Skip to the content
2 layersTiltetcher, the printed circuit board in 3D

Project for builind a swinging etching tank with automated temperature regulation

Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
39
Pads
66
Tracks, vias
6, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
8 Jul 2022
Updated
11 Sep 2022

Overview

Tiltetcher is an open-source printed circuit board by hitimr, from the hitimr/Tiltetcher repository on GitHub. It is a 2-layer board with 17 parts on 39 nets, routed with 6 tracks and 0 vias.

It is built around the ARDUINO UNO R3, IRF3205 and IRF640. Its parts include 9 resistors, 3 connectors, 2 transistors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

Tiltetcher

Project for builind a swinging etching tank with automated temperature regulation

Parts

17
QtyValueFootprintReferences
41kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R2, R3, R3
3R220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5, R6, R7
23kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R1
112V_TerminalTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ2
11N4001Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
1Arduino_UNO_R3Module:Arduino_UNO_R3A1
1IRF3205Package_TO_SOT_THT:TO-220-3_VerticalQ1
1IRF640Package_TO_SOT_THT:TO-220-3_VerticalQ1
1KTY10Package_TO_SOT_THT:SOD-70_P2.54mmTH1
1Peltier_TerminalTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1
1Sensor_TerminalTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ3

Similar boards

  • 2 layers293.1 × 125.3 mmLV PCB, the printed circuit board in 3D

    LV PCB

    luftaquila/a-fa-schematics

    E-Formula 전기시스템 회로도 및 PCB 설계도, 배선도

    159 parts1
  • 2 layersMaglev hardware, the printed circuit board in 3D

    Maglev hardware

    ussserrr/maglev-hardware

    Schematic and PCB for maglev projects

    17 parts
  • 2 layers77.7 × 73.2 mmBMT BionX Minimum Translator vereinfacht, the printed circuit board in 3D

    BMT BionX Minimum Translator vereinfacht

    stancecoke/BionX_Minimal_Translator

    Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components

    40 parts22GPL-3.0
  • 2 layers50.2 × 73 mmLibreductioner, the printed circuit board in 3D

    Libreductioner

    andreasb242/Libreductioner

    Induction loop sender for mower

    39 parts8GPL-2.0
  • 2 layers98.8 × 55.1 mmH bridge controller, the printed circuit board in 3D

    H bridge controller

    jayanta525/dual-h-bridge

    Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

    104 parts5MIT
  • 2 layers90 × 44 mmDC AC Inverter EGS, the printed circuit board in 3D

    DC AC Inverter EGS

    stefaweb/DC-AC-Inverter-EGS

    Mini DC-AC Inverter with EGS002 module

    42 parts5
  • 2 layers80 × 100 mmCustomPCB, the printed circuit board in 3D

    CustomPCB

    Cpp-homies/MAPLE

    M.A.P.L.E: Modular Automated Plant Life Enclosure

    23 parts4MIT
  • 4 layers104.1 × 132.6 mmAmpeater, the printed circuit board in 3D

    Ampeater

    Acliad/Ampeater

    10 A/us high current electronic load for power supply testing

    97 parts3MIT

Questions

What parts does the Tiltetcher use?

17 parts, built around the ARDUINO UNO R3, IRF3205 and IRF640. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tiltetcher KiCad files?

From the hitimr/Tiltetcher repository on GitHub, at the commit this page was made from: the board is pcb/tiltetcher/tiltetcher.kicad_pcb and its schematic pcb/tiltetcher/tiltetcher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tiltetcher design in my own project?

Its repository states no licence, so its author keeps all rights: ask hitimr before reusing the design.