Skip to the content
1234567899999999

DRV8870DDA

Texas InstrumentsExtended

-40℃~+125℃ 1 3.6A 565mΩ 6.5V~45V 6.5V~45V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Overvoltage Protection、Built-in charge pump、Power-on reset、Dead-time / shoot-through protection Yes SO-8 Stepper Motor Driver ROHS

Part id
ti/DRV8870DDA
Category
Stepper Motor Driver
Package
SO-8
Pins
9
In stock
0 at JLCPCB (C1556925)
Used on
38 open-source boards

Overview

The DRV8870DDA is a stepper Motor Driver made by Texas Instruments in a SO-8 package with 9 pins. -40℃~+125℃ 1 3.6A 565mΩ 6.5V~45V 6.5V~45V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Overvoltage Protection、Built-in charge pump、Power-on reset、Dead-time / shoot-through protection Yes SO-8 Stepper Motor Driver ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8870DDA, from KiCad's library) and its footprint (Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1556925). 38 open-source boards in 33 repositories on GitHub use it.

Symbol

1GND2IN23IN14VREF5VM6OUT17ISEN8OUT2
Driver_Motor:DRV8870DDAFrom KiCad's library

Footprint

1234567899999999
Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalViasFrom KiCad's library

From the datasheet

14
Supply, least
6.5 V · VM, recommended operating, min · p. 4
Supply, most
45 V · VM, recommended operating, max · p. 4
Supply, absolute maximum
50 V · VM, absolute maximum · p. 3
Works from
-40 °C · operating ambient, min · p. 4
Works up to
125 °C · operating ambient, max · p. 4
Junction, hottest
150 °C · operating junction, absolute maximum · p. 3
Takes working
3 mA · VM operating supply current, VM = 12 V, typical · p. 5
Takes at most
10 mA · VM operating supply current, VM = 12 V, max · p. 5
Takes asleep
10 µA · VM sleep current, VM = 12 V, max · p. 5
Gives
3.5 A · H-bridge output, 100% duty cycle, absolute maximum · p. 3
Current limit
4.5 A · overcurrent protection trip level, typical · p. 5
Junction to air (DDA (HSOP))
41.1 K/W · junction to ambient, typical · p. 4
Junction to board (DDA (HSOP))
23.1 K/W · junction to board, typical · p. 4
Junction to case (DDA (HSOP))
53.1 K/W · junction to case top, typical · p. 4

Open-source boards using it

38See all 38
  • 2 layers31 × 57.2 mmDRV8870-BDC Motor Driver, the printed circuit board in 3D

    DRV8870-BDC Motor Driver

    Mario8472/DRV8870-BDC-Motor-Driver

    KiCad files for DRV8870 BDC Motor Driver

    26 parts3
  • 4 layers96 × 96 mmStepper controller v2, the printed circuit board in 3D

    Stepper controller v2

    Pmitrega/Telescope_Guider

    Build driver for autoguiding

    153 parts2
  • 2 layers85 × 50 mmFinal Proyect, the printed circuit board in 3D

    Final Proyect

    Daniqnn/Proyecto_Final

    Proyecto final de Mecatronica, ITLA 2026 C1. Made by José Mañón, Cesar Camacho, Henry bautista, Wilmir Calcaño y Harlin Fransisco.

    91 parts1
  • 2 layers27 × 40 mmDRV8870-breakout board, the printed circuit board in 3D

    DRV8870-breakout board

    szolotykh/DRV8870-breakout-board

    Breakout board for DRV8870 motor driver

    12 parts1MIT
  • 4 layers75 × 60 mmSmart motor controller, the printed circuit board in 3D

    Smart motor controller

    szolotykh/kinisi-motor-controller-board

    Kinisi motor controller board based on STM32F405 microcontroller

    79 parts1MIT
  • 2 layers79.6 × 83.7 mmCar, the printed circuit board in 3D

    Car

    0529003/2023EC8T6

    2024电赛训练题2023E

    97 parts
  • 2 layers70 × 45 mmRobotBalanceador, the printed circuit board in 3D

    RobotBalanceador

    AlexRuizDiaz/RobotBalanceador

    Robot balanceador de PSM2

    73 parts
  • 4 layers100 × 50 mmDcesc ga25, the printed circuit board in 3D

    Dcesc ga25

    baden/roboarm

    Так, це роборука.

    219 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the DRV8870DDA?

Yes. The symbol is Driver_Motor:DRV8870DDA and the footprint Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8870DDA?

SO-8, with 9 pins. Its footprint is drawn on this page.

Where is the DRV8870DDA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8870DDA?

JLCPCB lists it as part C1556925, with 0 in stock; the sellers' links on this page open their listings.

What can replace the DRV8870DDA?

Parts like it in the library: the DRV8872DDAR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8870DDA?

38 boards in 33 repositories on GitHub; the most starred are listed on this page, with their KiCad files.