Boards by manhoosbilli1

17 boards

Open-source boards designed in KiCad by manhoosbilli1 on GitHub, from 13 repositories. A board’s address here is its repository’s there.

6 layers75 × 21.4 mm
Smartcube revA
manhoosbilli1/smart-cube-multi-pcb-flex-assembly
Smart Cube - multi-PCB flex assembly (PCBA, PCBB, PCBC + FLEX + tabs Y/G/B)
39 parts1
2 layers100 × 60 mm
Alarming AC Enclosure
manhoosbilli1/atmega328-enclosure-tamper-alarm
ATmega328 AC enclosure tamper/intrusion alarm with LTC2960 voltage monitor, LTC4412 PowerPath, boost+buck converters
98 parts
4 layers48.3 × 52.9 mm
DynaButton
manhoosbilli1/dynaboard-button-controller
Dynaboard - large button/control interface board (102 syms, 590 tracks)
68 parts
4 layers23.3 × 28.4 mm
Daronjli dongle
manhoosbilli1/esp32-bluetooth-erm-accel-dongle-faulty
ESP32 Bluetooth dongle with ERM haptic motor and accelerometer - FAULTY: wrong ORing circuit, used NMOS instead of PMOS
56 parts
4 layers109.5 × 61.1 mm
Daanmem esp32 board FO2DABBFD842
manhoosbilli1/ESP32-controlled-peltier-controller-CE-pre-certified-untested
Contains files for esp32 peltier controller with fans, thermistors, and various other outputs. this is the version 2 focusing on emc and CE certification. yet to be tested in a lab
191 parts
4 layers11 × 50.8 mm
Daronjli necklace
manhoosbilli1/esp32-dongle-v0-1-ceramic-antenna
Smallest possible ESP32 dongle v0.1 with ceramic antenna - untested (never manufactured)
61 parts
2 layers47.2 × 45.8 mm
Heater controller rev a
manhoosbilli1/heater-controller-rev-a
Rev A of hierarchical heater controller (multi-sheet)
75 parts
2 layers83.7 × 90.3 mm
Incubator Quetta Client
manhoosbilli1/Incubator_basic_esp32_modular_1_sided
This contains an incubator pcb i've made for a client. his needs were specific so only added what he needed. a complete and complex version can be found in capibator organization.
43 parts
2 layers103 × 74.2 mm
LED CONTROLLER POT FO41B007FF584
manhoosbilli1/led-dimmer-pot-controller
Potentiometer-controlled LED dimmer board
42 parts
2 layers100 × 100 mm
PCB trainer
manhoosbilli1/PCB_trainer
Contains various chip sizes and form factors to practice soldering on.
54 parts
2 layers66.4 × 64.4 mm
RPI PICO CARRIER
manhoosbilli1/qx-rp2040-carrier
RP2040 Pico carrier with breakouts and onboard power (Capistor QX line)
46 parts
2 layers94 × 48.1 mm
Daanmem esp32 board FO2DABBFD842
manhoosbilli1/smart-peltier-driver-esp32-v1
Smart Peltier driver, ESP32 (v1 - v2 in active development)
89 parts
2 layers25.4 × 86 mm
Audio jon FO1146A9E2145
manhoosbilli1/tpa6110-stereo-amp-input-router
Stereo audio amplifier (TPA6110A2) with 74AHC1G66 analog input switching and op-amp signal conditioning
52 parts
6 layers
Smartcube revA CLEAN PCB B
manhoosbilli1/smart-cube-multi-pcb-flex-assembly
Smart Cube - multi-PCB flex assembly (PCBA, PCBB, PCBC + FLEX + tabs Y/G/B)
4 parts1
6 layers16.6 × 20.8 mm
Smartcube revA Flex
manhoosbilli1/smart-cube-multi-pcb-flex-assembly
Smart Cube - multi-PCB flex assembly (PCBA, PCBB, PCBC + FLEX + tabs Y/G/B)
4 parts1
6 layers17.1 × 17.1 mm
Smartcube revA PCB A
manhoosbilli1/smart-cube-multi-pcb-flex-assembly
Smart Cube - multi-PCB flex assembly (PCBA, PCBB, PCBC + FLEX + tabs Y/G/B)
31 parts1
2 layers17.1 × 17.1 mm
Smartcube revA PCB B
manhoosbilli1/smart-cube-multi-pcb-flex-assembly
Smart Cube - multi-PCB flex assembly (PCBA, PCBB, PCBC + FLEX + tabs Y/G/B)
4 parts1