2 layers147 × 92 mm
Van
blinken/vandal
An ESP32-based lighting control system for campervans (or anything else)
227 parts6GPL-3.0
2 layers190.5 × 61 mm
GenericEPaperRemote
marx-merten/sonosremote- Size
- 190.5 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 93
- Pads
- 393
- Tracks, vias
- 964, 316
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Aug 2020
- Updated
- 16 Feb 2024
Overview
GenericEPaperRemote is an open-source printed circuit board by marx-merten, from the marx-merten/sonosremote repository on GitHub. It is a 2-layer board of 190.5 × 61 mm with 116 parts on 93 nets, routed with 964 tracks and 316 vias.
It is built around the FT232RL, WS2812B and BC817. Its parts include 30 diodes, 21 capacitors, 15 resistors, 13 switches and 7 connectors. It belongs with the ESP32 boards of this library.
Main components
3
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C6, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 |
| 13 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29 |
| 12 | D_Small_ALT | Diode_SMD:D_SOT-23_ANK | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D30 |
| 11 | TestPoint | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP7, TP8, TP9, TP10, TP11, TP12 |
| 10 | TactileSwitchSMD6x6 | digikey-footprints:Switch_Tactile_SMD_6x6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 |
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R14, R15 |
| 4 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C4, C8 |
| 3 | 5K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R7 |
| 2 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R12 |
| 2 | 1N5817 | Diode_SMD:D_SMB_Handsoldering | D12, D13 |
| 2 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R9 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, SW14 |
| 2 | Red | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D15, D16 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C7 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J5 |
| 1 | Codingfragments | codingfragment-components:OSSLogo | LOGO1 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | JSerial1 |
| 1 | Display | Connector_JST:JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal | J1 |
| 1 | EInkDisplay-2.9 | ProjectParts:EInkDisplay2.9 | Disp1 |
| 1 | ESP32-WROVER-B_(16MB) | codingfragment-components:XCVR_ESP32-WROVER-B_(16MB) | U1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | Green | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D14 |
| 1 | JTAG | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | NCP1117ST33T3G | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Prog | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J3 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW11 |
| 1 | USB-Vertical | Connector_USB:USB_Micro-B_Molex-105133-0031 | USB1 |
| 1 | USB_PCBConnector | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | USB2 |
| 1 | USB_PCBhorizontal | Connector_USB:USB_Micro-B_Molex_47346-0001 | USB3 |
| 1 | bootloader | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW13 |
| 1 | reset | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW12 |
| 1 | speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
The 112 most common of 116 parts.
Questions
How big is the GenericEPaperRemote PCB?
It measures 190.5 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GenericEPaperRemote use?
116 parts, built around the FT232RL, WS2812B and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GenericEPaperRemote KiCad files?
From the marx-merten/sonosremote repository on GitHub, at the commit this page was made from: the board is pcb/GenericEPaperRemote/GenericEPaperRemote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GenericEPaperRemote design in my own project?
Its repository states no licence, so its author keeps all rights: ask marx-merten before reusing the design.
Similar boards
- 2 layers143.5 × 110.2 mm
Test platform
kwiecinski/MultiChem-Battery-Tester
Multi-chemistry (Lithum, PB and others) battery charger/discharger with capacitance measurement and discharge graph for diffrent charge/load currents.
151 parts2MIT - 2 layers160 × 100.1 mm
- 4 layers50 × 75 mm
FTDIboard
sneakylizard123-4/FTDIboard
FTDIboard is a small USB-to-UART interface that uses the FT232RL and a switchable 3.3V/5V logic rail.
69 parts - 2 layers92.5 × 61.2 mm
- 2 layers147.3 × 95.3 mm
Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0 - 2 layers140 × 72.5 mm
Nixie proj
dm2lct/Nixieclock_kit
This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.
119 parts9GPL-3.0 - 2 layers50 × 50 mm
