2 layers167 × 52 mm
In-2-nixie
mistic100/Nixie-Clock-IN2
Check out my other projects: - Nixie Clock IN14 - Nixie Clock IN12 - IV-27 VFD Clock
34 parts10
2 layers50 × 80 mm
Ferienpass
ktt-ol/FerienpassFerienpass KtT 2017
- Size
- 50 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 30
- Pads
- 71
- Tracks, vias
- 147, 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Feb 2017
- Updated
- 20 Jan 2018
Overview
Ferienpass is an open-source printed circuit board by ktt-ol, from the ktt-ol/Ferienpass repository on GitHub. It is a 2-layer board of 50 × 80 mm with 14 parts on 30 nets, routed with 147 tracks and 1 via.
It is built around the BME280 and WS2812B. Its parts include 5 connectors, 2 ICs, 1 capacitor, 1 resistor and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
2README
README.mdFerienpass
Submodules
We use the kicad-ESP8266 Libary form jdunmire.
To clone the whole Repository including the submodules simpy use the --recusive Option or run the Commands git submodule init && git submodule update inside this repository adter cloning.
Arduino Library
Install the following librarys via the Arduino IDE:
- Adafruit BME280 Library
- Adafruit GFX LIbrary
- Adafruit NeoPixel
- Adafruit Unified Sensor
- ACROBOTIC SSD1306
Modify three lib-files (first two for I2C):
- Adafruit_BME280.h: Line 32: Change
BME280_ADDRESSfrom0x77to0x76 - Adafruit_BME280.cpp: Line 50: Change
Wire.begin();toWire.begin(5, 4); // Pin D1, D2 of ESP - Adafruit_SSD1306.h: Line 73/74: use line 73
#define SSD1306_128_64instead of line 74#define SSD1306_128_32
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.97" OLED | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | J4 |
| 1 | 10K | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 2200µF | Capacitors_THT:CP_Radial_D10.0mm_P2.50mm | C1 |
| 1 | BEEPER_JUMP | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP2 |
| 1 | BME280 | Socket_Strips:Socket_Strip_Straight_1x06_Pitch2.54mm | U2 |
| 1 | D | Diodes_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | DEBUG_CONN | Socket_Strips:Socket_Strip_Straight_1x07_Pitch2.54mm | J2 |
| 1 | DSLEEP_JUMP | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | Mic | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | J1 |
| 1 | NodeMCU1.0(ESP-12E) | ESP8266:NodeMCU1.0(12-E) | U1 |
| 1 | PWR_CONN | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | SW_Push | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | SW1 |
| 1 | Speaker | Buzzers_Beepers:MagneticBuzzer_ProSignal_ABT-410-RC | LS1 |
| 1 | WS2812b | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | J5 |
Similar boards
- 2 layers
E ink multi sensor
heckler/esphome-device-configs
Configuration definitions for local ESPHome files
11 parts4Apache-2.0 - 2 layers341.8 × 158.5 mm
Ws2812-clock
CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form
533 parts2GPL-3.0 - 2 layers75.5 × 71 mm
- 2 layers1.3 × 49 mm
- 4 layers90.5 × 67 mm
AS 4
beaked99/air-scales
2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16.
131 parts - 2 layers65 × 77.5 mm
Lora
dharaneesh-m-oss/lorawatch_pcb
Compact LoRa-based Wearable IoT PCB using ESP32 with GPS, MPU6050, BME280, USB-C charging, and battery management designed in KiCad.
41 parts - 2 layers54 × 85 mm
Guardian Sense
ficosta/Guardian-Sense
Guardian-Sense is a versatile hardware project based on the ESP32-S3, designed to monitor environmental conditions and provide real-time data to Zabbix.
38 parts
Questions
How big is the Ferienpass PCB?
It measures 50 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ferienpass use?
14 parts, built around the BME280 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ferienpass KiCad files?
From the ktt-ol/Ferienpass repository on GitHub, at the commit this page was made from: the board is design/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ferienpass design in my own project?
Its repository states no licence, so its author keeps all rights: ask ktt-ol before reusing the design.