6 layers70 × 71.1 mm
2 layers11.5 × 17.9 mm
Adapter soldered
linuxboot/flashkeeper6Documentation | Source | Join us on Matrix!
- Size
- 11.5 × 17.9 mm
- Copper layers
- 2
- Thickness
- 0.12 mm
- Parts
- 13
- Nets
- 22
- Pads
- 74
- Tracks, vias
- 288, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Oct 2024
- Updated
- 8 Oct 2026
Overview
Adapter soldered is an open-source printed circuit board by linuxboot, from the linuxboot/flashkeeper repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 11.5 × 17.9 mm with 13 parts on 22 nets, routed with 288 tracks and 18 vias.
It is built around the BAT30F4, 2DC4617QLP and B73180A0101M062, with the CMT-322-65-SMT-TR among its other parts. Its parts include 3 ICs, 2 resistors, 2 diodes, 1 capacitor and 1 transistor. It belongs with the interfaces and adapters boards of this library.
Main components
4
BAT30F4
0201Schottky DiodesTECH PUBLIC2DC4617QLP
DFN-3(1x0.6)-55℃~+150℃ 1 NPN 100MHz 100mA 100nA 120 1W 200mV 50V 5V NPN DFN-3(1x0.6) Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)B73180A0101M062
-- New Arrivals ROHSTDKUncategorised
CMT-322-65-SMT-TR
SMD,3.2x3.2mm-20℃~+70℃ 2V~4V 2mm 3.2mm 3.2mm 4kHz 65dB Electromagnetic Passive (Externally Driven) SMD,3.2x3.2mm Buzzers ROHSCUIBuzzers
README
README.mdFlashkeeper
Manage and Protect your SPI Flash Chip!
Documentation | Source | Join us on Matrix!
Flashkeeper is a family of open-hardware add-ons for standard SOIC-8 and WSON-8 SPI NOR flash chips (as are commonly used for firmware storage in PCs and other electronics), providing functionality for write-protection control, SPI bus breakout, flash device emulation, reprogramming, and state validation.
Flashkeeper development takes place on the 15h.org Git forge, and is mirrored to Github as a backup. If you wish to participate in Flashkeeper development on 15h.org infrastructure, please request an account in either the Flashkeeper room or the 15h.org room on Matrix. Issues may be opened on either 15h.org or Github.
For user information, please see the documentation. For hardware source files, see hw/.
The Flashkeeper project is supported by NLnet NGI Zero Core.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | BAT30F4 | Diode_SMD:D_0201_0603Metric | D1, D2 |
| 1 | 1-2328702-0 | flashkeeper:TE_1-2328702-0 | J1 |
| 1 | 180 | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 1uF | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | 2DC4617QLP | Package_DFN_QFN:Diodes_DFN1006-3 | Q1 |
| 1 | 8.2k | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | B73180A0101M062 | Capacitor_SMD:C_1812_4532Metric | BT1 |
| 1 | CMT-322-65-SMT-TR | flashkeeper:XDCR_CMT-322-65-SMT-TR | LS1 |
| 1 | NCP171AMX165160TCG | flashkeeper:VREG_NCP171AMX180175TCG | U3 |
| 1 | SPI Flash | flashkeeper:SolderConnector_SOIC8Wide_1.5mmLift | U1 |
| 1 | Solder | flashkeeper:SolderJumper_0.4mm | JP1 |
| 1 | ~ | flashkeeper:FlashkeeperFPGASoM_ReducedPins | U2 |
Questions
How big is the Adapter soldered PCB?
It measures 11.5 × 17.9 mm and has 2 copper layers, 0.12 mm thick.
What parts does the Adapter soldered use?
13 parts, built around the BAT30F4, 2DC4617QLP, B73180A0101M062 and CMT-322-65-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adapter soldered KiCad files?
From the linuxboot/flashkeeper repository on GitHub, at the commit this page was made from: the board is hw/adapter_soldered/fpga_wide/adapter_soldered.kicad_pcb and its schematic hw/adapter_soldered/breakout_wide/adapter_soldered.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adapter soldered design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from linuxboot/flashkeeper
11- 2 layers55 × 26.5 mm
- 6 layers7.2 × 3.3 mm
- 2 layers91.5 × 92.5 mm
- 2 layers29.8 × 40.6 mm
- 2 layers40.2 × 92.5 mm
- 2 layers6.6 × 18.7 mm
- 2 layers9 × 7.8 mm
- 2 layers7 × 7.8 mm
- 2 layers9 × 7.1 mm
- 2 layers11 × 7.1 mm
Similar boards
- 4 layers73 × 46 mm
- 4 layers46.3 × 15 mm
- 6 layers14 × 8 mm
- 2 layers58 × 36 mm
Faikout
dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
83 partsGPL-3.0 - 4 layers27.3 × 9.3 mm
- 6 layers45 × 75 mm
- 2 layers39 × 65 mm
Faikout
Rsa76d/FaikoutRSA
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
91 partsGPL-3.0 - 2 layers40 × 20 mm
