

E-Formula 전기시스템 회로도 및 PCB 설계도, 배선도
- Size
- 293.1 × 125.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 159
- Nets
- 223
- Pads
- 739
- Tracks, vias
- 2,797, 204
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Feb 2023
- Updated
- 14 Aug 2023
Overview
LV PCB is an open-source printed circuit board by luftaquila, from the luftaquila/a-fa-schematics repository on GitHub. It is a 2-layer board of 293.1 × 125.3 mm with 159 parts on 223 nets, routed with 2,797 tracks and 204 vias.
It is built around the DFR0299, ESP32-WROOM-32D and LM311, with the ADXL345-EP, AMS1117-3.3 and NE555D among its other parts. Its parts include 64 resistors, 19 ICs, 17 diodes, 16 connectors and 14 transistors. It belongs with the ESP32 and STM32 boards of this library.
Main components
8DFR0299
THroughholeTHroughhole V-Audio Modules ROHSDFRobotV-Audio ModulesESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesLM311
SOP-80℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHSGcoreComparatorsADXL345-EP
LGA-14(3x5x0.8)LGA-14(3x5x0.8) New Arrivals ROHSAnalog DevicesUncategorisedAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsNE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersIRF640
TO-220-3L-55℃~+150℃ 1 N-channel 1.3nF 120pF 180mΩ@10V 18A 200V 2W 400pF 4V N-Channel TO-220-3L MOSFETs ROHSGOODWORKMOSFETsIRF9540NS
TO-263MOSFETsMinos
README
README.mdE-Formula 전기시스템 파트 회로도 / PCB / 배선
상위 프로젝트: luftaquila/a-fa-landing
-
회로도
- EV.kicad_pro
- KiCAD 6.0 프로젝트
- 메인 회로도입니다. 추상적으로 차량의 모든 고전압/저전압 전기 계통이 표현되어 있습니다. 메인 회로도 하위의 계층 회로도는 개별 구성 요소를 추상화합니다. 계층 회로도 중
/PCB폴더 하위의 파일들은 실제 PCB의 회로도입니다.
- EV.kicad_pro
-
PCB
- /PCB/*.kicad_pcb
- KiCAD 6.0 PCB 아트워크
- 각 PCB 폴더는 하나의 독립적인 KiCAD 프로젝트입니다. 메인 회로도인
EV.kicad_sch파일이 계층 회로 구성을 통해 각 PCB 폴더의*.kicad_sch파일을 가리키는 방식으로 서로 연결되어 있습니다.
- /PCB/*.kicad_pcb
-
배선
- wirings
- 차량의 모든 외부 배선을 표현하는 WireViz 배선 체계도입니다.

