

Gc3 panelized
- Size
- 201.5 × 139.2 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 1,528
- Nets
- 263
- Pads
- 4,424
- Tracks, vias
- 12,312, 1,508
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 May 2017
- Updated
- 12 May 2017
Overview
Gc3 panelized is an open-source printed circuit board by masahirosuzuka, from the masahirosuzuka/GC3 repository on GitHub. It is a 6-layer board of 201.5 × 139.2 mm with 1,528 parts on 263 nets, routed with 12,312 tracks and 1,508 vias.
It is built around the A13, TPS62290DRV and DM3AT-SF-PEJM5, with the TPS2552DBV, AXP209 and H5TQ2G63BFR-H9C among its other parts. Its parts include 380 capacitors, 168 resistors, 84 connectors, 32 inductors and 28 ICs.
Main components
6A13
TQFP-176(20x20)TQFP-176(20x20) Microcontrollers (MCU/MPU/SOC) ROHSAllwinner TechMicrocontroller Units (MCUs/MPUs/SOCs)TPS62290DRV
WSON-6-EP(2x2)-40℃~+85℃@(TA) 1 15uA 1A 2.25MHz 2.3V~6V 600mV~6V Adjustable Buck Buck Built-in Yes WSON-6-EP(2x2) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDM3AT-SF-PEJM5
SMD-25℃~+85℃ 1.68mm Connector and Ejector MicroSD Card (TF Card) No Push-Push SMD SD Card / Memory Card Connector ROHSHirose ElectricSD Card / Memory Card ConnectorTPS2552DBV
SOT-23-6-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active Low High Side Switch Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesAXP209
QFN-48-EP(6x6)Overcurrent Protection、Operating status indication、Adjustable current limiting、Power-on timing control QFN-48-EP(6x6) Power Management - Specialized ROHSX-Powers TechBattery ManagementH5TQ2G63BFR-H9C
-UncategorisedSK HYNIX
Parts
1,528| Qty | Value | Footprint | References |
|---|---|---|---|
| 764 | via:via | , , , , , , , , , , , , , , , +748 | |
| 88 | 0.1uF | Capacitors_SMD:C_0402 | C31, C31, C31, C31, C47, C47, C47, C47, C66, C66, C66, C66, C68, C68, C68, C68 +72 |
| 60 | 10uF/6.3V | COMMON0603:Common_0603 | C12, C12, C12, C12, C13, C13, C13, C13, C15, C15, C15, C15, C16, C16, C16, C16 +44 |
| 48 | 0.1uF/6.3V | Capacitors_SMD:C_0402 | C29, C29, C29, C29, C30, C30, C30, C30, C32, C32, C32, C32, C33, C33, C33, C33 +32 |
| 44 | 22R | EXB28V:EXB18V | RA1, RA1, RA1, RA1, RA2, RA2, RA2, RA2, RA10, RA10, RA10, RA10, RA11, RA11, RA11, RA11 +28 |
| 40 | 47k | COMMON0603:Common_0603 | R18, R18, R18, R18, R20, R20, R20, R20, R21, R21, R21, R21, R22, R22, R22, R22 +24 |
| 28 | 10uF/6.3V | Capacitors_SMD:C_0402 | C36, C36, C36, C36, C39, C39, C39, C39, C41, C41, C41, C41, C48, C48, C48, C48 +12 |
| 28 | 1uF | COMMON0603:Common_0603 | C2, C2, C2, C2, C56, C56, C56, C56, C57, C57, C57, C57, C63, C63, C63, C63 +12 |
| 28 | TESTPOINT | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | P1, P1, P1, P1, P2, P2, P2, P2, P3, P3, P3, P3, P15, P15, P15, P15 +12 |
