4 layers72 × 72 mm
2 layers60 × 79 mm
LedBandRadio
Kreyl/LedBandRadioMCU+Radio868 with F antenna + powerful BUCK (12 to 5) + 3x switch for RGB LED band + connector for WS2812 band
- Size
- 60 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 104
- Nets
- 68
- Pads
- 385
- Tracks, vias
- 2,111, 202
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 9 May 2016
- Updated
- 16 Oct 2020
Overview
LedBandRadio is an open-source printed circuit board by Kreyl, from the Kreyl/LedBandRadio repository on GitHub. It is a 2-layer board of 60 × 79 mm with 104 parts on 68 nets, routed with 2,111 tracks and 202 vias.
It is built around the CC1101RGP, LM3150MH and USBLC6-4, with the BLM15AG102SN1, IRF8714 and SS14 among its other parts. Its parts include 47 capacitors, 15 resistors, 7 fuses, 4 inductors and 3 diodes. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
9
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
LM3150MH
HTSSOP-14-EP-40℃~+125℃@(TJ) 1 12A 1MHz 6V~42V Adjustable Buck Buck External Yes HTSSOP-14-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersUSBLC6-4
UncategorisedSTMicroelectronics
BLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
IRF8714
SO-8MOSFETsTECH PUBLIC
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesLP2951D
SOIC-8-40℃~+125℃@(Tj) 1 1.235V~30V、5V 100mA 30V 430uV 450mV@(100mA) 75uA Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MC74VHC14D
SOIC-14-55℃~+125℃ 1 10.6ns@5V,50pF 2.2V~3.85V 2V~5.5V 2uA 6 74VHC 8mA 8mA 900mV~1.65V Schmitt trigger 电源关断保护、噪声抑制功能 SOIC-14 Inverters ROHSonsemiInverters
NCP583SQ28
SC-82AB-40℃~+85℃@(Ta) 1 150mA 1uA 2.8V 250mV@(150mA) 6V Enable Fixed Positive SC-82AB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
104| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1u | Capacitors:CAP_0603 | C2, C18, C21, C22, C25, C27, C31, C32, C34, C38, C39, C40, C43, C44, C45, C46 +3 |
| 6 | 1000u | Capacitors:CAP_10xxR | C3, C5, C7, C13, C14, C16 |
| 6 | 10k | Resistors:RES_0603 | R4, R9, R11, R12, R13, R15 |
| 6 | Fuse0R | Resistors:RES_0603_FUSE | F1, F2, F3, F4, F5, F6 |
| 5 | 1u | Capacitors:CAP_0603 | C10, C12, C19, C28, C33 |
| 4 | 18pF | Capacitors:CAP_0603 | C15, C17, C24, C29 |
| 3 | 10n | Capacitors:CAP_0603 | C4, C26, C30 |
| 3 | 10u | Capacitors:CAP_0805 | C35, C36, C37 |
| 3 | 1k | Resistors:RES_0603 | R6, R7, R14 |
| 3 | IPS6041 | SO_DIL_TSSOP:SO8_150MIL | DA4, DA5, DA6 |
| 2 | * | Capacitors:CAP_0402 | C41, C42 |
| 2 | 10u 16V | Capacitors:CAP_0805 | C1, C6 |
| 2 | BLM15AG102SN1 | Inductors:IND_0402 | L2, L3 |
| 2 | HOLE_METALLED | PCB:Hole3_5_out6mm | HOLE1, HOLE2 |
| 2 | IRF8714 | SO_DIL_TSSOP:SO8_150MIL | Q1, Q2 |
| 2 | SS14 | Diodes:SMA_DO214AC | D3, D4 |
| 2 | TESTPOINT | PCB:TESTPOINT_1MM | TP1, TP2 |
| 1 | * | Inductors:IND_0402 | L4 |
| 1 | 0.47u | Capacitors:CAP_0603 | C11 |
| 1 | 100k | Resistors:RES_0603 | R1 |
| 1 | 10u | Capacitors:CAP_0603 | C20 |
| 1 | 12MHz | Quartz:0503x4-4 | XTAL1 |
| 1 | 12k | Resistors:RES_0603 | R5 |
| 1 | 20k | Resistors:RES_0603 | R8 |
| 1 | 27MHz | Quartz:03225C4 | XTAL2 |
| 1 | 2k | Resistors:RES_0603 | R2 |
| 1 | 4.7uH | Inductors:13x13 | L1 |
| 1 | 470pF | Capacitors:CAP_0603 | C23 |
| 1 | 56k | Resistors:RES_0603 | R10 |
| 1 | 75k | Resistors:RES_0603 | R3 |
| 1 | ANT_GENERAL | Radio:ANT_INVF_LEDBANDRXTX | ANT1 |
| 1 | BALUN868JOHANSON | Radio:BALUN_JOHANSON868 | BLN1 |
| 1 | CC1101 | QFN_DFN:QFN20 | DD2 |
| 1 | CONN_2 | Connectors:TermiBlockHeader_508_x2_R | XL2 |
| 1 | CONN_3 | Connectors:TermiBlockHeader_508_x3_R | XL5 |
| 1 | CONN_4 | Connectors:TermiBlockHeader_508_x4_R | XL6 |
| 1 | CONN_5 | Connectors:PLS-5 | XL4 |
| 1 | CONN_6 | Connectors:PLS-6 | XL1 |
| 1 | DIPx6 | BtnsSwitches:DIP_SMD_1D27X6 | SW1 |
| 1 | Fuse0R | PCB:FuseShorted | F7 |
| 1 | LED | LEDs:LED_0603 | D5 |
| 1 | LM3150 | SO_DIL_TSSOP:HTSSOP14 | DA1 |
| 1 | LP2951 | SO_DIL_TSSOP:SO8_150MIL | DA7 |
| 1 | Logo | Pictures:Ostranna_12d7_10d1 | Logo1 |
| 1 | MC74VHC1 | SOT:SOT23-5 | DA3 |
| 1 | NCP583SQ | SOT:SC82AB | DA2 |
| 1 | STM32L151CxTx | LQFP_TQFP:LQFP48 | DD1 |
| 1 | USBLC6 | SOT:SOT23-6 | U1 |
| 1 | USB_Micro_B | Connectors:USBmicro_MOLEX_WM17142 | XL3 |
Similar boards
- 2 layers108 × 66 mm
- 4 layers168 × 90 mm
- 4 layers108 × 63 mm
- 2 layers48 × 85 mm
- 4 layers88.2 × 61.4 mm
- 4 layers18 × 96 mm
- 4 layers21.6 × 401 mm
Questions
How big is the LedBandRadio PCB?
It measures 60 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LedBandRadio use?
104 parts, built around the CC1101RGP, LM3150MH, USBLC6-4 and BLM15AG102SN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LedBandRadio KiCad files?
From the Kreyl/LedBandRadio repository on GitHub, at the commit this page was made from: the board is LedBandRadio_hw/LedBandRadio.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LedBandRadio design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.