Skip to the content
2 layers54.1 × 20.5 mmIRsensormodule, the printed circuit board in 3D

Sensor om bedrijfstoestand van oude poldermolens te bepalen en door te sturen over het LoRaWAN netwerk.

Size
54.1 × 20.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
40
Pads
74
Tracks, vias
89, 13
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Jan 2026
Updated
9 Mar 2026

Overview

IRsensormodule is an open-source printed circuit board by marnix707, from the marnix707/MalenDeMolens repository on GitHub. It is a 2-layer board of 54.1 × 20.5 mm with 21 parts on 40 nets, routed with 89 tracks and 13 vias.

It is built around the ATTINY1614-SSN and 0805 ±1% 2K4. Its parts include 14 connectors, 4 resistors, 1 capacitor, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

MalenDeMolens

Sensor om bedrijfstoestand van oude poldermolens te bepalen en door te sturen over het LoRaWAN netwerk.

Parts

21
QtyValueFootprintReferences
6Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6, J7, J8, J9, J10, J11
2Conn_01x01_SocketConnector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ12, J13
2Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2
2Conn_01x03_SocketConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ3, J14
10805,1.2kResistor_SMD:R_0805_2012MetricR2
10805,100nF,50V,X7RCapacitor_SMD:C_0805_2012MetricC1
10805,10kResistor_SMD:R_0805_2012MetricR1
10805,220Resistor_SMD:R_0805_2012MetricR3
10805,4.7kResistor_SMD:R_0805_2012MetricR4
12N3904Package_TO_SOT_THT:TO-92_InlineQ1
1ATtiny1614-SSPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU5
1Conn_01x02_SocketConnector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_VerticalJ4
1Conn_01x03_SocketConnector_JST:JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_VerticalJ5

Similar boards

  • 4 layers67 × 98 mmSJ-201-R6, the printed circuit board in 3D

    SJ-201-R6

    MycroftAI/hardware-mycroft-mark-II

    Mycroft's Mark II Rpi mechanical, electrical and industrial designs

    235 parts113
  • 2 layers23.7 × 25.5 mmMalenki, the printed circuit board in 3D

    Malenki

    MarkR42/malenki-esc

    A small electronic speed controller for e.g. tiny fighting robots or other rc models

    30 parts7
  • 2 layers157.5 × 81.3 mmCollectorPanel, the printed circuit board in 3D

    CollectorPanel

    tjhiker/Personal-MiniBadges-2025

    My Personal MiniBadges used at SAINTCON 2025

    25 parts7
  • 2 layers179.1 × 67.9 mmControl Board, the printed circuit board in 3D

    Control Board

    Alan-JH/PCB-Heater

    Reflow hotplate PCB design

    77 parts6
  • 2 layers41 × 41 mmRid, the printed circuit board in 3D

    Rid

    swr06/LED-Wearable

    LED Wearable that displays patterns, based on ATTiny1614

    12 parts5MIT
  • 2 layers33 × 23.9 mmESPTiny1614, the printed circuit board in 3D

    ESPTiny1614

    tomtor/ESPTiny

    KiCad ATtiny84/x14/x02 (SMD) and ESP-01 (ESP 8266) PCB boards

    24 parts4GPL-3.0
  • 2 layers30.5 × 15.2 mmAvr attiny1614-mini, the printed circuit board in 3D

    Avr attiny1614-mini

    vladbelous/avr-attiny1614-mini

    AVR attiny1614 (tinyAVR 1-series) mini board

    26 parts4
  • 2 layers53.5 × 26.5 mmSB Pixel Count, the printed circuit board in 3D

    SB Pixel Count

    computergeek1507/SB_Pixel_Count

    SB Pixel Counter

    23 parts3

Questions

How big is the IRsensormodule PCB?

It measures 54.1 × 20.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the IRsensormodule use?

21 parts, built around the ATTINY1614-SSN and 0805 ±1% 2K4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IRsensormodule KiCad files?

From the marnix707/MalenDeMolens repository on GitHub, at the commit this page was made from: the board is Hardware/IRsensormodule.kicad_pcb and its schematic Hardware/IRsensormodule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IRsensormodule design in my own project?

Its repository states no licence, so its author keeps all rights: ask marnix707 before reusing the design.