
Comp Board
badaboombox/SS-Handheld-Console
An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.

KK power module is an open-source printed circuit board by lionsarmor, from the lionsarmor/KeychainKreatures_PCB repository on GitHub. It is a 2-layer board of 30 × 40 mm with 32 parts on 32 nets, routed with 298 tracks and 40 vias.
It is built around the MCP73871EV, DW01A and FS8205, with the SMAJ5.0A among its other parts. Its parts include 12 resistors, 5 connectors, 4 capacitors, 4 diodes and 2 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 470 Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9, R11 |
| 3 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED1, LED2, LED3 |
| 2 | 4.7 µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 0.1 µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 1 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 10 µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 10kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 110 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 3.3 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 330 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 47 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 5.1 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | BAT_TEMP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | FS8205 | FS8205:SOT95P280X145-6N | Q1 |
| 1 | JST-PH-2 BATTERY | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | NO_NTC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | R5.1 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | SMAJ5.0A | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | STATUS | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | SYS OUT | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | USB-C Power Input | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |

badaboombox/SS-Handheld-Console
An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.

Badbird5907/thermal-camera
My design of a cheap and affordable thermal camera


weteor/LuttUnLutt
Lütt Un Lütt is a small 3x5+2 split ortho keyboard with encoder


MangoIV/le_chiff_ble
A drop-in replacement-PCB for the beautiful le_chiffre

KaliAssistant/Fox-Jack
Portable social-engineering LAN tool for automated payloads and wired audits — based on Luckfox Pico Max

It measures 30 × 40 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the MCP73871EV, DW01A, FS8205 and SMAJ5.0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lionsarmor/KeychainKreatures_PCB repository on GitHub, at the commit this page was made from: the board is PCB/KK_power_module/KK_power_module.kicad_pcb and its schematic PCB/Docs/KK_power_module/KK_power_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lionsarmor before reusing the design.