Skip to the content
2 layers213 × 24 mmController, the printed circuit board in 3D
Size
213 × 24 mm
Copper layers
2
Thickness
1.6 mm
Parts
94
Nets
55
Pads
303
Tracks, vias
518, 175
Pours
6
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Sep 2019
Updated
26 Jan 2022

Overview

Controller is an open-source printed circuit board by kuellenberg, from the kuellenberg/7-Segment-RGB-Clock repository on GitHub. It is a 2-layer board of 213 × 24 mm with 94 parts on 55 nets, routed with 518 tracks and 175 vias.

It is built around the ATMEGA328P-AU, FT232RL and LMV301MG, with the 74AHC1G14GV, DS3231MZ+ and MBR130 among its other parts. Its parts include 27 capacitors, 18 resistors, 7 connectors, 5 ICs and 4 fuses. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

8

README

README.md

7-Segment-RGB-Clock

Parts

94
QtyValueFootprintReferences
13100nFCapacitor_SMD:C_0603_1608MetricC7, C8, C10, C12, C13, C15, C16, C18, C20, C21, C22, C24, C27
81kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R13
5LEDLED_SMD:LED_0603_1608MetricLD3, LD4, LD5, LD6, LD7
410nFCapacitor_SMD:C_0603_1608MetricC6, C14, C17, C19
44k7Resistor_SMD:R_0603_1608MetricR8, R9, R16, R17
310uHInductor_SMD:L_0805_2012MetricL1, L2, L3
3??Resistor_SMD:R_0603_1608MetricR10, R15, R18
2100uFCapacitor_SMD:C_Elec_6.3x5.8C4, C5
210kResistor_SMD:R_0603_1608MetricR11, R12
2330uFCapacitor_SMD:CP_Elec_10x10C1, C2
24u7Capacitor_SMD:C_Elec_4x5.8C9, C11
2Conn_02x04_Top_Bottomak:HARWIN_M20-8890845J1, J4
2GNDTestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_BeadedTP2, TP4
2LED blueLED_SMD:LED_0603_1608MetricLD1, LD2
2MBR130Diode_SMD:D_SOD-123D1, D2
2Mounting HoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2
2Polyfuse 500mAak:Fuse_1812_4532MetricF3, F4
2SI4435FDYPackage_SO:SO-8_5.3x6.2mm_P1.27mmQ1, Q2
1+15VTestPoint:TestPoint_Pad_D2.0mmTP16
1+BATTTestPoint:TestPoint_Pad_D2.0mmTP12
1100RResistor_SMD:R_0603_1608MetricR14
110nFCapacitor_SMD:C_0805_2012MetricC3
115VConnectors_JST:JST_XH_B03B-XH-A_03x2.50mm_StraightJ2
116MHzak:CSTNEY1
11Fak:FC0H105ZFTBR44C26
11uFCapacitor_SMD:C_0603_1608MetricC23
15VConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ5
174AHC1G14Package_TO_SOT_SMD:SOT-23-5U4
1??Capacitor_SMD:C_0603_1608MetricC25
1ATmega328P-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU2
1Conn_01x02Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ6
1Conn_02x03_Top_BottomConnector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ3
1DS3231MPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU3
1FT232RLPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU1
1Fuse 1Aak:Fuseholder_SMD_Littelfuse_154F2
1Fuse 4Aak:Fuseholder_SMD_Littelfuse_154F1
1JumperConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJP1
1LMV301Package_TO_SOT_SMD:SOT-353_SC-70-5U5
1PD_OUTTestPoint:TestPoint_Pad_D2.0mmTP5
1RESETButton_Switch_THT:SW_PUSH_6mmSW1
1RTC_1PPSTestPoint:TestPoint_Pad_D2.0mmTP1
1RTC_32KTestPoint:TestPoint_Pad_D2.0mmTP3
1SFH 2440OptoDevice:Osram_SMD-DIL2_4.5x4.0mmPD1
1SQ2309ESPackage_TO_SOT_SMD:SOT-23Q3
1TLC_BLANKTestPoint:TestPoint_Pad_D2.0mmTP11
1TLC_LATTestPoint:TestPoint_Pad_D2.0mmTP10
1TLC_SCLTestPoint:TestPoint_Pad_D2.0mmTP9
1TLC_SDATestPoint:TestPoint_Pad_D2.0mmTP7
1USB_AConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ7
1VBUSTestPoint:TestPoint_Pad_D2.0mmTP13

More from kuellenberg/7-Segment-RGB-Clock

3
  • 2 layers140.5 × 213 mmDigit Colon, the printed circuit board in 3D

    Digit Colon

    kuellenberg/7-Segment-RGB-Clock

    116 parts
  • 2 layers213 × 25 mmController, the printed circuit board in 3D

    Controller

    kuellenberg/7-Segment-RGB-Clock

    93 parts
  • 2 layers180.7 × 180.7 mmPower supply, the printed circuit board in 3D

    Power supply

    kuellenberg/7-Segment-RGB-Clock

    58 parts

Similar boards

  • 2 layers60 × 100 mmHpboard, the printed circuit board in 3D

    Hpboard

    c0pperdragon/HotPlate

    Cheap DIY solution to make a heater for hot-plate soldering.

    32 parts48
  • 2 layers103.3 × 39.9 mmBMS, the printed circuit board in 3D

    BMS

    kbader94/OpenActionCam

    44 parts
  • 4 layers97.8 × 69.8 mmICE40UPDevBoard, the printed circuit board in 3D

    ICE40UPDevBoard

    aslak3/ICE40UPDevBoard

    A development board for iCE40UP5K FPGAs

    96 parts10GPL-2.0
  • 2 layers121.3 × 139.1 mmLed clock, the printed circuit board in 3D

    Led clock

    stevenrkeyes/led_clock_hardware

    328 parts
  • 4 layers100 × 94 mmPicohome2, the printed circuit board in 3D

    Picohome2

    racerxdl/picohome

    Raspberry Pi Pico Home Automation using CAN Bus

    123 parts90Apache-2.0
  • 2 layers17.8 × 28 mmHackaBLE, the printed circuit board in 3D

    HackaBLE

    electronut/ElectronutLabs-hackaBLE

    A tiny Nordic nRF52832 based board you can embed in your BLE projects.

    33 parts43
  • 4 layers44.5 × 34.9 mmEclair, the printed circuit board in 3D

    Eclair

    upbeatcarri/eclair

    Pocket device for taking quick notes, acting as a USB keyboard for PC sync etc., with custom apps samd21, tinygo

    56 parts25
  • 2 layers54 × 26 mmReTuLaReMake, the printed circuit board in 3D

    ReTuLaReMake

    hoglet67/ReTuLaReMake

    Open Source Tube ULA Remake

    28 parts6

Questions

How big is the Controller PCB?

It measures 213 × 24 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controller use?

94 parts, built around the ATMEGA328P-AU, FT232RL, LMV301MG and 74AHC1G14GV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller KiCad files?

From the kuellenberg/7-Segment-RGB-Clock repository on GitHub, at the commit this page was made from: the board is Controller Rev. B/Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask kuellenberg before reusing the design.