

Sword which lights up when orcs are near
- Size
- 66 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 35
- Pads
- 198
- Tracks, vias
- 1,107, 109
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220609)
- Created
- 30 May 2022
- Updated
- 29 Oct 2024
Overview
Tx2 is an open-source printed circuit board by Kreyl, from the Kreyl/tirusse repository on GitHub. It is a 2-layer board of 66 × 39 mm with 55 parts on 35 nets, routed with 1,107 tracks and 109 vias.
It is built around the CC1101RGP and LP2951D. Its parts include 26 capacitors, 7 resistors, 7 fuses, 1 diode and 1 switch. It belongs with the STM32 boards of this library.
Main components
2CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICsLP2951D
SOIC-8-40℃~+125℃@(Tj) 1 1.235V~30V、5V 100mA 30V 430uV 450mV@(100mA) 75uA Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1u | CAP_0603 | C10, C14, C17, C18, C19, C21, C22, C23 |
| 7 | FUSE0R | SOLDERFUSE | F1, F2, F3, F4, F5, F6, F7 |
| 2 | 1.5pF | CAP_0603 | C2, C5 |
| 2 | 100k | RES_0603 | R25, R26 |
| 2 | 10n | CAP_0603 | C7, C9 |
| 2 | 10pF | CAP_0603 | C12, C13 |
| 2 | 10u | CAP_0805 | C20, C24 |
| 2 | 20pF | CAP_0603 | C15, C16 |
| 2 | 220pF | CAP_0603 | C4, C11 |
| 2 | 3.3pF | CAP_0603 | C6, C8 |
| 2 | TESTPOINT | TESTPOINT_1MM | TP1, TP2 |
| 1 | 1000pF | CAP_0603 | C26 |
| 1 | 100R | RES_0603 | R1 |
| 1 | 100pF | CAP_0603 | C1 |
| 1 | 12.0MHz | CRYSTAL_0503x4-4 | XTAL2 |
| 1 | 12k | RES_0603 | R5 |
| 1 | 1pF | CAP_0603 | C3 |
| 1 | 1u | CAP_0603 | C25 |
| 1 | 20k | RES_0603 | R4 |
| 1 | 220R | RES_0603 | R2 |
| 1 | 27MHz | CRYSTAL_03225C4 | XTAL1 |
| 1 | 56k | RES_0603 | R3 |
| 1 | AAT3221 | SOT23-5 | DA2 |
| 1 | ANT_PCB_MONO | ANT_868_MEANDER | ANT1 |
| 1 | CC1101 | QFN20 | DD1 |
| 1 | CONN_1 | SIL-1 | XL3 |
| 1 | CONN_3 | SIL-3 | XL2 |
| 1 | LED | LED-5MM | D4 |
| 1 | LP2951 | SO8E | DA1 |
| 1 | PWRCONN | PWRCON2PIN | XL10 |
| 1 | STM32F10X-48 | LQFP48 | DD2 |
| 1 | ST_SWD | SIL-4 | XL1 |
| 1 | SWITCH | SIL-3 | SW1 |
More from Kreyl/tirusse
1- 4 layers21.6 × 401 mm

Similar boards
- 2 layers108 × 66 mm

- 2 layers60 × 79 mm

LedBandRadio
Kreyl/LedBandRadio
MCU+Radio868 with F antenna + powerful BUCK (12 to 5) + 3x switch for RGB LED band + connector for WS2812 band
104 parts - 2 layers112.3 × 60 mm

- 4 layers168 × 90 mm

- 4 layers100 × 100 mm

Robot
UBC-Thunderbots/Electrical
All things electrical, from radio communication to BLDC motors. Zappity zap!
186 parts3 - 2 layers87 × 88 mm

- 2 layers

- 4 layers72 × 72 mm

Questions
How big is the Tx2 PCB?
It measures 66 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tx2 use?
55 parts, built around the CC1101RGP and LP2951D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tx2 KiCad files?
From the Kreyl/tirusse repository on GitHub, at the commit this page was made from: the board is Tx2_hw/Tx2.kicad_pcb and its schematic Tirusse_hw/Tirusse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tx2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.