| 24 | 0.1uF | COMMON0603:Common_0603 | C28, C28, C28, C28, C67, C67, C67, C67, C75, C75, C75, C75, C76, C76, C76, C76 +8 |
| 20 | 100uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C1, C1, C1, C1, C27, C27, C27, C27, C37, C37, C37, C37, C78, C78, C78, C78 +4 |
| 20 | 22uF/6.3V | Capacitors_SMD:C_0402 | C42, C42, C42, C42, C49, C49, C49, C49, C51, C51, C51, C51, C82, C82, C82, C82 +4 |
| 16 | 0.1uF/6.3V | COMMON0603:Common_0603 | C45, C45, C45, C45, C46, C46, C46, C46, C53, C53, C53, C53, C54, C54, C54, C54 |
| 16 | 2.2uH | Inductors_NEOSID:Neosid_Inductor_SMS-ME3015 | L1, L1, L1, L1, L2, L2, L2, L2, L3, L3, L3, L3, L4, L4, L4, L4 |
| 16 | 2k/1% | Resistors_SMD:R_0402 | R19, R19, R19, R19, R68, R68, R68, R68, R69, R69, R69, R69, R74, R74, R74, R74 |
| 16 | FB/2A | Resistors_SMD:R_0805 | L5, L5, L5, L5, L7, L7, L7, L7, L8, L8, L8, L8, L9, L9, L9, L9 |
| 16 | GND | Connect:1pin | P11, P11, P11, P11, P12, P12, P12, P12, P13, P13, P13, P13, P14, P14, P14, P14 |
| 12 | 100k | COMMON0603:Common_0603 | R12, R12, R12, R12, R36, R36, R36, R36, R39, R39, R39, R39 |
| 12 | 1nF | COMMON0603:Common_0603 | C7, C7, C7, C7, C24, C24, C24, C24, C25, C25, C25, C25 |
| 8 | 10uF | COMMON0603:Common_0603 | C21, C21, C21, C21, C26, C26, C26, C26 |
| 8 | 1R | COMMON0603:Common_0603 | R6, R6, R6, R6, R7, R7, R7, R7 |
| 8 | 2.2k | COMMON0603:Common_0603 | R3, R3, R3, R3, R10, R10, R10, R10 |
| 8 | 200k/1% | COMMON0603:Common_0603 | R9, R9, R9, R9, R17, R17, R17, R17 |
| 8 | 20k | COMMON0603:Common_0603 | R37, R37, R37, R37, R38, R38, R38, R38 |
| 8 | 22R | Resistors_SMD:R_0201 | R14, R14, R14, R14, R29, R29, R29, R29 |
| 8 | 22pF | COMMON0603:Common_0603 | C11, C11, C11, C11, C14, C14, C14, C14 |
| 8 | 240R/1% | Resistors_SMD:R_0402 | R26, R26, R26, R26, R66, R66, R66, R66 |
| 8 | 24R | Resistors_SMD:R_0201 | R27, R27, R27, R27, R28, R28, R28, R28 |
| 8 | 30pF | COMMON0603:Common_0603 | C59, C59, C59, C59, C60, C60, C60, C60 |
| 8 | 4.7uF | COMMON0603:Common_0603 | C3, C3, C3, C3, C10, C10, C10, C10 |
| 8 | TPS2552 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-6 | U6, U6, U6, U6, U8, U8, U8, U8 |
| 8 | TPS62290 | TPS62290:TPS62290 | U1, U1, U1, U1, U3, U3, U3, U3 |
| 4 | 100K | COMMON0603:Common_0603 | R42, R42, R42, R42 |
| 4 | 100k/1% | COMMON0603:Common_0603 | R16, R16, R16, R16 |
| 4 | 1k | COMMON0603:Common_0603 | R4, R4, R4, R4 |
| 4 | 210k | COMMON0603:Common_0603 | R11, R11, R11, R11 |
| 4 | 22k | COMMON0603:Common_0603 | R13, R13, R13, R13 |
| 4 | 22uF/6.3V | COMMON0603:Common_0603 | C65, C65, C65, C65 |
| 4 | 240R/1% | COMMON0603:Common_0603 | R5, R5, R5, R5 |
