Skip to the content
2 layers25.4 × 57.2 mmLoRa Click, the printed circuit board in 3D

Collection of add-on boards in mikroBUS™ standard

Size
25.4 × 57.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
32
Pads
93
Tracks, vias
130, 100
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Aug 2023
Updated
14 Sep 2025

Overview

LoRa Click is an open-source printed circuit board by michpro, from the michpro/mikroBUS repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 25.4 × 57.2 mm with 26 parts on 32 nets, routed with 130 tracks and 100 vias.

It is built around the RA-01SH-P, CA-IS3763HB and MMBT2222A. Its parts include 8 capacitors, 5 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the radio and wireless boards of this library.

Main components

3

README

HLW8032_Click/README.md

HLW8032 Click - energy metering module


Overview

The HLW8032 Click board is a compact energy metering module designed for integration with MikroElektronika's mikroBUS™ ecosystem. It utilizes the HLW8032 integrated circuit, a high-precision single-phase energy measurement chip capable of monitoring active power, voltage, current, and power factor. This board is suitable for applications in smart energy monitoring, IoT-based power management systems, and industrial automation where accurate real-time energy consumption data is required.

Features

  • Energy Metering IC: HLW8032 for precise measurement of voltage (VP), current (IP/IN), and power.
  • Input Connections: 4-pin screw terminal for line (L), neutral (N), and load connections.
  • Shunt Resistor: 2 mΩ for current sensing, rated for high power dissipation.
  • mikroBUS™ Compatibility: Standard mikroBUS™ PCB form factor.
  • Ground Separation: High-voltage ground (HVGND) isolated from low-voltage ground (GND) for safety.

The board supports UART communication at 4800 baud for serial data output, providing registers for power, voltage, current, and energy accumulation.


Schematic diagram

wiring diagram

Visual simulation of a transformerless power supply.

Module visualisation

(click on the image to see the 3D model)

LoRa Click

Assembly

Interactive BOM and placement

Production files

Production files can be found here.


Usage Guide

  • Connection:
    • Connect AC line to J1 (L/N) and load to L1/N1.
    • Plug into mikroBUS™ socket on a host board (e.g., MCU development kit).
    • Power via +5V/+3.3V pins.
  • Communication:
    • UART (TX/RX at 4800 baud, 8N1): Read 24-byte data frames for measurements.
    • PF Pin: Pulse output proportional to active electric energy.
  • Software:
    • Use MikroE libraries or custom code to parse HLW8032 registers.
    • Example: Voltage = (Register Value) * Calibration Factor.
  • Calibration: Adjust via software for shunt and divider ratios.
  • Safety: ** Handle high-voltage sections with care; ensure proper isolation **.

Reporting bugs

Create an issue on GitHub


License

Copyright © 2025 Michal Protasowicki

This project is released under CERN Open Hardware Licence Version 2 - Permissive.

License: CERN-OHL-P-2.0


Support

If You find my projects interesting and You wanted to support my work, You can give me a cup of coffee or a keg of beer :)

PayPal Direct     ko-fi     Coinbase

Parts

26
QtyValueFootprintReferences
3100nfootprints:C_0603_1608MetricC2, C4, C6
210kfootprints:R_0603_1608MetricR2, R3
210ufootprints:C_0603_1608MetricC1, C3
2DNPfootprints:C_0603_1608MetricC7, C8
10Rfootprints:R_0603_1608MetricR5
11k8footprints:R_0603_1608MetricR4
122ufootprints:C_0603_1608MetricC5
12k2footprints:R_0603_1608MetricR1
1ANTfootprints:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMountJ2
1Busyfootprints:LED_0603_1608MetricD2
1CA-IS3763HBfootprints:SSOP-16_3.9x4.9mm_P0.635mmU1
1GPIOfootprints:PinHeader_1x04_P2.54mm_VerticalJ1
1LoRa Click v1.0 by MProfootprints:mikroBUS_module_LJ0
1Logo_Open_Hardware_Smallfootprints:OSHW-Logo2_7.3x6mm_SilkScreenLOGO1
1MMBT2222Afootprints:SOT-23Q1
1PWRfootprints:PinHeader_1x03_P2.54mm_VerticalJP1
1Powerfootprints:LED_0603_1608MetricD1
1RA-01S(H)footprints:RA-01xM1

The 23 most common of 26 parts.

