MatheusCipolotti/STM32_CodesRepository dedicated to storing programming on STM32
STM32 DEV BOARD is an open-source printed circuit board by MatheusCipolotti, from the MatheusCipolotti/STM32_Codes repository on GitHub. It is a 4-layer board of 50 × 50 mm with 51 parts on 57 nets, routed with 376 tracks and 32 vias.
It is built around the CH340C, LM1117DT-3.3 and SM4001, with the LL4148 among its other parts. Its parts include 13 capacitors, 9 diodes, 6 resistors, 4 ICs and 4 connectors. It belongs with the microcontroller boards boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C9, C10, C11, C12, C13 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP3, JP4, JP5, JP8 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R5, R6 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7, D8, D9 |
| 4 | SM4001 | Diode_SMD:D_MELF | D1, D2, D3, D4 |
| 3 | Jumper_2_Open | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP2, JP6, JP7 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U2, U3 |
| 2 | ~ | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 004.026.0000039 | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 8MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J6 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_02x15_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_Vertical | J3 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF | D5 |
| 1 | LOGO | Symbol:icone 7x7 | G*** |
| 1 | STM32F030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |
The 49 most common of 51 parts.
SushantSaroch13/Arduino-Minimal-Design
A minimal Arduino-compatible board built around the ATmega328P-M microcontroller with an integrated CH340E USB-to-Serial interface for direct programming via USB.
Tanmayeers/Projects
Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms
akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.
MatheusCipolotti/PIC_Projects
Repositório dedicado ao armazenamento de projetos utilizando microcontroladores PIC
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
51 parts, built around the CH340C, LM1117DT-3.3, SM4001 and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MatheusCipolotti/STM32_Codes repository on GitHub, at the commit this page was made from: the board is DEV_BOARDS/STM32F030K6T6/Hardware/STM32_DEV_BOARD/STM32_DEV_BOARD.kicad_pcb and its schematic DEV_BOARDS/STM32F030K6T6/Hardware/STM32_DEV_BOARD/Fonte.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MatheusCipolotti before reusing the design.