

Esp8266-flexpower
- Size
- 70 × 62 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 94
- Pads
- 328
- Tracks, vias
- 438, 111
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Jul 2024
- Updated
- 6 Nov 2026
Overview
Esp8266-flexpower is an open-source printed circuit board by marmbrus, from the marmbrus/circuits repository on GitHub. It is a 4-layer board of 70 × 62 mm with 113 parts on 94 nets, routed with 438 tracks and 111 vias.
It is built around the CH340C, ESP-12F and TPS63070RNMR, with the B3B-XH-A(LF)(SN), LM339 and SPX3940AM3-L-3-3/TR among its other parts. Its parts include 45 resistors, 27 capacitors, 9 ICs, 8 diodes and 4 transistors. It belongs with the ESP8266 boards of this library.
Main components
10CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesTPS63070RNMR
VQFN-15-HR(2.5x3)-40℃~+125℃@(TJ) 1 2.4MHz 2.5V~9V 2A 2V~16V 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VQFN-15-HR(2.5x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersB3B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x3P 2.5mm 250V 3 3A 3P 5.75mm 7mm 9.9mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board ConnectorLM339
SOP-140℃~+70℃ 1.1mA 1.5mV 150ns 2.3nA 2V~32V 32V 57nA DTL、TTL、CMOS Four channels Open Collector SOP-14 Comparators ROHSJSMSEMIComparatorsSPX3940AM3-L-3-3/TR
SOT-223-3-40℃~+125℃@(Tj) 1 16V 1A 25mA 280mV@(1A) 3.3V 400uVrms Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BM04B-SRSS-TB(LF)(SN)
SMD,P=1mm-25℃~+85℃ 1 1A 1mm 1x4P 3.6mm 4 4.25mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SR Surface Mount,Vertical Tin UL94V-0 White SMD,P=1mm Wire To Board Connector ROHSJSTWire To Board ConnectorB3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile SwitchesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
readme.mdPlugins
Template Setup
Preferences -> Configure Paths...
- KICAD_USER_TEMPLATE_DIR=~/workspace/circuits/templates
Component Setup
easyeda2kicad
- github
easyeda2kicad --output ~/workspace/circuits/libraries/easyeda2kicad --full --lcsc_id=...
Schematics Editor -> Preferences -> Manage Symbol Libraries...
easyeda2kicad -> circuits/libraries/easyeda2kicad/easyeda2kicad.kicad_sym
PCB Editor -> Preferences -> Manage Footprint Libraries...
easyeda2kicad -> circuits/libraries/easyeda2kicad/easyeda2kicad.pretty
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R9, R12, R18, R19, R20, R21, R22, R44 |
| 7 | 10uf | Capacitor_SMD:C_0603_1608Metric | C6, C8, C13, C17, C23, C25, C26 |
| 6 | 150 | Resistor_SMD:R_0603_1608Metric | R8, R26, R29, R32, R35, R45 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D4, D5, D6, D8 |
| 5 | 100nf | Capacitor_SMD:C_0603_1608Metric | C7, C12, C14, C15, C18 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R28, R31, R34, R37 |
| 4 | 1uf | Capacitor_SMD:C_0603_1608Metric | C1, C3, C19, C21 |
| 4 | 470k | Resistor_SMD:R_0603_1608Metric | R1, R4, R38, R41 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 12k | Resistor_SMD:R_0603_1608Metric | R16, R17, R30 |
| 3 | 22uf | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R23, R24, R25 |
| 3 | BM04B-SRSS-TB(LF)(SN) | easyeda2kicad:CONN-SMD_BM04B-SRSS-TB | CN1, CN2, CN3 |
| 3 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1, TP2, TP3 |
| 2 | 1.8V | easyeda2kicad:SOD-123_L2.7-W1.6-LS3.7-RD | D1, D7 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 196k | Resistor_SMD:R_0603_1608Metric | R2, R39 |
| 2 | 2.7nf | Capacitor_SMD:C_0603_1608Metric | C2, C20 |
| 2 | 249k | Resistor_SMD:R_0603_1608Metric | R6, R43 |
| 2 | 2A | Fuse:Fuse_1206_3216Metric | F1, F2 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 2 | 4120 | Resistor_SMD:R_0603_1608Metric | R5, R42 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 54.9k | Resistor_SMD:R_0603_1608Metric | R3, R40 |
| 2 | B3U-1000P | easyeda2kicad:KEY-SMD_B3U-1000PM | SW1, SW2 |
| 2 | JP1 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP2 |
| 2 | LM73100RPWR | easyeda2kicad:VQFN-10_L2.0-W2.0-P0.45-TL | Protect1, Protect2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 1uH | Inductor_SMD:L_Coilcraft_XAL4020-XXX | L1 |
| 1 | 2061-602/998-404 | easyeda2kicad:CONN-SMD_2061-602-998-404 | U6 |
| 1 | 332k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 470pf | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 47uf | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 5.6k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 51k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 6.8uf | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | AMS1117-5.0_C347223 | easyeda2kicad:SOT-223_L6.7-W3.5-P2.30-BR | U8 |
| 1 | B3B-XH-A(LF)(SN) | easyeda2kicad:CONN-TH_3P-P2.50_A2501WV2-3P | U9 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | ESP-12F | RF_Module:ESP-12E | U4 |
| 1 | LM339 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | MICROXNJ | easyeda2kicad:MICRO-USB-SMD_MICROXNJ | USB1 |
| 1 | SPX3940AM3-L-3-3/TR | easyeda2kicad:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U7 |
| 1 | TPS63070RNMR | easyeda2kicad:VQFN-HR-15_L3.0-W2.5-P0.50-BL_TPS63070RNMR | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
More from marmbrus/circuits
12- 4 layers100 × 91.4 mm

- 4 layers138 × 125 mm

- 4 layers138 × 104 mm

- 4 layers68.8 × 135.2 mm

- 4 layers125.5 × 154.5 mm

- 4 layers295.1 × 12 mm

- 4 layers70 × 82 mm

- 4 layers94 × 74 mm

- 4 layers94 × 74 mm

- 4 layers121.5 × 154.3 mm

- 4 layers70 × 45 mm

- 4 layers63 × 63 mm

Similar boards
- 4 layers100 × 100 mm

- 4 layers64 × 56 mm

Esp32s3-devkit-5v
eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
124 parts - 4 layers101 × 51.5 mm

Quack core
HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.
138 parts1CERN-OHL-S-2.0 - 2 layers25.4 × 50.8 mm

- 2 layers61 × 40.6 mm

Vanity Mirror Project
HsuArcher/smart-vanity-mirror
Custom ESP8266 based smart vanity mirror with touch controls, USB-C power and programming integration, custom CADed frame and custom PCB.
41 parts1MIT - 2 layers51.5 × 76.5 mm

Esp rfm
Phunkafizer/RFM-gateway
Hard- and software for the RFM-gateway, a universal platform for integrating sub-GHz radio into your WiFi network
47 parts1MIT - 2 layers43.3 × 26.3 mm

- 6 layers91.6 × 50.6 mm

Smokebreak
offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.
208 partsCERN-OHL-S-2.0
Questions
How big is the Esp8266-flexpower PCB?
It measures 70 × 62 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Esp8266-flexpower use?
113 parts, built around the CH340C, ESP-12F, TPS63070RNMR and B3B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp8266-flexpower KiCad files?
From the marmbrus/circuits repository on GitHub, at the commit this page was made from: the board is esp8266-flexpower/esp8266-flexpower.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp8266-flexpower design in my own project?
Its repository states no licence, so its author keeps all rights: ask marmbrus before reusing the design.