
Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

Esp8266 devboard is an open-source printed circuit board by masahirosuzuka, from the masahirosuzuka/esp8266_devboard repository on GitHub. It is a 2-layer board of 26.7 × 43.2 mm with 25 parts on 27 nets, routed with 283 tracks and 43 vias.
It is built around the ESP-WROOM-02, FT232RQ and XC6206-2.8V. Its parts include 8 resistors, 6 capacitors, 3 ICs, 3 connectors and 2 diodes. It belongs with the microcontroller boards boards and the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistors_SMD:R_0603 | R5, R6, R7, R8, R9, R10 |
| 2 | 100nF | Capacitors_SMD:C_0603 | C1, C3 |
| 2 | 10uF | Capacitors_SMD:C_0603 | C4, C5 |
| 2 | 270R | Resistors_SMD:R_0603 | R1, R2 |
| 2 | CONN_01X09 | header:Pin_Header_Straight_1x09 | P2, P3 |
| 2 | LED | LEDs:LED-0603 | D1, D2 |
| 1 | 10uF | Capacitors_SMD:C_0805 | C6 |
| 1 | 4.7uF | Capacitors_SMD:C_0805 | C2 |
| 1 | 600mA | Resistors_SMD:R_0805 | FB1 |
| 1 | FT232R | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U1 |
| 1 | MODE | Buttons_Switches_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | RESET | b3u_1110:b3u_1110 | SW2 |
| 1 | USB_OTG | Connect:USB_Micro-B | P1 |
| 1 | XC6206 | TO_SOT_Packages_SMD:SOT-23 | U2 |
| 1 | esp-wroom-02 | esp-wroom-02:esp-wroom-02 | U3 |

Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

ladecadence/GBShooper
Open source hardware GameBoy™ FlashCart Reader/Programmer

mangobanaani/cirradio
Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto

mandraga/SombreroBms
A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).

AlanFord/CentralCommand
Central Command pcb for the Contextual Electronics class

CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

ctu-mrs/mrs_hw_modules
Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.
It measures 26.7 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the ESP-WROOM-02, FT232RQ and XC6206-2.8V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the masahirosuzuka/esp8266_devboard repository on GitHub, at the commit this page was made from: the board is esp8266_devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask masahirosuzuka before reusing the design.