More from michpro/mikroBUS

11
  • 2 layers25.4 × 57.2 mmOpenTherm Click, the printed circuit board in 3D

    OpenTherm Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    58 parts5CERN-OHL-P-2.0
  • 2 layers96.5 × 81.3 mmBluePill base, the printed circuit board in 3D

    BluePill base

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    48 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 57.2 mmHLW8032 Click, the printed circuit board in 3D

    HLW8032 Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    45 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 42.9 mmLIN Click, the printed circuit board in 3D

    LIN Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    34 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 42.9 mmCAN Click, the printed circuit board in 3D

    CAN Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    25 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 57.2 mmSCT-013 UI Click, the printed circuit board in 3D

    SCT-013 UI Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    25 parts5CERN-OHL-P-2.0
  • 2 layers68.6 × 53.3 mmArduino UNO click shield, the printed circuit board in 3D

    Arduino UNO click shield

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    24 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 42.9 mmRS485 Click, the printed circuit board in 3D

    RS485 Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    23 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 42.9 mmI2C 1-Wire Click, the printed circuit board in 3D

    I2C 1-Wire Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    19 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 28.6 mmI2C EEPROM Click, the printed circuit board in 3D

    I2C EEPROM Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    19 parts5CERN-OHL-P-2.0
  • 2 layers25.4 × 42.9 mmETH W5500 mini Click, the printed circuit board in 3D

    ETH W5500 mini Click

    michpro/mikroBUS

    Collection of add-on boards in mikroBUS™ standard

    8 parts5CERN-OHL-P-2.0

Similar boards

  • 4 layers86.4 × 50.8 mmLoRa device, the printed circuit board in 3D

    LoRa device

    indoor-industry/Mercurio-RevB

    A project for a functioning handheld LoRa+GPS radio device

    168 partsGPL-3.0
  • 2 layers75 × 100 mmPhased, the printed circuit board in 3D

    Phased

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    77 parts530
  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 2 layers80 × 107.5 mmMinino, the printed circuit board in 3D

    Minino

    ElectronicCats/Minino

    Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.

    79 parts183GPL-3.0
  • 2 layers92.8 × 71.8 mmUSBSID Pico v1.3f, the printed circuit board in 3D

    USBSID Pico v1.3f

    LouDnl/USBSID-Pico

    USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

    116 parts125GPL-2.0
  • 2 layers16.3 × 11.7 mmBrains, the printed circuit board in 3D

    Brains

    atomic14/ch32v003-audio

    A collection of audio projects for the CH32V003J4M6 RISC-V microcontroller, demonstrating various audio synthesis and playback techniques on an 8-pin, $0.10 microcontroller.

    15 parts78MIT
  • 4 layers125.7 × 76.5 mmUGC Main R4K, the printed circuit board in 3D

    UGC Main R4K

    HandHeldLegend/GC-Ultimate

    The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .

    168 parts62
  • 4 layers90.2 × 95.9 mmADCS board, the printed circuit board in 3D

    ADCS board

    onionharvester/boardwalk

    A little gathering place for my PCBs. This is their favourite hangout spot! 🪼⋆.ೃ࿔*:・

    205 parts55

Questions

How big is the LoRa Click PCB?

It measures 25.4 × 57.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LoRa Click use?

26 parts, built around the RA-01SH-P, CA-IS3763HB and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LoRa Click KiCad files?

From the michpro/mikroBUS repository on GitHub, at the commit this page was made from: the board is LoRa_Click/LoRa_Click.kicad_pcb and its schematic Arduino_UNO_click_shield/Arduino_UNO_click_shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LoRa Click design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).