Skip to the content
PCBKitNew board
LM1117DT-ADJ, in 3D

LM1117DT-ADJ

Texas Instruments

0℃~+125℃@(Tj) 1 1.25V~13.8V 1.2V@(800mA) 15V 5mA 75dB@(120Hz) 800mA Adjustable Over Current Protection、Over Temperature Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Extended
DatasheetJLCPCBLCSCti/LM1117DT-ADJ
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
TO-252
Pins
3

Overview

The LM1117DT-ADJ is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a TO-252 package with 3 pins. 0℃~+125℃@(Tj) 1 1.25V~13.8V 1.2V@(800mA) 15V 5mA 75dB@(120Hz) 800mA Adjustable Over Current Protection、Over Temperature Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LM1117DT-ADJ, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-252-3_TabPin2, from KiCad's library), ready for a KiCad board. 51 are in stock at JLCPCB (part C2863814). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

ADJ1VO2VI3
Regulator_Linear:LM1117DT-ADJFrom KiCad's library

Footprint

1223
Package_TO_SOT_SMD:TO-252-3_TabPin2From KiCad's library

Parameters

15
Dropout Voltage
1.3V@(800mA)
Feature
Overcurrent Protection；Overheat protection
Features
Thermal shutdown
Maximum Input Voltage
15V
Number of Outputs
1
Operating Temperature
0℃~+125℃@(Tj)
Output Configuration
Positive
Output Current
800mA
Output Polarity
Positive electrode
Output Type
Adjustable
Output Voltage
1.25V~13.8V
Power Supply Rejection Ratio (PSRR)
75dB@(120Hz)
Voltage - Supply
15V
Voltage Dropout
1.2V@(800mA)
standby current
5mA

Order codes

2

Pinout

3
The pins of the LM1117DT-ADJ
PinNameType
1ADJInput
2VOPower out
3VIPower in

Open-source boards using it

All 7
  • 2 layers118 × 70 mmPhotogateV2, the printed circuit board in 3D

    PhotogateV2

    MarcioBulla/PhotogateV2

    Second Version of Photogate

    66 parts1
  • 2 layers57.1 × 59.6 mmWalkieTalkie, the printed circuit board in 3D

    WalkieTalkie

    zmuhammad07/Walky_Talky

    Walky-Talky — LoRa voice communication system built on STM32 with a custom KiCad PCB. Features I2S digital mic input (INMP441), Codec2 voice compression (96kbps → 1.2kbps), RYLR998 LoRa RF at 915MHz, 12-bit DAC audio…

    49 parts1MIT
  • 2 layers69 × 37.9 mmIntro to PCB, the printed circuit board in 3D

    Intro to PCB

    JBrannon48/ATmega328P_DevBoard

    45 parts
  • 2 layers79.5 × 46.5 mmIntro to PCB, the printed circuit board in 3D

    Intro to PCB

    maribelvasquez/IntrotoSOCET_pcb

    46 parts
  • 2 layers145 × 60 mmBT BAT CNTLR, the printed circuit board in 3D

    BT BAT CNTLR

    NateJ892/bluetooth-battery-system

    TODO: - Upsize regulator - Add USB protection IC - Increase Connector Current to 1.5A each for "Fast Charging"

    89 parts
  • 2 layers77 × 42.5 mmIntro to PCB, the printed circuit board in 3D

    Intro to PCB

    Seokjae-Kim/Intro-to-PCB

    Intro to PCB schematics

    45 parts
  • 2 layers88.3 × 97.8 mmStarter, the printed circuit board in 3D

    Starter

    L0czek/rakieta

    The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.

    45 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/LM1117DT-ADJ" title="LM1117DT-ADJ in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/LM1117DT-ADJ.jpg" alt="LM1117DT-ADJ" width="1200" height="900">
A picture that opens the part, for a README
[![LM1117DT-ADJ](https://pcbkit.io/embed/parts/ti/LM1117DT-ADJ.jpg?size=s)](https://pcbkit.io/parts/ti/LM1117DT-ADJ)

Questions

Is there a KiCad symbol and footprint for the LM1117DT-ADJ?

Yes. The symbol is Regulator_Linear:LM1117DT-ADJ and the footprint Package_TO_SOT_SMD:TO-252-3_TabPin2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM1117DT-ADJ?

TO-252, with 3 pins. Its footprint is drawn on this page.

Where is the LM1117DT-ADJ datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM1117DT-ADJ?

JLCPCB lists it as part C2863814, with 51 in stock; the sellers' links on this page open their listings.

What can replace the LM1117DT-ADJ?

Parts like it in the library: the AMS1117CD-3.3 by Advanced Monolithic Systems, the LD39150DT33-R by STMicroelectronics, the LM1117IDTX-5.0 by Texas Instruments and the AMS1117CD-5.0 by Advanced Monolithic Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM1117DT-ADJ?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8