
StereoPlasmaSpeakersV2
Firestorm108/Plasma-Speakers-V2
Dual flyback transformers that produce audio through the modulation of high frequency plasma arcs.

A recreation of the Easy-Flyback driver by Franzoli Electronics: a resonant driver for CRT TV flyback transformers that produces high-voltage arcs, which can be audio-modulated to play music.
EasyFlyback2 is an open-source printed circuit board by domergan, from the domergan/flyback2_recreation repository on GitHub. It is a 4-layer board of 59.5 × 72 mm with 47 parts on 19 nets, routed with 127 tracks and 0 vias.
It is built around the LM311, NE555D and 1N4148W, with the BC327 among its other parts. Its parts include 15 capacitors, 15 resistors, 4 diodes, 3 connectors and 2 ICs.
A recreation of the Easy-Flyback driver by Franzoli Electronics: a resonant driver for CRT TV flyback transformers that produces high-voltage arcs, which can be audio-modulated to play music. This repository contains a redrawn schematic and PCB layout based on his schematic published publicly on his page (https://franzolielectronics.com/easy-flyback-i/).
All credit for the original circuit design goes to Franzoli!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C9, C10, C11, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopOnly | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_THT:C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3 | C13, C14, C15 |
| 3 | 10n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C4, C7 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R9, R12 |
| 2 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R8 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R5 |
| 2 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R14 |
| 2 | LED | LED_THT:LED_D5.0mm | D2, D3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J2, J3 |
| 1 | 100n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C5 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D4 |
| 1 | 1N4742 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | 1u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 270R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 330R | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R1 |
| 1 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 4n7 | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | AudioJack2 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J4 |
| 1 | BC327 | Package_TO_SOT_THT:TO-92_Inline | Q3 |
| 1 | LM311 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | NE555D | Package_DIP:DIP-8_W7.62mm_Socket | U2 |
| 1 | NMOS | Package_TO_SOT_THT:TO-247-3_Horizontal_TabDown | Q2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |

Firestorm108/Plasma-Speakers-V2
Dual flyback transformers that produce audio through the modulation of high frequency plasma arcs.

phastmike/neutec-repeater-hardware
Contains KiCad files for the Neutec Repeater Project. Firmware is on a different repository

danielortval/RamRacing-EV-PCBs
Full schematic and PCB designs for RAM Racing’s Formula SAE Electric Vehicle. Includes tractive system active light, hard fault latch, precharge/discharge circuits, and the complete EV schematic.





It measures 59.5 × 72 mm and has 4 copper layers, 1.6 mm thick.
47 parts, built around the LM311, NE555D, 1N4148W and BC327. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the domergan/flyback2_recreation repository on GitHub, at the commit this page was made from: the board is kicad/EasyFlyback2.kicad_pcb and its schematic kicad/EasyFlyback2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask domergan before reusing the design.