6 layers70 × 70 mm
Rp2350-decoder
mikesmitty/rp24-dcc-decoder
DIY DCC decoder for model railroad locomotives in an E24 form factor, powered by an RP2350 (Raspberry Pi Pico 2)
543 parts12
Boards by mikesmitty
20 boardsOpen-source boards designed in KiCad by mikesmitty on GitHub, from 4 repositories. A board’s address here is its repository’s there.
- 4 layers101.2 × 28 mm
Controller
mikesmitty/power-manifold
Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. 100% local, no cloud required.
103 parts3MIT - 4 layers57 × 56.2 mm
- 4 layers85.2 × 39.6 mm
- 2 layers24 × 8.6 mm
E24-receiver board
mikesmitty/rp24-dcc-decoder
DIY DCC decoder for model railroad locomotives in an E24 form factor, powered by an RP2350 (Raspberry Pi Pico 2)
21 parts12 - 2 layers70 × 70 mm
E24-receiver board
mikesmitty/rp24-dcc-decoder
DIY DCC decoder for model railroad locomotives in an E24 form factor, powered by an RP2350 (Raspberry Pi Pico 2)
307 parts12 - 2 layers52.5 × 42 mm
Pico2-test mule
mikesmitty/rp24-dcc-decoder
DIY DCC decoder for model railroad locomotives in an E24 form factor, powered by an RP2350 (Raspberry Pi Pico 2)
71 parts12 - 2 layers50 × 25 mm
Rp24-usb tester
mikesmitty/rp24-dcc-decoder
DIY DCC decoder for model railroad locomotives in an E24 form factor, powered by an RP2350 (Raspberry Pi Pico 2)
40 parts12 - 6 layers19.9 × 8.8 mm
Rp2350-decoder
mikesmitty/rp24-dcc-decoder
DIY DCC decoder for model railroad locomotives in an E24 form factor, powered by an RP2350 (Raspberry Pi Pico 2)
67 parts12 - 4 layers192 × 31.5 mm
Backplane
mikesmitty/power-manifold
Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. 100% local, no cloud required.
92 parts3MIT - 4 layers101.2 × 24 mm
Charger module
mikesmitty/power-manifold
Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. 100% local, no cloud required.
90 parts3MIT - 4 layers43.4 × 20.3 mm
Pcie breakout
mikesmitty/power-manifold
Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. 100% local, no cloud required.
2 parts3MIT - 2 layers128.8 × 11 mm
Status strip
mikesmitty/power-manifold
Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. 100% local, no cloud required.
15 parts3MIT - 2 layers24 × 8.6 mm
- 2 layers40 × 56.4 mm
- 2 layers70 × 70 mm
- 4 layers19.6 × 8.6 mm
- 2 layers42 × 16.8 mm
- 2 layers23 × 34 mm
- 4 layers20 × 20 mm
