
ADXL345-EP
Analog DevicesExtended
LGA-14(3x5x0.8) New Arrivals ROHS
- Part id
- adi/ADXL345-EP
- Category
- Uncategorised
- Package
- LGA-14(3x5x0.8)
- Pins
- 14
- In stock
- 0 at JLCPCB (C782975)
- Used on
- 64 open-source boards
Overview
The ADXL345-EP is an uncategorised made by Analog Devices in a LGA-14(3x5x0.8) package with 14 pins. LGA-14(3x5x0.8) New Arrivals ROHS.
PCBKit's library has its KiCad symbol (agg-kicad:ADXL345, from Agg-kicad) and its footprint (SparkFun-Sensors:LGA-14, from Eagle libraries), ready for a KiCad board. JLCPCB lists it (part C782975). 64 open-source boards in 54 repositories on GitHub use it.
Symbol
Footprint
Pinout
14| Pin | Name | Type |
|---|---|---|
| 1 | VDD_IO | Power in |
| 2 | GND | Power in |
| 3 | NC | Not connected |
| 4 | GND | Power in |
| 5 | GND | Power in |
| 6 | Vs | Power in |
| 7 | CS | Input |
| 8 | INT1 | Output |
| 9 | INT2 | Output |
| 10 | NC | Not connected |
| 11 | NC | Not connected |
| 12 | SDO | Output |
| 13 | SDI | Input |
| 14 | SCLK | Input |
- 4 layers42 × 42 mm

- 2 layers97 × 77.5 mm

ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers65 × 56 mm

- 2 layers61.3 × 89.6 mm

QuakeGuard PCB
GiZano/QuakeGuard
Distributed Earthquake Early Warning (EEW) system built on low-cost ESP32-C3 IoT sensors with Zero-Trust security, multi-node epicenter triangulation, and on-premise AI emergency reports.
17 parts24AGPL-3.0 - 6 layers60 × 60 mm

High Temp Load Cell Toolhead Board
garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220
125 parts23GPL-3.0 - 2 layers184.2 × 71.2 mm

- 2 layers112 × 62 mm

- 2 layers89.5 × 48 mm

Avionics
cuspaceflight/avionics14
Designed to be compiled with the GNU ARM Toolchain - https://launchpad.net/gcc-arm-embedded
115 parts4
Questions
Is there a KiCad symbol and footprint for the ADXL345-EP?
Yes. The symbol is agg-kicad:ADXL345 and the footprint SparkFun-Sensors:LGA-14, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADXL345-EP?
LGA-14(3x5x0.8), with 14 pins. Its footprint is drawn on this page.
Where can I order the ADXL345-EP?
JLCPCB lists it as part C782975, with 0 in stock; the sellers' links on this page open their listings.
Which open-source boards use the ADXL345-EP?
64 boards in 54 repositories on GitHub; the most starred are listed on this page, with their KiCad files.