

HB MOD UART USB
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
- Size
- 34.3 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 17
- Pads
- 78
- Tracks, vias
- 145, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 May 2019
- Updated
- 11 Feb 2024
Overview
HB MOD UART USB is an open-source printed circuit board by stan23, from the stan23/myPCBs repository on GitHub. It is a 2-layer board of 34.3 × 17.8 mm with 20 parts on 17 nets, routed with 145 tracks and 13 vias.
It is built around the FT232RL and IRLML6402. Its parts include 8 capacitors, 6 resistors, 2 ICs, 1 diode and 1 transistor. It belongs with the interfaces and adapters boards of this library.
Main components
2README
AskSinAnalyzer/README.mdAskSin Analyzer PCB 
Eine Platine für den AskSinAnalyzer von Jérôme.

Weitere Infos sind im Wiki
Gehäuse
Ein Gehäuse gibt es auf Thingiverse
Bilder

Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4 |
| 2 | 1k | Resistors_SMD:R_0603_HandSoldering | R3, R5 |
| 1 | 100u / 10V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Wave | C5 |
| 1 | 10K | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 10nF | Capacitors_SMD:C_0603_HandSoldering | C7 |
| 1 | 1K | Resistors_SMD:R_0603_HandSoldering | R2 |
| 1 | 1M | Resistors_SMD:R_0603_HandSoldering | R4 |
| 1 | 270 | Resistors_SMD:R_0603_HandSoldering | R6 |
| 1 | 4.7nF | Capacitors_SMD:C_0603_HandSoldering | C9 |
| 1 | 4.7uF | Capacitors_SMD:C_0603_HandSoldering | C8 |
| 1 | FT232RL | myHousings:SSOP-28_5.3x10.2mm_Pitch0.65mm_Handsoldering | U1 |
| 1 | Ferrite Bead | Inductors_SMD:L_0805_HandSoldering | L1 |
| 1 | HM-MOD-UART | myRadioModules:HM-MOD-UART_SMD | U2 |
| 1 | IRLML6402 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | RX/TX | LEDs:LED_0603_HandSoldering | D1 |
| 1 | USB | myConnectors:USB_A | J1 |
More from stan23/myPCBs
7- 2 layers

- 2 layers92.5 × 61.2 mm

- 2 layers32 × 58 mm

HB UNI Sen CAP MOIST
stan23/myPCBs
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
38 parts21 - 2 layers62 × 37.4 mm

HB LC Dim5PWM CV AskSinDuino32Shield
stan23/myPCBs
Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome
36 parts21 - 2 layers59.7 × 27.9 mm

- 2 layers69.9 × 46.2 mm

- 2 layers50 × 17.8 mm

Similar boards
- 2 layers78.2 × 25.1 mm

Usb iso rs485
gonium/usb-iso-rs485
I connected a lot of USB-RS485 adapters to my smart meter readout software and wasn't happy. Either the device is cheap and broken or works but is very expensive.
39 parts15MIT - 2 layers99.3 × 78 mm

- 2 layers47.6 × 52.1 mm

- 2 layers47.6 × 52.1 mm

- 2 layers66 × 61.1 mm

USH
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
76 parts - 4 layers142.2 × 82.6 mm

A10-A20-OLINUXINO MICRO-4GB Rev D
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
558 parts429GPL-2.0 - 2 layers

- 4 layers81.6 × 88.8 mm

Cheetah MX4-Mini
KaiPereira/Cheetah-MX4-Mini
A powerful yet compact 3D printer motherboard that supports TMC stepsticks, fans, heaters, screens and thermistors
171 parts179
Questions
How big is the HB MOD UART USB PCB?
It measures 34.3 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HB MOD UART USB use?
20 parts, built around the FT232RL and IRLML6402. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HB MOD UART USB KiCad files?
From the stan23/myPCBs repository on GitHub, at the commit this page was made from: the board is HB-MOD-UART-USB/HB-MOD-UART-USB.kicad_pcb and its schematic HB-LC-Dim5PWM-CV_AskSinDuino32Shield/HB-LC-Dim5PWM-CV_AskSinDuino32Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HB MOD UART USB design in my own project?
Its repository states no licence, so its author keeps all rights: ask stan23 before reusing the design.