| 4 | 24MHz/20pF/20ppm | ECX32:ecx32 | Y1, Y1, Y1, Y1 |
| 4 | 315k | COMMON0603:Common_0603 | R2, R2, R2, R2 |
| 4 | 47K | COMMON0603:Common_0603 | R40, R40, R40, R40 |
| 4 | 510R | COMMON0603:Common_0603 | R1, R1, R1, R1 |
| 4 | 6.8k/1% | COMMON0603:Common_0603 | R56, R56, R56, R56 |
| 4 | 90R | COMMON0603:Common_0603 | R15, R15, R15, R15 |
| 4 | DIODE | Diodes_SMD:SOD-123 | D1, D1, D1, D1 |
| 4 | DM3AT-SF-PEJM5 | DM3AT-SF-PEJM5:DM3AT-SF-PEJM5 | J2, J2, J2, J2 |
| 4 | GPIO | Pin_Headers:Pin_Header_Straight_2x20 | P17, P17, P17, P17 |
| 4 | JACK | MyConnector:BARREL_JACK | J1, J1, J1, J1 |
| 4 | JTAG | Pin_Headers:Pin_Header_Straight_1x06 | P8, P8, P8, P8 |
| 4 | JUMPER | Resistors_SMD:R_0603 | JP1, JP1, JP1, JP1 |
| 4 | LCD | Pin_Headers:Pin_Header_Straight_2x20 | P7, P7, P7, P7 |
| 4 | POWER | LEDs:LED-0805 | D2, D2, D2, D2 |
| 4 | PWR_ON | Buttons_Switches_SMD:SW_SPST_FSMSM | SW1, SW1, SW1, SW1 |
| 4 | RESET | Buttons_Switches_SMD:SW_SPST_FSMSM | SW2, SW2, SW2, SW2 |
| 4 | TEESTPOINT | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | P16, P16, P16, P16 |
| 4 | UART0 | Pin_Headers:Pin_Header_Straight_1x04 | P9, P9, P9, P9 |
| 4 | UART1 | Pin_Headers:Pin_Header_Straight_1x04 | P10, P10, P10, P10 |
| 4 | UBOOT | Buttons_Switches_SMD:SW_SPST_FSMSM | SW3, SW3, SW3, SW3 |
| 4 | USB_A | MyConnector:USB_A_Vertical | P18, P18, P18, P18 |
| 4 | USB_OTG | MyConnector:USB_Micro-B | P19, P19, P19, P19 |
| 4 | a13 | A13:LQFP-176_20x20mm_Pitch0.4mm | U4, U4, U4, U4 |
| 4 | axp209 | AXP209:TQFP-48-1EP_6x6mm_Pitch0.4mm | U2, U2, U2, U2 |
| 4 | h5tq2g63bfr | FBGA96:FBGA96(HYNIX_SAMSUNG_512MX16_DDR3) | U5, U5, U5, U5 |
More from masahirosuzuka/GC3
1- 6 layers99.1 × 66.8 mm

Similar boards
- 2 layers20.3 × 20.3 mm

- 4 layers80 × 42 mm

Module
vd-rd/sbc_allwinner_a13
Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)
179 parts38 - 6 layers200 × 134 mm

- 4 layers98.7 × 44.7 mm

NanoLogger
TobiasNetzer/nanoLogger
Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.
221 parts - 6 layers100 × 80 mm

- 4 layers35.6 × 17.8 mm

- 4 layers66 × 42 mm

- 6 layers134 × 84.2 mm

Questions
How big is the Gc3 panelized PCB?
It measures 201.5 × 139.2 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Gc3 panelized use?
1,528 parts, built around the A13, TPS62290DRV, DM3AT-SF-PEJM5 and TPS2552DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gc3 panelized KiCad files?
From the masahirosuzuka/GC3 repository on GitHub, at the commit this page was made from: the board is gc3_panelized.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gc3 panelized design in my own project?
Its repository states no licence, so its author keeps all rights: ask masahirosuzuka before reusing the design.