- wirings
Parts
159| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R12, R15, R26, R27, R28, R29, R30, R31, R32, R38, R45, R47, R51, R64 |
| 10 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R25, R33, R41, R42, R49, R59, R60, R61, R62, R63 |
| 10 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R14, R16, R19, R34, R35, R36, R37, R48, R55 |
| 9 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q5, Q6, Q8, Q9, Q10, Q11, Q12, Q13, Q14 |
| 6 | 2.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R52, R53, R54, R56, R57, R58 |
| 6 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R5, R6, R7, R8, R24 |
| 6 | LM311 | footprint:LM311P | U2, U3, U16, U17, U18, U19 |
| 5 | 3.3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R39, R40, R43, R44, R46 |
| 5 | 5267-12AX | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2, J4, J10, J12 |
| 5 | HR702NH-DC12V | footprint:HR702 | K1, K2, K3, K4, K5 |
| 4 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C7, C8, C9, C10 |
| 4 | 1nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4 |
| 4 | IRF640 | footprint:IRF640NPBF | Q1, Q2, Q4, Q7 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R20, R21 |
| 3 | Conn_01x02_Female | footprint:5566-02A | J8, J11, J13 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C6 |
| 2 | 4M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22, R23 |
| 2 | Conn_01x01_Female | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J15, J16 |
| 2 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J14 |
| 2 | LM555xN | footprint:NE555P | U13, U14 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | 10uF1 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 1 | 240K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 3.3V Converter | footprint:DCDC_MODULE | U6 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R50 |
| 1 | 51k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 1 | 5267-08AX | footprint:5566-08 | J3 |
| 1 | 5267-10AX | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | 5V Converter | footprint:DCDC_MODULE | U5 |
| 1 | 8A | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | ADXL345 | footprint:ADXL345 | U9 |
| 1 | AMS1117-3.3 | footprint:AMS1117-5.0 | U4 |
| 1 | BSPD_GATE | LED_THT:LED_D5.0mm | D9 |
| 1 | CAN_TRANSCEIVER | footprint:CAN_TRANSIVER | U7 |
| 1 | CAN_{BMS | footprint:TOGGLE_SWITCH | SW3 |
| 1 | CAN_{DEBUG | footprint:TOGGLE_SWITCH | SW1 |
| 1 | CAN_{ECU | footprint:TOGGLE_SWITCH | SW2 |
| 1 | CAN_{INV | footprint:TOGGLE_SWITCH | SW4 |
| 1 | CAN_{LOGGER | footprint:TOGGLE_SWITCH | SW5 |
| 1 | Conn_01x04_Female | footprint:5566-04 | J6 |
| 1 | Conn_01x14_Female | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J5 |
| 1 | D302 | footprint:SPK_D302 | U8 |
| 1 | DFR0299 | footprint:DFR0299 | U12 |
| 1 | ERR_{CAN | LED_THT:LED_D5.0mm | D12 |
| 1 | ERR_{SYS | LED_THT:LED_D5.0mm | D11 |
| 1 | ESP32-WROOM-32D | footprint:MODULE_ESP32-WROOM-32D | U11 |
| 1 | ESP_{PROGRAM | footprint:TACT_SWITCH | SW8 |
| 1 | FAULT_{BMS | LED_THT:LED_D5.0mm | D2 |
| 1 | FAULT_{BSPD | LED_THT:LED_D5.0mm | D7 |
| 1 | FAULT_{IMD | LED_THT:LED_D5.0mm | D5 |
| 1 | HR90L2_12V | footprint:HR90L2 | K6 |
| 1 | IRF9540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
| 1 | NE555D | footprint:NE555P | U1 |
| 1 | NEO-7M | footprint:GPSV3-NE0 | U10 |
| 1 | OK_{AUX | LED_THT:LED_D5.0mm | D3 |
| 1 | OK_{BMS | LED_THT:LED_D5.0mm | D4 |
| 1 | OK_{BSPD | LED_THT:LED_D5.0mm | D8 |
| 1 | OK_{HV | LED_THT:LED_D5.0mm | D10 |
| 1 | OK_{IMD | LED_THT:LED_D5.0mm | D6 |
| 1 | OK_{LV | LED_THT:LED_D5.0mm | D1 |
| 1 | RLY_{BMS | footprint:RT424F12 | RLY1 |
| 1 | RLY_{BSPD | footprint:RT424F12 | RLY3 |
| 1 | RLY_{IMD | footprint:RT424F12 | RLY2 |
| 1 | RTD | LED_THT:LED_D5.0mm | D17 |
| 1 | STM32F407VETx | footprint:STM32F407_HOLDER | U15 |
| 1 | TUNE_{BRAKE | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | TUNE_{HALL | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | _{CAN | LED_THT:LED_D5.0mm | D15 |
| 1 | _{ESP | LED_THT:LED_D5.0mm | D16 |
| 1 | _{HEARTBEAT | LED_THT:LED_D5.0mm | D13 |
| 1 | _{SD | LED_THT:LED_D5.0mm | D14 |
More from luftaquila/a-fa-schematics
12- 2 layers293.1 × 123.3 mm

- 2 layers121.7 × 26.9 mm

- 2 layers148.7 × 100 mm

- 2 layers184.3 × 40 mm

- 2 layers225.1 × 97 mm

- 2 layers115 × 100 mm

- 2 layers121.8 × 61 mm

- 2 layers111.2 × 82.1 mm

- 2 layers225.1 × 97 mm

- 2 layers135.6 × 90.4 mm

- 2 layers53.3 × 57.1 mm

- 2 layers99.1 × 80 mm

Similar boards
- 2 layers

Tiltetcher
hitimr/Tiltetcher
Project for builind a swinging etching tank with automated temperature regulation
17 parts - 2 layers

- 2 layers80 × 80 mm

- 2 layers97.5 × 97.5 mm

Ud27c
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
106 parts59 - 2 layers71.6 × 42.7 mm

TSAL
danielortval/RamRacing-EV-PCBs
Full schematic and PCB designs for RAM Racing’s Formula SAE Electric Vehicle. Includes tractive system active light, hard fault latch, precharge/discharge circuits, and the complete EV schematic.
48 parts2 - 4 layers59.5 × 72 mm

EasyFlyback2
domergan/flyback2_recreation
A recreation of the Easy-Flyback driver by Franzoli Electronics: a resonant driver for CRT TV flyback transformers that produces high-voltage arcs, which can be audio-modulated to play music.
47 parts - 2 layers86.1 × 66.4 mm

StereoPlasmaSpeakersV2
Firestorm108/Plasma-Speakers-V2
Dual flyback transformers that produce audio through the modulation of high frequency plasma arcs.
72 parts - 2 layers58 × 38 mm

Questions
How big is the LV PCB PCB?
It measures 293.1 × 125.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LV PCB use?
159 parts, built around the DFR0299, ESP32-WROOM-32D, LM311 and ADXL345-EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LV PCB KiCad files?
From the luftaquila/a-fa-schematics repository on GitHub, at the commit this page was made from: the board is PCBs/LV_PCB v2/LV_PCB.kicad_pcb and its schematic 2021-2022/PCB/BATTERY_PACK_PCB/TSAL&DIS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LV PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask luftaquila before reusing the design.