Skip to the content
2 layers61 × 40.6 mmVanity Mirror Project, the printed circuit board in 3D

Vanity Mirror Project

HsuArcher/smart-vanity-mirror1

Custom ESP8266 based smart vanity mirror with touch controls, USB-C power and programming integration, custom CADed frame and custom PCB.

Size
61 × 40.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
49
Pads
156
Tracks, vias
383, 51
Pours
6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 Jan 2026
Updated
27 Apr 2026

Overview

Vanity Mirror Project is an open-source printed circuit board by HsuArcher, from the HsuArcher/smart-vanity-mirror repository on GitHub, published under the MIT licence. It is a 2-layer board of 61 × 40.6 mm with 41 parts on 49 nets, routed with 383 tracks and 51 vias.

It is built around the CH340C, ESP-12F and SN74LV1T34QDBVRQ1, with the FDC1004QDGSRQ1, XL1509-3.3 and USBLC6-2SC6 among its other parts. Its parts include 11 capacitors, 11 resistors, 6 ICs, 2 transistors and 1 diode. It belongs with the ESP8266 boards of this library.

Main components

6

README

Hardware/Electrical-Schematics/README.md

Schematics

KiCAD schematics files and PDFs

Parts

41
QtyValueFootprintReferences
50.1uFCapacitor_SMD:C_0603_1608MetricC1, C4, C6, C8, C9
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
310kResistor_SMD:R_0603_1608MetricR1, R4, R11
210uFCapacitor_SMD:C_0805_2012MetricC2, C7
212kResistor_SMD:R_0603_1608MetricR2, R3
21uFCapacitor_SMD:C_0603_1608MetricC11, C13
227Resistor_SMD:R_0603_1608MetricR7, R8
24.7kResistor_SMD:R_0603_1608MetricR9, R10
2470uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC10, C12
25.1kResistor_SMD:R_0603_1608MetricR5, R6
2Q_NPN_BECVanityMirror_FootPrints:PMEG2020EPASXQ1, Q2
11N5820Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1
122uHVanityMirror_FootPrints:INDPM110100X400NL2
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU1
1Conn_01x03_PinConnector_Wire:SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mmLED_Pins1
1Conn_01x04_PinConnector_Wire:SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mmTouch_Sensors1
1ESP-12FRF_Module:ESP-12EU2
1FDC1004QDGSRQ1VanityMirror_FootPrints:SOP50P490X110-10NIC2
1MF-MSMF300_6X-2VanityMirror_FootPrints:MFMSMF3006X2F2
1RSTButton_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243SW1
1SN74LV1T34QDBVRQ1VanityMirror_FootPrints:SOT95P280X145-5NIC1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_GCT_USB4085J1
1XL1509-3.3Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU4

More from HsuArcher/smart-vanity-mirror

1
  • 2 layers66.6 × 52.6 mmVanity Mirror Project V2, the printed circuit board in 3D

    Vanity Mirror Project V2

    HsuArcher/smart-vanity-mirror

    Custom ESP8266 based smart vanity mirror with touch controls, USB-C power and programming integration, custom CADed frame and custom PCB.

    40 parts1MIT

Similar boards

  • 2 layers51.5 × 76.5 mmEsp rfm, the printed circuit board in 3D

    Esp rfm

    Phunkafizer/RFM-gateway

    Hard- and software for the RFM-gateway, a universal platform for integrating sub-GHz radio into your WiFi network

    47 parts1MIT
  • 2 layers43.3 × 26.3 mmSample, the printed circuit board in 3D

    Sample

    pavankalyan226/Esp12E-F

    PCB

    30 parts
  • 4 layers121.5 × 154.3 mmBlocks, the printed circuit board in 3D

    Blocks

    marmbrus/circuits

    79 parts
  • 4 layers89 × 58 mmHALMET, the printed circuit board in 3D

    HALMET

    hatlabs/HALMET-hardware

    Hat Labs Marine Engine & Tank interface hardware design files

    227 parts8CC-BY-4.0
  • 4 layers89 × 58 mmSH ESP32, the printed circuit board in 3D

    SH ESP32

    kitspace-test-repos/kicad6-file-collection

    308 partsMIT
  • 4 layers50.9 × 46.7 mmHybridPanda, the printed circuit board in 3D

    HybridPanda

    kriptomad/openpilot-honda-city-brasil

    openpilot/flowpilot for the Honda City G7 2023 (Brazil): black panda firmware, openpilot v0.9.9 port, flowpilot APK, Hybrid Panda STM32H725 PCB. Release index repo.

    125 parts1
  • 2 layers49.3 × 19.7 mmFineMotion-5, the printed circuit board in 3D

    FineMotion-5

    Kamilake/FineMotion-Tracker

    ESP8266 Motion Capture Full-Body Tracker for SlimeVR

    43 parts16CERN-OHL-P-2.0

Questions

How big is the Vanity Mirror Project PCB?

It measures 61 × 40.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Vanity Mirror Project use?

41 parts, built around the CH340C, ESP-12F, SN74LV1T34QDBVRQ1 and FDC1004QDGSRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vanity Mirror Project KiCad files?

From the HsuArcher/smart-vanity-mirror repository on GitHub, at the commit this page was made from: the board is Hardware/Electrical-Schematics/Vanity_Mirror_Project.kicad_pcb and its schematic Hardware/Electrical-Schematics/Vanity_Mirror_Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vanity Mirror Project design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).