2 layers61 × 35 mm
Esp32-1pcb
shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-
Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED
44 parts1
4 layers65 × 30 mm
H7PI
HTCTEK/H7PI19- Size
- 65 × 30 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 93
- Pads
- 303
- Tracks, vias
- 1,798, 264
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Dec 2019
- Updated
- 14 Apr 2020
Overview
H7PI is an open-source printed circuit board by HTCTEK, from the HTCTEK/H7PI repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 65 × 30 mm with 37 parts on 93 nets, routed with 1,798 tracks and 264 vias.
It is built around the STM32H750VBT6, W25Q64JVSSIQ and XKTF-015-N, with the AMS1117-3.3, LY68L6400SLIT and 19-217-R6C-AL1M2VY-3T among its other parts. Its parts include 14 capacitors, 10 resistors, 5 ICs, 4 connectors and 2 diodes. It belongs with the STM32 boards of this library.
Main components
6
STM32H750VBT6
LQFP-100(14x14)-40℃~+85℃ 1.62V~3.6V 128KB 12bit 16bit 1MB 32 Bit 480MHz 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
W25Q64JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 150ms@(64KB) 2.7V~3.6V 20 Years 3ms 64Mbit SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
XKTF-015-N
SMD-25℃~+90℃ 2mm Connector and Ejector MicroSD Card (TF Card) Push-Push SMD SD Card / Memory Card Connector ROHSXKB ConnectionSD Card / Memory Card Connector
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LY68L6400SLIT
SOP-8SRAMLyontek Inc.
19-217-R6C-AL1M2VY-3T
UncategorisedUnknown maker
README
README.mdH7PI
量产版本历史
v0.2 特点：带8bits LCD接口
v1.0 特点：除了SD卡座，QSPI Flash引脚，SPI flash/psram引脚外，引出所有引脚，使用type-c接口，取消8bits LCD接口。
使用说明 / User Manual
中文：使用说明
获取一个H7PI / Buy One
淘宝：购买链接 / shop
Platform
- H7PI_Arduino is for users who are used to develop arduino
- H7PI_Samples is for users who are used to develop with MDK Keil, but also give an entry for arduino and support freeRTOS.
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | R_0402_1005Metric | R1, R2, R3, R5, R6, R7, R14, R15 |
| 6 | 100nF | C_0402_1005Metric | C4, C8, C9, C10, C11, C12 |
| 4 | 12pF | C_0402_1005Metric | C1, C2, C3, C5 |
| 3 | 10uF | C_0402_1005Metric | C7, C13, C14 |
| 2 | 4.7k | R_0402_1005Metric | R4, R9 |
| 2 | Header_2x20 | PinHeader_2x20_P2.54mm_Vertical | J2, J5 |
| 2 | W25Q64JVSSIQ | SOIC-8_5.23x5.23mm_P1.27mm | U4, U5 |
| 1 | 19-217-R6C-AL1M2VY-3T | LED_0603_1608Metric | D3 |
| 1 | 19-217_GHC-YR1S2_3T | LED_0603_1608Metric | D2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 32.768kHz | Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm | X1 |
| 1 | 32MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | X2 |
| 1 | AMS1117-3.3 | SOT-223 | U1 |
| 1 | LY68L6400SLIT | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | STM32H750VBT6 | LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | USBC_16P_4MP | USB_C_Receptacle_Palconn_UTC16-G | J3 |
| 1 | XKTF-015-N | Connector_MicroSD_TF_XKB_XKTF-015-N_14.75x17.5mm | J1 |
Questions
How big is the H7PI PCB?
It measures 65 × 30 mm and has 4 copper layers, 1.6 mm thick.
What parts does the H7PI use?
37 parts, built around the STM32H750VBT6, W25Q64JVSSIQ, XKTF-015-N and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the H7PI KiCad files?
From the HTCTEK/H7PI repository on GitHub, at the commit this page was made from: the board is H7PI/H7PI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the H7PI design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers219.7 × 111.3 mm
ScriptPad PCB
jfm92/scriptPad
The scriptPad project is a macroPad fully customizable with build in USB WebPage allowing to configure every aspect of the device without extra software or web page, everything you need in a single device.
111 partsMIT - 6 layers71.1 × 168.4 mm
Meshtonic h4m v2
Josephrp/meshtonic
Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic
118 parts11 - 2 layers90 × 67 mm
- 2 layers101.5 × 105.4 mm
- 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 2 layers63.5 × 73.7 mm
- 2 layers100 × 61 mm
Wgr
a5632645/final_design
simple digital waveguide synthesizer & simple mpe midi keyboard(pitch bend and pressure)
103 parts4