Skip to the content
2 layersOpel devboard, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
75
Pads
177
Tracks, vias
366, 29
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
10 Oct 2015
Updated
12 Mar 2016

Overview

Opel devboard is an open-source printed circuit board by MITEVT, from the MITEVT/opel_11U_devboard repository on GitHub. It is a 2-layer board with 36 parts on 75 nets, routed with 366 tracks and 29 vias.

It is built around the MCP2551-I/SN. Its parts include 11 resistors, 9 capacitors, 5 ICs, 5 diodes and 4 connectors. It belongs with the microcontroller boards boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

1

Parts

36
QtyValueFootprintReferences
40.1uFCapacitors_SMD:C_0603_HandSolderingC3, C5, C8, C10
4100Resistors_SMD:R_0603_HandSolderingR2, R3, R4, R6
4LEDLEDs:LED-0805D1, D2, D3, D4
210kResistors_SMD:R_0603_HandSolderingR1, R5
2120Resistors_SMD:R_0603_HandSolderingR7, R8
21uFCapacitors_SMD:C_0805_HandSolderingC7, C9
220kResistors_SMD:R_0603_HandSolderingR10, R11
2CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P4, P5
2MCP2551-I/SNSO-8U1, U4
110uFCapacitors_SMD:C_0805_HandSolderingC4
11=uFCapacitors_SMD:C_0805_HandSolderingC6
11μFCapacitors_SMD:C_0603C13
1200Resistors_SMD:R_0603_HandSolderingR9
1CONN_01X06Pin_Headers:Pin_Header_Straight_1x06P2
1CONN_01X17Pin_Headers:Pin_Header_Straight_1x17P1
1LEDLEDs:LED_0805D5
1LPC11C14Housings_QFP:LQFP-48_7x7mm_Pitch0.5mmU2
1MCP1755TO_SOT_Packages_SMD:SOT-23-5U5
1MCP2515_TSSOPHousings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mmU3
1SPSTButtons_Switches_SMD:SW_SPST_EVPBFSW1
1SPSTButtons_Switches_ThroughHole:SW_Micro_SPSTSW2

More from MITEVT/opel_11U_devboard

1

Similar boards

  • 2 layers68 × 31 mmCanalyze, the printed circuit board in 3D

    Canalyze

    kkuchera/canalyze-hw

    Hardware for a CAN to USB bridge.

    40 parts60MIT
  • 4 layers83.4 × 68.5 mmMs3, the printed circuit board in 3D

    Ms3

    pggood/Megasquirt-MS3-Bootloader

    Bootloader to initialise MS3 if you need to replace the HCS12

    82 parts7
  • 2 layers109 × 95 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/tsys01

    BTA primary mirror thermal monitoring using STM32 and TSYS01

    93 parts4GPL-3.0
  • 2 layers140 × 178.7 mmMswi, the printed circuit board in 3D

    Mswi

    ZeniteSolar/MSWI19

    Steering-wheel Interface

    154 parts3GPL-3.0
  • 2 layers256.5 × 172.9 mmMCB19 panel, the printed circuit board in 3D

    MCB19 panel

    ZeniteSolar/MCB19

    Modulo de carregamento das baterias auxiliares

    411 parts2GPL-3.0
  • 2 layers239.3 × 121.3 mmPanel, the printed circuit board in 3D

    Panel

    ZeniteSolar/MT19

    Tachometer Module for CANBUS with ATmega328p

    252 parts2GPL-3.0
  • 2 layers35.1 × 62.7 mmEMO SN65 OBD, the printed circuit board in 3D

    EMO SN65 OBD

    darshanram008/EMO_OBD_tool

    On board diagnostic tool for Battery management system

    116 parts1
  • 4 layers137.2 × 61.6 mmVCU2.0, the printed circuit board in 3D

    VCU2.0

    milutintech/LADA

    VCU for Lada Niva

    94 parts1

Questions

What parts does the Opel devboard use?

36 parts, built around the MCP2551-I/SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Opel devboard KiCad files?

From the MITEVT/opel_11U_devboard repository on GitHub, at the commit this page was made from: the board is hardware/opel_devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Opel devboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask MITEVT before reusing the design.