6 layers51 × 47 mm
6 layers26.5 × 45 mm
Final Projeco
NotaScout/ENGR342// It be a ESP-32 S2 based Microcontroller with Wifi-antenna, Innit?
- Size
- 26.5 × 45 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 35
- Nets
- 61
- Pads
- 201
- Tracks, vias
- 737, 96
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Apr 2024
- Updated
- 13 May 2024
Overview
Final Projeco is an open-source printed circuit board by NotaScout, from the NotaScout/ENGR342 repository on GitHub, published under the MIT licence. It is a 6-layer board of 26.5 × 45 mm with 35 parts on 61 nets, routed with 737 tracks and 96 vias.
It is built around the ESP32-S3, PTS830GG140SMTRLFS and GT-USB-7004N, with the LY68L6400SLIT and TZ1269D among its other parts. Its parts include 16 capacitors, 7 ICs, 6 resistors, 3 diodes and 1 crystal. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
5
ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
PTS830GG140SMTRLFS
插件-40℃~+85℃ 12V 2.6mm 3.05mm 4.5N 50mA Gull Wing Round Button SPST-NO Surface Mount,Vertical 插件 Tactile Switches ROHSC&KTactile Switches
GT-USB-7004N
SMD-40℃~+85℃ 1 1.68mm 10,000 Cycles 16P 24V 5A 8.35mm Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSG-SwitchUSB Connectors
LY68L6400SLIT
SOP-8SRAMLyontek Inc.
TZ1269D
SMD2016-4P-40℃~+85℃ 40MHz 9pF Crystal Oscillator ±5ppm SMD2016-4P Crystals ROHSTSTCrystals
README
README.md// ENGR 342
// It be a ESP-32 S2 based Microcontroller with Wifi-antenna, Innit?
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C10, C11, C12 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C9, C13, C14, C15, C16 |
| 3 | SD103AWS_C5345966 | jlc:SOD-323_L1.7-W1.3-LS2.5-RD | D1, D2, D3 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | 13pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | PTS830GG140SMTRLFS | jlc:KEY-SMD_4P-L3.1-W2.6_PTS830GG140SMTRLFS | U5, U6 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 220S-2*16P_H=8_5MM_Ytype_L=3_0MM_PBT | jlc:HDR-TH_32P-P2.54-V-F-R2-C16-S2.54 | U7 |
| 1 | 442k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U1 |
| 1 | GT-USB-7004N | jlc:USB-C-SMD_GT-USB-7004 | U2 |
| 1 | LOGO | Schoon:small_front_monochrome | G*** |
| 1 | LY68L6400SLIT | jlc:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | U4 |
| 1 | NCP167BMX330TBG | jlc:XDFN-4_L1.0-W1.0-P0.65-BL-EP | U3 |
| 1 | TZ1269D | jlc:CRYSTAL-SMD_4P-L2.0-W1.6-BL-A | X1 |
| 1 | U_FL-R-SMT-1(10) | jlc:ANT-SMD_UFL-R-SMT-1-10 | JP1 |
Questions
How big is the Final Projeco PCB?
It measures 26.5 × 45 mm and has 6 copper layers, 1.56 mm thick.
What parts does the Final Projeco use?
35 parts, built around the ESP32-S3, PTS830GG140SMTRLFS, GT-USB-7004N and LY68L6400SLIT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Final Projeco KiCad files?
From the NotaScout/ENGR342 repository on GitHub, at the commit this page was made from: the board is Final Projeco.kicad_pcb and its schematic Final Projeco.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Final Projeco design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 2 layers90 × 67 mm
- 2 layers32.2 × 59.4 mm
- 4 layers65 × 30 mm
- 2 layers101.5 × 105.4 mm
- 4 layers65.6 × 41.4 mm
- 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0