2 layers
2 layers92.5 × 61.2 mm
AskSinAnalyzer
stan23/myPCBs21Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
- Size
- 92.5 × 61.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 53
- Pads
- 292
- Tracks, vias
- 615, 93
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 May 2019
- Updated
- 11 Feb 2024
Overview
AskSinAnalyzer is an open-source printed circuit board by stan23, from the stan23/myPCBs repository on GitHub. It is a 2-layer board of 92.5 × 61.2 mm with 55 parts on 53 nets, routed with 615 tracks and 93 vias.
It is built around the ATMEGA328P-AU, CC1101RGP and ESP-WROOM-32D, with the FT232RL, LM1117-3.3 and BC817 among its other parts. Its parts include 18 capacitors, 11 resistors, 6 ICs, 6 connectors and 5 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
ESP-WROOM-32D
-- WiFi Modules ROHSMIWiFi Modules
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)IRLML5203
SOT-231 P-Channel 1.25W 165mΩ@4.5V 2.5V 30V 3A 43pF 510pF 71pF 9.5nC@0V P-Channel ±20V SOT-23 MOSFETs ROHSKUUMOSFETs
README
AskSinAnalyzer/README.mdAskSin Analyzer PCB 
Eine Platine für den AskSinAnalyzer von Jérôme.
Weitere Infos sind im Wiki
Gehäuse
Ein Gehäuse gibt es auf Thingiverse
Bilder
Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitors_SMD:C_0805_HandSoldering | C4, C5, C7, C12, C14, C15, C22, C23, C25, C26 |
| 6 | 10k | Resistors_SMD:R_0805_HandSoldering | R11, R13, R14, R15, R21, R23 |
| 3 | 10u | Capacitors_SMD:C_0805_HandSoldering | C11, C13, C21 |
| 2 | 22u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Hand | C1, C2 |
| 2 | 330 | Resistors_SMD:R_0805_HandSoldering | R12, R24 |
| 2 | BC817 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q11, Q12 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 100k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 10n | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 1M | Resistors_SMD:R_0805_HandSoldering | R22 |
| 1 | 1u | Capacitors_SMD:C_0805_HandSoldering | C24 |
| 1 | 200 | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 4u7 | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Hand | C6 |
| 1 | 8M | myResonators:Resonator_SMD_muRata_CSTCC-CSTCE-universal-3pin_7.2x3.0mm_HandSoldering | Y21 |
| 1 | ATmega328P-AU | myHousings:TQFP-32_7x7mm_Pitch0.8mm_HandSoldering | U22 |
| 1 | Boot | Buttons_Switches_THT:SW_PUSH_6mm | SW12 |
| 1 | Button | Buttons_Switches_THT:SW_PUSH_6mm | SW13 |
| 1 | CC1101 | myRadioModules:CC1101_SMD_THT_Antenna | U21 |
| 1 | Conn_Coaxial | Connectors:SMA_THT_Jack_Straight | J23 |
| 1 | DIP4 | Buttons_Switches_THT:SW_DIP_x4_W7.62mm_Slide | SW11 |
| 1 | ESP-WROOM-32 | myEspModules:ESP-WROOM-32_handsoldering | U12 |
| 1 | FT232RL | myHousings:SSOP-28_5.3x10.2mm_Pitch0.65mm_Handsoldering | U2 |
| 1 | FTDI_ATmega | myPinHeaders:Pin_Header_Straight_1x06_Pitch2.54mm_Tight_Fit | J21 |
| 1 | FTDI_ESP | myPinHeaders:Pin_Header_Straight_1x06_Pitch2.54mm_Tight_Fit | J11 |
| 1 | Ferrite_Bead | Resistors_SMD:R_0805_HandSoldering | FB1 |
| 1 | GREEN | LEDs:LED_D3.0mm_Horizontal_O3.81mm_Z6.0mm | LED21 |
| 1 | IRLML5203 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | ISP | myPinHeaders:Pin_Header_Straight_2x03_Pitch2.54mm_Tight_Fit | J22 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | Reset | Buttons_Switches_THT:SW_PUSH_6mm | SW14 |
| 1 | SW_DPDT_x2 | Buttons_Switches_THT:SW_CuK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | Supply | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | TJCTM24028-SPI | myDisplays:TJCTM24028-SPI | U11 |
| 1 | USB_B_Micro | myConnectors:USB_Micro | J2 |
| 1 | YELLOW | LEDs:LED_D3.0mm_Horizontal_O3.81mm_Z6.0mm | LED11 |
Questions
How big is the AskSinAnalyzer PCB?
It measures 92.5 × 61.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AskSinAnalyzer use?
55 parts, built around the ATMEGA328P-AU, CC1101RGP, ESP-WROOM-32D and FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AskSinAnalyzer KiCad files?
From the stan23/myPCBs repository on GitHub, at the commit this page was made from: the board is AskSinAnalyzer/AskSinAnalyzer.kicad_pcb and its schematic HB-LC-Dim5PWM-CV_AskSinDuino32Shield/HB-LC-Dim5PWM-CV_AskSinDuino32Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AskSinAnalyzer design in my own project?
Its repository states no licence, so its author keeps all rights: ask stan23 before reusing the design.
More from stan23/myPCBs
7- 2 layers32 × 58 mm
HB UNI Sen CAP MOIST
stan23/myPCBs
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
38 parts21 - 2 layers62 × 37.4 mm
HB LC Dim5PWM CV AskSinDuino32Shield
stan23/myPCBs
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
36 parts21 - 2 layers59.7 × 27.9 mm
- 2 layers69.9 × 46.2 mm
- 2 layers34.3 × 17.8 mm
- 2 layers50 × 17.8 mm
Similar boards
- 2 layers200.8 × 100.3 mm
- 2 layers48.5 × 48.5 mm
Hb uni-328p small
c-klinger/AskSinPP-PCB
Collection of my PCBs for building custom Homematic devices using AskSin++
44 parts - 2 layers53.1 × 26.9 mm
HM LC Bl1-FM DC
stan23/HM-LC-Bl1-FM-DC
Nachbau HM-LC-Bl1-FM Rollladenaktor für Gleichstrommotoren (z.B. Plissee)
32 parts2 - 2 layers70 × 95.1 mm
- 2 layers79 × 78 mm
- 2 layers109.3 × 45.4 mm
AVR BRIDGE ATMEGA328P
MCLEANS/AVR-BRIDGE-ATMEGA328P-PCB
PCB design for the AVR-BRIDGE ATMEGA328P test board
55 parts1 - 2 layers49.5 × 111.8 mm
Universal can board
franc0r/universal_can_board
Contains schematic, pcb layout and software of the francor's universal can board.
70 partsBSD-3-Clause - 2 layers144.1 × 108.1 mm
