

Mycelium pcb sensor
- Size
- 74.5 × 83.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 24
- Pads
- 88
- Tracks, vias
- 249, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Jun 2018
- Updated
- 18 Sep 2022
Overview
Mycelium pcb sensor is an open-source printed circuit board by microresearch, from the microresearch/mycelium repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 74.5 × 83.7 mm with 39 parts on 24 nets, routed with 249 tracks and 33 vias.
It is built around the OP07 and LM1117-3.3. Its parts include 15 connectors, 11 capacitors, 9 resistors and 3 ICs. It belongs with the sensors and measurement boards of this library.
Main components
2OP07
SOP-8-20℃~+85℃ -22V~-3V、3V~22V 1 1.8nA 1.8uV/℃ 10nV/√Hz@1kHz 120dB 15pA/℃ 170V/ms 2.7mA 22V 500kHz 60uV 800pA SOP-8 Operational Amplifier ROHSSlkorOperational AmplifierLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | BREAKOUT | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J3, J33, J34, J35, J36, J37, J38 |
| 5 | 10K | Resistors_SMD:R_0805_HandSoldering | R15, R24, R25, R30, R31 |
| 4 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C26, C28, C31, C33 |
| 3 | 2.2uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Hand | C29, C30, C32 |
| 3 | EDGE | Wire_Pads:SolderWirePad_single_SMD_5x10mm | J39, J40, J41 |
| 2 | 10uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Hand | C8, C9 |
| 2 | Conn_01x02 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J22, J22 |
| 2 | MUSH | Wire_Pads:SolderWirePad_single_1mmDrill | J31, J32 |
| 1 | 100K | Resistors_SMD:R_0805_HandSoldering | R27 |
| 1 | 100R | Resistors_SMD:R_0805_HandSoldering | R26 |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C27 |
| 1 | 150K | Resistors_SMD:R_0805_HandSoldering | R29 |
| 1 | 220nF | Capacitors_SMD:C_0805_HandSoldering | C34 |
| 1 | 390R | Resistors_SMD:R_0805_HandSoldering | R28 |
| 1 | HIH6131 | SMD_Packages:SOIC-8-N | M1 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:TO-263-2 | U2 |
| 1 | LMC555xM | SMD_Packages:SOIC-8-N | U7 |
| 1 | OP07 | SMD_Packages:SOIC-8-N | U6 |
| 1 | RFIN | Wire_Pads:SolderWirePad_single_1mmDrill | J30 |
More from microresearch/mycelium
7- 2 layers245.6 × 85.9 mm

- 2 layers74.5 × 83.7 mm

- 2 layers49.7 × 130 mm

- 2 layers49.7 × 130 mm

- 2 layers74.5 × 83.7 mm

- 2 layers

- 2 layers

Similar boards
- 2 layers130 × 80 mm

- 2 layers118 × 103.5 mm

- 2 layers144.8 × 88.9 mm

- 2 layers256 × 121 mm

Forte PA Deck
SP6GK/Forte-600-HF-RF-Amplifier
Project of 600 W LDMOS amlifier based on 2xMRF300.
170 parts17GPL-3.0 - 2 layers71 × 51 mm

- 2 layers114 × 95 mm

- 4 layers70 × 70.5 mm

PCB FINAL UPDATED
bash227/ECG-Motor-Control-Power-Management-PCB
A multi-function PCB integrating biomedical signal acquisition (ECG), DC motor control, and advanced power management for wearable applications.
111 parts2MIT - 2 layers100 × 82 mm

TXRX Relay Board
SP6GK/TXRX_Relay_Board
A PCB for switching the signal path between RX and TX in a high-power HF amplifier, such as the Forte 600. It includes RX/TX relays, an input SWR bridge, and analog input over power protection.
80 parts2GPL-3.0
Questions
How big is the Mycelium pcb sensor PCB?
It measures 74.5 × 83.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mycelium pcb sensor use?
39 parts, built around the OP07 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mycelium pcb sensor KiCad files?
From the microresearch/mycelium repository on GitHub, at the commit this page was made from: the board is mycelium_pcb/mycelium_pcb_sensor.kicad_pcb and its schematic small_mycelium/small_mycelium.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mycelium pcb sensor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).