

Tv25-cpu small
Automatically exported from code.google.com/p/tvtools
- Size
- 36 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 48
- Pads
- 187
- Tracks, vias
- 389, 29
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 May 2015
- Updated
- 19 Jun 2025
Overview
Tv25-cpu small is an open-source printed circuit board by mirdej, from the mirdej/tvtools repository on GitHub. It is a 2-layer board of 36 × 40 mm with 39 parts on 48 nets, routed with 389 tracks and 29 vias.
It is built around the ESP32-C3-MINI-1, XC6220B331MR and SK6812MINI-E. Its parts include 11 resistors, 6 capacitors, 5 ICs, 5 connectors and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
3ESP32-C3-MINI-1
--40℃~+81℃ -89dBm 2.4GHz 350mA 3V~3.6V 82mA ESP32-C3 Chip On-board PCB Antenna UART - WiFi Modules ROHSRF CrazyWiFi ModulesXC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 5k1 | Resistor_SMD:R_0603_1608Metric | R3, R6, R7, R8, R9, R10, R11 |
| 4 | 2k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 32.768khz | Crystal:Crystal_SMD_G8-2Pin_3.2x1.5mm | Y1 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | BATT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | Btn-1 | Anyma06:DDS001 | SW4 |
| 1 | CHRG | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | Conn_01x10 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | ESP32-C3-MINI-1 | Anyma06:ESP32-C3-MINI-1 | U4 |
| 1 | LOGO | anyma_footprints:logo_anyma | U5 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Prog | Anyma06:ESP-POGO-PROG-THT | J3 |
| 1 | RDY | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | SK6812MINI | Anyma06:SK6812-MINI-HS | D4 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW3 |
| 1 | USB_C_Receptacle_USB2.0 | synkie_footprints:JAE_USB-C_SJ122205 | J4 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | cell-powered | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | pixels | Anyma06:ComboPinhead_03 | J11 |
| 1 | ~ | Package_DFN_QFN:TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm | U3 |
More from mirdej/tvtools
12- 2 layers65.5 × 75.9 mm

- 2 layers57 × 64 mm

- 2 layers31 × 64.8 mm

- 2 layers146.3 × 43.7 mm

- 2 layers24.7 × 34.1 mm

- 2 layers109.5 × 16.2 mm

- 2 layers60 × 80 mm

- 2 layers48.6 × 45.1 mm

5port headphone belkin clone schnittplatz17
mirdej/tvtools
Automatically exported from code.google.com/p/tvtools
20 parts4 - 2 layers166.2 × 20.3 mm

- 2 layers

- 2 layers176.5 × 35.6 mm

- 2 layers22 × 36 mm

Similar boards
- 2 layers56 × 56 mm

- 2 layers74.9 × 40.6 mm

- 4 layers68 × 16 mm

- 2 layers21.3 × 28.1 mm

- 2 layers40 × 50 mm

- 2 layers46 × 46 mm

Mbadge25
Makerville/makerville-badge
Makerville Badge is a simple PCB with a OLED and a ESP32C3
63 parts6CERN-OHL-P-2.0 - 2 layers42 × 67 mm

- 4 layers49.5 × 29 mm

XESC2
ClemensElflein/xESC
The xESC is an easy to use, low cost electronic speed controller (ESC) design for sensored brushless DC (BLDC) motors.
114 parts378
Questions
How big is the Tv25-cpu small PCB?
It measures 36 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tv25-cpu small use?
39 parts, built around the ESP32-C3-MINI-1, XC6220B331MR and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tv25-cpu small KiCad files?
From the mirdej/tvtools repository on GitHub, at the commit this page was made from: the board is kicad/tv.controller2025/tv25-cpu-small/tv25-cpu-small.kicad_pcb and its schematic kicad/5port-headphone-belkin-clone-schnittplatz17./5port-headphone-belkin-clone-schnittplatz17.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tv25-cpu small design in my own project?
Its repository states no licence, so its author keeps all rights: ask mirdej before reusing the design.