Skip to the content
2 layers79.5 × 46.5 mmIntro to PCB, the printed circuit board in 3D
Size
79.5 × 46.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
62
Pads
200
Tracks, vias
414, 69
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Feb 2025
Updated
9 Mar 2025

Parts

46
QtyValueFootprintReferences
7.1uCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C8, C12, C13
2.1uCapacitor_SMD:CP_Elec_6.3x7.7C11, C15
2150Resistor_SMD:R_0402_1005MetricR11, R12
218pCapacitor_SMD:C_0402_1005MetricC5, C6
24.7kResistor_SMD:R_0402_1005MetricR2, R4
24.7uCapacitor_SMD:CP_Elec_6.3x7.7C9, C14
25.1kResistor_SMD:R_0402_1005MetricR5, R6
2Conn_01x16_FemaleConnector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ2, J3
2ESD9B5.0ST5GDiode_SMD:D_SOD-923D1, D2
2LEDLED_SMD:LED_0402_1005MetricD3, D4
10.1uCapacitor_SMD:C_0603_1608MetricC7
110kResistor_SMD:R_0402_1005MetricR1
110uInductor_SMD:L_0603_1608MetricL1
110uCapacitor_SMD:CP_Elec_6.3x7.7C10
1120ohmsInductor_SMD:L_0603_1608MetricFB1
1121Resistor_SMD:R_0402_1005MetricR7
1155Resistor_SMD:R_0402_1005MetricR9
116MHzCrystal:Crystal_SMD_2012-2Pin_2.0x1.2mmY1
11MResistor_SMD:R_0402_1005MetricR3
1200Resistor_SMD:R_0402_1005MetricR8
1500mAFuse:Fuse_1812_4532MetricF1
170Resistor_SMD:R_0402_1005MetricR10
1ATmega328P-APackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1FT232RLPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU3
1ICSPConnector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ4
1LM1117DT-ADJPackage_TO_SOT_SMD:SOT-223U2
1LOGOMALTS - ADXL:socetlogoG***
1RX_LEDLED_SMD:LED_0402_1005MetricD6
1SW_PushButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1
1TX_LEDLED_SMD:LED_0402_1005MetricD5
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_Palconn_UTC16-GJ1

Similar boards

  • 2 layers69 × 37.9 mmIntro to PCB, the printed circuit board in 3D

    Intro to PCB

    JBrannon48/ATmega328P_DevBoard

    45 parts
  • 2 layers77 × 42.5 mmIntro to PCB, the printed circuit board in 3D

    Intro to PCB

    Seokjae-Kim/Intro-to-PCB

    Intro to PCB schematics

    45 parts
  • 2 layers77.5 × 41.5 mmIntro to PCB, the printed circuit board in 3D

    Intro to PCB

    jtausif568/ATmega328P-Development-Board

    An ATmega328P-based development board (Arduino-compatible) designed from scratch in KiCad

    45 parts
  • 2 layers79 × 50.5 mmIntro to PCB, the printed circuit board in 3D

    Intro to PCB

    Rubeez1/Intro_PCB

    45 parts
  • 2 layers118 × 70 mmPhotogateV2, the printed circuit board in 3D

    PhotogateV2

    MarcioBulla/PhotogateV2

    Second Version of Photogate

    66 parts1
  • 2 layers57.1 × 59.6 mmWalkieTalkie, the printed circuit board in 3D

    WalkieTalkie

    zmuhammad07/Walky_Talky

    Walky-Talky — LoRa voice communication system built on STM32 with a custom KiCad PCB. Features I2S digital mic input (INMP441), Codec2 voice compression (96kbps → 1.2kbps), RYLR998 LoRa RF at 915MHz, 12-bit DAC audio…

    49 parts1MIT
  • 2 layers145 × 60 mmBT BAT CNTLR, the printed circuit board in 3D

    BT BAT CNTLR

    NateJ892/bluetooth-battery-system

    TODO: - Upsize regulator - Add USB protection IC - Increase Connector Current to 1.5A each for "Fast Charging"

    89 parts
  • 2 layers88.3 × 97.8 mmStarter, the printed circuit board in 3D

    Starter

    L0czek/rakieta

    The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.

    45 parts

Questions

How big is the Intro to PCB PCB?

It measures 79.5 × 46.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Intro to PCB use?

46 parts, built around the ATMEGA328P-AU, FT232RL, LM1117DT-ADJ and ESD9B5.0ST5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Intro to PCB KiCad files?

From the maribelvasquez/IntrotoSOCET_pcb repository on GitHub, at the commit this page was made from: the board is intro_to_PCB.kicad_pcb and its schematic intro_to_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Intro to PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask maribelvasquez before reusing the design.