	Input/output
4	GPIO7	Input/output
5	VDDAON	Power in
6	VDD3V3	Power in
7	VDD3V3	Power in
8	VSS	Power in
9	GPIO6/EXTRXE/SPIHA	Input/output
10	GPIO5/EXTTXE/SPIPOL	Input/output
11	GPIO4/EXTPA	Input/output
12	GPIO3/TXLED	Input/output
13	GPIO2/RXLED	Input/output
14	GPIO1/SFDLED	Input/output
15	GPIO0/RXOKLED	Input/output
16	VSS	Passive
17	SPICS	Input
18	SPIMOSI	Input
19	SPIMISO	Output
20	SPICLK	Input
21	VSS	Passive
22	IRQ/GPIO8	Input/output
23	VSS	Passive
24	VSS	Passive

Order codes

DWM3000LCSC C3028890

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/qorvo/DWM3000" title="DWM3000 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

17See all 17

2 layers50 × 56 mm
Opentag
open-tags/opentag
Open-source UWB Device
40 parts25MIT
4 layers40 × 60 mm
TMDT1UC1
GrimGT/Meridian
Tagged ranging and coordinate position system for FRC events. Using UWB ranging with anchors and tags to provide realtime positioning of robots
35 parts1
8 layers50 × 50 mm
INT R1.0.1
manyetox/Autonomous-Photonics-Carrier
Source-available modular mobile carrier for autonomous photonics experiments using ESP32 control, optical flow, IMU sensing and magnetic wheel encoding.
182 parts1
4 layers71 × 64 mm
UWB
victorstoica114/UWB_Module_ESP_IDF
ESP-IDF 6.0.2 firmware for the custom UWB Module V1.0 Rev.B, based on an ESP32-S3-WROOM-1-N16R8. The same application image runs on every module; persistent identity and runtime configuration select the role and active…
254 parts1
4 layers45 × 49 mm
Swarm drone
aniranaway/Drone_Swarm
A fully custom, low-level embedded hardware and firmware platform designed for autonomous multi drone swarms. The system integrates custom STM32-based flight controller PCBs, coreless DC motor drive arrays for a micro…
108 parts
4 layers70 × 70 mm
449pcb v1
asinghani/drive-by-wireless
F22 Distributed Embedded Final Project: UWB Drive-by-Wireless
56 parts
4 layers20.3 × 49.5 mm
UWB RTLS Node PCB
CaramelFur/UWB-RTLS-Node-PCB
CustomLibs has all custom libraries and 3D models used in this project. This is merged with GeneratedLibs, which contains all the libraries and 3D models from easyeda.
2 parts
4 layers36 × 65 mm
Uwb beacon
dan-stefanov/locatof-hw
Open-source localization project based on UWB Time-of-Flight ranging
111 partsCERN-OHL-P-2.0

Parts like it

Questions

Is there a KiCad symbol and footprint for the DWM3000?

Yes. The symbol is RF_Module:DWM3000 and the footprint RF_Module:DWM1000, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where can I order the DWM3000?

JLCPCB lists it as part C3028890, with 0 in stock; the sellers' links on this page open their listings.

What can replace the DWM3000?

Parts like it in the library: the DWM3000TR13 by Qorvo and the DWM1000 by DecaWave. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DWM3000?

17 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.