

Picohome2
Raspberry Pi Pico Home Automation using CAN Bus
- Size
- 100 × 94 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 123
- Nets
- 65
- Pads
- 392
- Tracks, vias
- 629, 77
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Sep 2022
- Updated
- 22 Apr 2023
Overview
Picohome2 is an open-source printed circuit board by racerxdl, from the racerxdl/picohome repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 100 × 94 mm with 123 parts on 65 nets, routed with 629 tracks and 77 vias.
It is built around the TJA1051T/3/1 and MBR130. Its parts include 45 resistors, 39 capacitors, 18 ICs, 6 connectors and 5 diodes. It belongs with the home automation and IoT and interfaces and adapters boards and the RP2040 boards of this library.
Main components
2README
README.mdPicoHome (WIP)
Raspberry Pi Pico Home Automation using CAN Bus
PLEASE READ LICENSE WARNING SECTION BEFORE USE
This project is a improvement over my older home automation projects such as espshift. It all started when I wanted to make my own home automation project for learning and I didn't wanted to rely on Wireless Connections for my automation.
This project consists of few parts:
- picohome-input => Board with opto-coupled inputs which works from 12V to 24V switches.
- picohome-relay => Board that fits on cheap chinese 16 relay board
The main idea is to be able to put everything inside a metal box and forget about it. So far I'm still iterating over designs (I'm running my own home automation for a few years already) and trying to make it less dependent of computers and such.
Work-in-progress = More details to come.
Universal firmware: https://github.com/racerxdl/piho
LICENSE WARNING
Although all the code and schematics I did here is released under Apache / Creative Commons, the CAN2040 library is released under GPL. The creator of can2040 library doesn't seen to be willing to release it in another license (see https://github.com/KevinOConnor/can2040/issues/5 ) so basically since GPL is more restritive than the one I released, you should follow the GPL for this project.
So how that affects you? It will only affect you if you do distribute a binary version of the firmware. In this case GPL demands you to also release the source code. That's only likely to affect you if you're doing a commercial project and doesn't want to share the source code. Otherwise, you don't need to worry about it.
Although the can2040 library is GPL, everything else here will be as described in LICENSE. If anyone knows or want to do a replacement for can2040 library, let me know :D
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +16 |
| 22 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 +6 |
| 16 | 2k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 16 | PC817 | Package_DIP:DIP-4_W7.62mm | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16 |
| 3 | 560R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36, R37, R38 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D5 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C34, C36 |
| 2 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C33, C35 |
| 2 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C38 |
| 2 | 24VDC | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J3, J4 |
| 2 | 59R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43, R45 |
| 2 | BUSTERM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5, JP7 |
| 2 | LVCONN | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J1, J2 |
| 2 | MBR130 | EasyEda:SOD-123_L2.7-W1.6-LS3.7-RD-1 | D1, D2 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C39 |
| 1 | A0 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | A1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | A2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | A3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | A4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP6 |
| 1 | GND1 | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | GND1 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP1 |
| 1 | Input | TerminalBlock_Altech:Altech_AK300_1x16_P5.00mm_45-Degree | J8 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U17 |
| 1 | RESET | EasyEda:SW-SMD_4P-L6.2-W6.2-P4.50-LS9.0 | SW1 |
| 1 | SWD | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U18 |
More from racerxdl/picohome
1- 4 layers90 × 47 mm

Similar boards
- 2 layers17.8 × 28 mm

HackaBLE
electronut/ElectronutLabs-hackaBLE
A tiny Nordic nRF52832 based board you can embed in your BLE projects.
33 parts43 - 4 layers44.5 × 34.9 mm

Eclair
upbeatcarri/eclair
Pocket device for taking quick notes, acting as a USB keyboard for PC sync etc., with custom apps samd21, tinygo
56 parts25 - 4 layers97.8 × 69.8 mm

- 2 layers54 × 26 mm

- 4 layers99.1 × 83.8 mm

Ibm-5151-pcb
asinghani/ibm-5151-controller
Building a VT100 emulator out of an IBM 5151 monitor and an FPGA
85 partsMIT - 2 layers25.6 × 0 mm

- 2 layers60 × 21.1 mm

- 2 layers34 × 44.4 mm

Questions
How big is the Picohome2 PCB?
It measures 100 × 94 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Picohome2 use?
123 parts, built around the TJA1051T/3/1 and MBR130. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Picohome2 KiCad files?
From the racerxdl/picohome repository on GitHub, at the commit this page was made from: the board is pico-input/hw/picohome2.kicad_pcb and its schematic pico-input/hw/picohome2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Picohome2 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).