6 layers70 × 71.1 mm
2 layers11 × 7.1 mm
Adapter soldered
linuxboot/flashkeeper6Documentation | Source | Join us on Matrix!
- Size
- 11 × 7.1 mm
- Copper layers
- 2
- Thickness
- 0.12 mm
- Parts
- 2
- Nets
- 8
- Pads
- 18
- Tracks, vias
- 22, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Oct 2024
- Updated
- 8 Oct 2026
Overview
Adapter soldered is an open-source printed circuit board by linuxboot, from the linuxboot/flashkeeper repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 11 × 7.1 mm with 2 parts on 8 nets, routed with 22 tracks and 4 vias.
Its parts include 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
README
README.mdFlashkeeper
Manage and Protect your SPI Flash Chip!
Documentation | Source | Join us on Matrix!
Flashkeeper is a family of open-hardware add-ons for standard SOIC-8 and WSON-8 SPI NOR flash chips (as are commonly used for firmware storage in PCs and other electronics), providing functionality for write-protection control, SPI bus breakout, flash device emulation, reprogramming, and state validation.
Flashkeeper development takes place on the 15h.org Git forge, and is mirrored to Github as a backup. If you wish to participate in Flashkeeper development on 15h.org infrastructure, please request an account in either the Flashkeeper room or the 15h.org room on Matrix. Issues may be opened on either 15h.org or Github.
For user information, please see the documentation. For hardware source files, see hw/.
The Flashkeeper project is supported by NLnet NGI Zero Core.
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | FFC | flashkeeper:TE_2328702-8 | J1 |
| 1 | SPI Flash | flashkeeper:SolderConnector_WSON8x6 | U1 |
Questions
How big is the Adapter soldered PCB?
It measures 11 × 7.1 mm and has 2 copper layers, 0.12 mm thick.
What parts does the Adapter soldered use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adapter soldered KiCad files?
From the linuxboot/flashkeeper repository on GitHub, at the commit this page was made from: the board is hw/adapter_soldered/breakout_wson/adapter_soldered.kicad_pcb and its schematic hw/adapter_soldered/breakout_wide/adapter_soldered.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adapter soldered design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from linuxboot/flashkeeper
11- 2 layers55 × 26.5 mm
- 6 layers7.2 × 3.3 mm
- 2 layers91.5 × 92.5 mm
- 2 layers29.8 × 40.6 mm
- 2 layers11.5 × 17.9 mm
- 2 layers40.2 × 92.5 mm
- 2 layers6.6 × 18.7 mm
- 2 layers9 × 7.8 mm
- 2 layers7 × 7.8 mm
- 2 layers9 × 7.1 mm
Similar boards
- 2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0 - 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
