2 layers54 × 26 mm
2 layers54 × 26 mm
ReTuLaReMake
hoglet67/ReTuLaReMake6Open Source Tube ULA Remake
- Size
- 54 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 101
- Pads
- 199
- Tracks, vias
- 240, 44
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Nov 2023
- Updated
- 5 Oct 2026
Overview
ReTuLaReMake is an open-source printed circuit board by hoglet67, from the hoglet67/ReTuLaReMake repository on GitHub. It is a 2-layer board of 54 × 26 mm with 28 parts on 101 nets, routed with 240 tracks and 44 vias.
It is built around the ATF1508AS-10AU100 and MBR130. Its parts include 12 resistors, 10 capacitors, 3 connectors, 2 diodes and 1 IC. It belongs with the FPGA and CPLD boards of this library.
Main components
2
ATF1508AS-10AU100
TQFP-100(14x14)-40℃~+85℃ 10ns 128 4.5V~5.5V 80 ATF15xx In-system programming Supports UID protection TQFP-100(14x14) Programmable Logic Device (CPLDs/FPGAs) ROHSMicrochip TechnologyProgrammable Logic Device (CPLDs/FPGAs)
MBR130
SOD-123-65℃~+125℃ 1 Independent 1A 30V 470mV@1A 5.5A 60uA@30V SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 3 | NF | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12 |
| 2 | MBR130 | Diode_SMD:D_SOD-123 | D1, D2 |
| 1 | 10u | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C9 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 40 Pin DIP Header | myfootprints:DIP-40_W15.24mm_Header | J1 |
| 1 | 47p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | ATF1508AS-10AU100 | Package_QFP:TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
More from hoglet67/ReTuLaReMake
1Similar boards
- 4 layers100 × 100 mm
Retro-003
githubgilhad/HW-001
HD6309 - HW deska pro CPU+RAM+GLUE+SystemBus - prvni navrh
297 partsGPL-3.0 - 4 layers123.4 × 129.8 mm
Zx50 MemoryCard RevA
mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.
53 parts - 4 layers100 × 94 mm
- 2 layers17.8 × 28 mm
HackaBLE
electronut/ElectronutLabs-hackaBLE
A tiny Nordic nRF52832 based board you can embed in your BLE projects.
33 parts43 - 4 layers44.5 × 34.9 mm
Eclair
upbeatcarri/eclair
Pocket device for taking quick notes, acting as a USB keyboard for PC sync etc., with custom apps samd21, tinygo
56 parts25 - 4 layers97.8 × 69.8 mm
- 4 layers99.1 × 83.8 mm
Ibm-5151-pcb
asinghani/ibm-5151-controller
Building a VT100 emulator out of an IBM 5151 monitor and an FPGA
85 partsMIT - 2 layers25.6 × 0 mm
Questions
How big is the ReTuLaReMake PCB?
It measures 54 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ReTuLaReMake use?
28 parts, built around the ATF1508AS-10AU100 and MBR130. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ReTuLaReMake KiCad files?
From the hoglet67/ReTuLaReMake repository on GitHub, at the commit this page was made from: the board is kicad/ReTuLaReMake.kicad_pcb and its schematic kicad/ReTuLaReMake.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ReTuLaReMake design in my own project?
Its repository states no licence, so its author keeps all rights: ask hoglet67 before reusing the design.