Skip to the content
2 layers172.7 × 91.4 mmSRX160, the printed circuit board in 3D

Like AgOpenGPS but not. This version is constantly under development.

Size
172.7 × 91.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
100
Nets
77
Pads
271
Tracks, vias
318, 82
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Apr 2025
Updated
22 Aug 2025

Overview

SRX160 is an open-source printed circuit board by lansalot, from the lansalot/AOG_Dev repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 172.7 × 91.4 mm with 100 parts on 77 nets, routed with 318 tracks and 82 vias.

It is built around the DRV8870DDA, 74HC14M/TR and SS26, with the BAT42, XF-506P and SMDRI127-680MT among its other parts. Its parts include 26 capacitors, 18 diodes, 13 resistors, 11 ICs and 5 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

6

README

README.md

AOG Development

Like AgOpenGPS but not. This version is constantly under development.

Parts

100
QtyValueFootprintReferences
120.1uFCapacitor_SMD:C_0603_1608MetricC5, C6, C8, C10, C14, C17, C19, C20, C24, C25, C27, C28
9LEDLED_SMD:LED_0603_1608MetricD1, D4, D5, D6, D8, D15, D16, D17, D18
72.2KResistor_SMD:R_0603_1608MetricR6, R7, R8, R10, R11, R12, R13
6470uFCapacitor_SMD:CP_Elec_10x10.5C2, C3, C4, C21, C22, C23
647uFCapacitor_SMD:CP_Elec_6.3x5.4C1, C7, C9, C26, C29, C30
5DRV8870DDARC17Footprints:DRV8251ADDRU1, U4, U8, U9, U10
5SS26Diode_SMD:D_SMAD2, D3, D7, D11, D14
4BAT42RC17Footprints:SOD-323D9, D10, D12, D13
4MountingHoleMountingHole:MountingHole_5.3mm_M5_DIN965_PadH1, H2, H3, H4
4WirePadRC17Footprints:SolderWirePad165VSensors1, FlowGnd1, PressureGnd1, SensorGnd1
3GroundRC17Footprints:PowerPinJ2, J3, J6
212VRC17Footprints:PowerPinJ1, J5
21uFCapacitor_SMD:C_0805_2012MetricC13, C18
2470Resistor_SMD:R_0603_1608MetricR3, R4
2470Capacitor_SMD:C_0603_1608MetricR1, R9
2C492610RC17Footprints:Fuse_Holder_C492610F1, F2
2LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU2, U5
2MCP6002-xPPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU6, U7
2SMDRI127-680MTRC17Footprints:TMPA1265SP-101MN-DL1, L2
2~RC17Footprints:SolderWirePad16Sec1, Sec2
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5
110KRC17Footprints:PotentiometerRV3
110kRC17Footprints:PotentiometerRV4
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
174HC14MPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU11
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Flow InRC17Footprints:SolderWirePad16FlowPin1
1Flow Ohms1TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mmTP7
1Flow Ohms2TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mmTP8
1LM7809_TO220Package_TO_SOT_THT:TO-220-3_VerticalU3
1Motor ARC17Footprints:SolderWirePad16MotorA1
1Motor BRC17Footprints:SolderWirePad16MotorB1
1PressureRC17Footprints:SolderWirePad16Pressure1
1Pressure Ohms1TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mmTP5
1Pressure Ohms2TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mmTP6
1Sec 3RC17Footprints:SolderWirePad16Sec3
1Sec 4RC17Footprints:SolderWirePad16Sec4

More from lansalot/AOG_Dev

2
  • 2 layers157 × 88 mmRC17, the printed circuit board in 3D

    RC17

    lansalot/AOG_Dev

    Like AgOpenGPS but not. This version is constantly under development.

    111 partsGPL-3.0
  • 2 layers172.7 × 91.4 mmNanoSprayLinear, the printed circuit board in 3D

    NanoSprayLinear

    lansalot/AOG_Dev

    Like AgOpenGPS but not. This version is constantly under development.

    90 partsGPL-3.0

Similar boards

  • 4 layers159 × 130 mmRC11, the printed circuit board in 3D

    RC11

    AgOpenGPS-Official/Rate_Control

    106 parts20GPL-3.0
  • 2 layers165 × 127 mmAS15, the printed circuit board in 3D

    AS15

    SK21/AOG_AutoSteer

    AOG autosteer

    85 parts1
  • 2 layers95 × 82 mmOrc, the printed circuit board in 3D

    Orc

    aramder/orc

    Open replacement controller board for surplus Motorola PMUN1046A relay boxes: ESP32-C3, CANopen control, 10 x 15 A channels. Independent project, not affiliated with Motorola Solutions.

    85 parts
  • 4 layers92.1 × 62.8 mmMotor controller, the printed circuit board in 3D

    Motor controller

    mohamed-belal-10/can-motor-controller-node

    CAN-connected closed-loop DC motor controller node — KiCad hardware (STM32F103, DRV8874, SN65HVD230) with an AS5600 encoder sub-PCB

    55 partsMIT
  • 2 layers165 × 127 mmYF1, the printed circuit board in 3D

    YF1

    SK21/YieldFlo

    YieldFlo is a combine yield and moisture monitoring system that works alongside AgOpenGPS. A Windows desktop app records yield rate, moisture, and GPS position continuously while harvesting, and produces spatial yield…

    60 parts5GPL-3.0
  • 4 layers83 × 67.5 mmMarineBoard, the printed circuit board in 3D

    MarineBoard

    Cadburies/SisuAssistant

    Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.

    162 parts1Apache-2.0
  • 2 layers98 × 98 mmPixel Tree Controller, the printed circuit board in 3D

    Pixel Tree Controller

    Ben-BJD/Pixel-Tree-Controller

    Safely power 800 LEDs with one 22A ESP32 WLED controller

    28 parts
  • 4 layers70 × 157.5 mmTv Lift easy, the printed circuit board in 3D

    Tv Lift easy

    vyrubaev/TV-Lift-Controller

    TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.

    100 parts

Questions

How big is the SRX160 PCB?

It measures 172.7 × 91.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SRX160 use?

100 parts, built around the DRV8870DDA, 74HC14M/TR, SS26 and BAT42. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SRX160 KiCad files?

From the lansalot/AOG_Dev repository on GitHub, at the commit this page was made from: the board is Sprayer/Board/SRX160/SRX160.kicad_pcb and its schematic Sprayer/Board/NanoSprayLinear/Analog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SRX160 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).