6 layers70 × 71.1 mm
6 layers7.2 × 3.3 mm
Fpga notab
linuxboot/flashkeeper6Documentation | Source | Join us on Matrix!
- Size
- 7.2 × 3.3 mm
- Copper layers
- 6
- Thickness
- 0.8 mm
- Parts
- 36
- Nets
- 28
- Pads
- 112
- Tracks, vias
- 240, 46
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Oct 2024
- Updated
- 8 Oct 2026
Overview
Fpga notab is an open-source printed circuit board by linuxboot, from the linuxboot/flashkeeper repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 7.2 × 3.3 mm with 36 parts on 28 nets, routed with 240 tracks and 46 vias.
It is built around the ICE40UP5K-UWG30ITR, AT25DF041B-UUN-T and TPS7A2012PDQNR-TP. Its parts include 4 capacitors, 4 ICs and 2 resistors. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
3
ICE40UP5K-UWG30ITR
WLCSP-30(2.1x2.5)-40℃~+100℃ 1171456bit 5280 660 WLCSP-30(2.1x2.5) Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)
AT25DF041B-UUN-T
WLCSP-8(1.6x1.6)1.25ms 1.65V~3.6V 100,000 cycles 104MHz 20 Years 25uA 35ms@(4KB) 4Mbit SPI WLCSP-8(1.6x1.6) NOR FLASH ROHSRenesas ElectronicsNOR FLASH
TPS7A2012PDQNR-TP
DFN-4(1x1)DFN-4(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICUncategorised
README
README.mdFlashkeeper
Manage and Protect your SPI Flash Chip!
Documentation | Source | Join us on Matrix!
Flashkeeper is a family of open-hardware add-ons for standard SOIC-8 and WSON-8 SPI NOR flash chips (as are commonly used for firmware storage in PCs and other electronics), providing functionality for write-protection control, SPI bus breakout, flash device emulation, reprogramming, and state validation.
Flashkeeper development takes place on the 15h.org Git forge, and is mirrored to Github as a backup. If you wish to participate in Flashkeeper development on 15h.org infrastructure, please request an account in either the Flashkeeper room or the 15h.org room on Matrix. Issues may be opened on either 15h.org or Github.
For user information, please see the documentation. For hardware source files, see hw/.
The Flashkeeper project is supported by NLnet NGI Zero Core.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | ~ | flashkeeper:FPGACenterPad | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP23, TP24 +9 |
| 4 | 4.7 uF | flashkeeper:C_Smaller_0201 | C1, C2, C3, C4 |
| 1 | 100 | flashkeeper:R_Smaller_0201 | R3 |
| 1 | 10k | flashkeeper:YC102 | RN1 |
| 1 | 10k | flashkeeper:R_Smaller_0201 | R1 |
| 1 | AT25DF041B-UUN-T | Package_CSP:WLCSP-8_1.58x1.63x0.35mm_Layout3x5_P0.35x0.4mm_Ball0.25mm_Pad0.25mm_NSMD | U3 |
| 1 | ICE40UP5K-UWG30ITR | ICE40UP5K-UWG30ITR:BGA30N40P5X6_253X211X60N | U1 |
| 1 | RV-3028-C8 | flashkeeper:RV-3028-C8 | U4 |
| 1 | TPS7A2012PDQNR | Package_SON:Texas_X2SON-4_1x1mm_P0.65mm | U2 |
Questions
How big is the Fpga notab PCB?
It measures 7.2 × 3.3 mm and has 6 copper layers, 0.8 mm thick.
What parts does the Fpga notab use?
36 parts, built around the ICE40UP5K-UWG30ITR, AT25DF041B-UUN-T and TPS7A2012PDQNR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fpga notab KiCad files?
From the linuxboot/flashkeeper repository on GitHub, at the commit this page was made from: the board is hw/fpga/fpga_notab.kicad_pcb and its schematic hw/adapter_soldered/breakout_wide/adapter_soldered.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fpga notab design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from linuxboot/flashkeeper
11- 2 layers55 × 26.5 mm
- 2 layers91.5 × 92.5 mm
- 2 layers29.8 × 40.6 mm
- 2 layers11.5 × 17.9 mm
- 2 layers40.2 × 92.5 mm
- 2 layers6.6 × 18.7 mm
- 2 layers9 × 7.8 mm
- 2 layers7 × 7.8 mm
- 2 layers9 × 7.1 mm
- 2 layers11 × 7.1 mm
Similar boards
- 4 layers13 × 9.4 mm
Tomu fpga
AlexeyInwerp/BoardRipper
Web-based PCB boardview viewer for board-level repair. 14 formats: BVR1/3, BRD, BDV, BDV ASC, FZ, GenCAD, Mentor Neutral, XZZ, TVW, Allegro v15-v18, Altium, KiCad, EAGLE.
55 parts48AGPL-3.0 - 6 layers32 × 20 mm
LPF A v1
macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
36 parts94MIT - 6 layers64 × 52 mm
PQ BotBoard
abelwu2001/Picosat-Pocketcube-UTN-FRC-2026
Proyecto Final para el armado de un nanoSat
36 parts3 - 6 layers146.8 × 32 mm
- 6 layers68.6 × 76.7 mm
- 6 layers20 × 20 mm
- 6 layers26.5 × 45 mm
Final Projeco
NotaScout/ENGR342
// It be a ESP-32 S2 based Microcontroller with Wifi-antenna, Innit?
35 partsMIT - 6 layers16 × 15 mm
