2 layers66 × 39 mm
4 layers21.6 × 401 mm
Tirusse
Kreyl/tirusseSword which lights up when orcs are near
- Size
- 21.6 × 401 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 237
- Nets
- 165
- Pads
- 747
- Tracks, vias
- 4,833, 599
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220609)
- Created
- 30 May 2022
- Updated
- 29 Oct 2024
Overview
Tirusse is an open-source printed circuit board by Kreyl, from the Kreyl/tirusse repository on GitHub. It is a 4-layer board of 21.6 × 401 mm with 237 parts on 165 nets, routed with 4,833 tracks and 599 vias.
It is built around the CC1101RGP, BLM15AG102SN1 and IRLML6401, with the PMEG2020EH, BC848 and DMG2302U among its other parts. Its parts include 107 capacitors, 74 transistors, 21 resistors, 3 diodes and 3 inductors. It belongs with the STM32 boards of this library.
Main components
10
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
BLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
IRLML6401
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 830pF 85mΩ@1.8V 950mV P-Channel SOT-23 MOSFETs ROHSKEXINMOSFETs
PMEG2020EH
SOD-123F1 Independent 200uA@20V 20V 2A 525mV@2A 9A SOD-123F Schottky Diodes ROHSNexperiaSchottky DiodesBC848
SOT-23SOT-23 Bipolar (BJT) ROHSTDDBipolar (BJT)DMG2302U
SOT-23-55℃~+150℃ 1 N-channel 120mΩ@4.5V 1V 20V 4.2A 57.7pF 594.3pF 64.5pF 7nC@4.5V 800mW SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsIRLML9303
SOT-23MOSFETsLeiditech
LSM6DS3
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 8KB Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
MC74VHC14D
SOIC-14-55℃~+125℃ 1 10.6ns@5V,50pF 2.2V~3.85V 2V~5.5V 2uA 6 74VHC 8mA 8mA 900mV~1.65V Schmitt trigger 电源关断保护、噪声抑制功能 SOIC-14 Inverters ROHSonsemiInverters
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
Parts
237| Qty | Value | Footprint | References |
|---|---|---|---|
| 89 | 0.1u | Capacitors:CAP_0603_Silks | C12, C13, C14, C15, C16, C17, C21, C22, C23, C24, C27, C28, C29, C100, C101, C107 +73 |
| 74 | LED_RGB_WS2812B_2020 | LEDs:LED_2020_WS2812 | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +58 |
| 7 | 100k | Resistors:RES_0603 | R8, R9, R11, R17, R18, R19, R21 |
| 4 | 10u | Capacitors:CAP_0603_Silks | C20, C104, C105, C106 |
| 4 | 18pF | Capacitors:CAP_0603_Silks | C7, C8, C10, C18 |
| 4 | 1u | Capacitors:CAP_0603_Silks | C11, C25, C102, C103 |
| 3 | 10k | Resistors:RES_0603 | R12, R15, R16 |
| 2 | * | Capacitors:CAP_0402 | C2, C3 |
| 2 | 1k | Resistors:RES_0603 | R3, R7 |
| 2 | 2N7002 | SOT:SOT23-3 | VT5, VT6 |
| 2 | 56k | Resistors:RES_0603 | R2, R6 |
| 2 | 5k1 | Resistors:RES_0603 | R4, R5 |
| 2 | BLM15AG102SN1 | Inductors:IND_0402 | L2, L3 |
| 2 | CONN_1 | Connectors:PLS-1Square | XL5, XL7 |
| 2 | CONN_1 | PCB:Oval3x1.5 | XL3, XL4 |
| 2 | IRLML6401 | SOT:SOT23-3 | VT2, VT4 |
| 2 | PMEG2020 | Diodes:SOD323 | D2, D3 |
| 2 | TESTPOINT | PCB:TESTPOINT_1MM | TP1, TP2 |
| 1 | * | Inductors:IND_0402 | L1 |
| 1 | 0R2 | Resistors:RES_1206 | R10 |
| 1 | 1.2k | Resistors:RES_0603 | R14 |
| 1 | 100pF | Capacitors:CAP_0402 | C1 |
| 1 | 10n | Capacitors:CAP_0603_Silks | C26 |
| 1 | 10u | Capacitors:CAP_0603 | C19 |
| 1 | 12MHz | Quartz:03225C4 | XTAL2 |
| 1 | 1M | Resistors:RES_0603 | R13 |
| 1 | 20k | Resistors:RES_0603 | R20 |
| 1 | 27MHz | Quartz:03225C4 | XTAL1 |
| 1 | 2R0 | Resistors:RES_0603 | R1 |
| 1 | 2u2 | Capacitors:CAP_0603_Silks | C4 |
| 1 | ANT_PCB_MONO_2PIN | Antennas:Tirusse868_inverted | ANT1 |
| 1 | BALUN868JOHANSON | Radio:BALUN_JOHANSON868 | BLN1 |
| 1 | BC848 | SOT:SOT23-3 | VT7 |
| 1 | BUTTON_H | BtnsSwitches:BTN_IT1198 | SW1 |
| 1 | CC1101 | QFN_DFN:QFN20 | DD2 |
| 1 | CONN_1 | Connectors:PLS-1Oval | XL6 |
| 1 | CONN_6 | Connectors:PLS-6_LOCK | XL1 |
| 1 | DMG2302 | SOT:SOT23-3 | VT1 |
| 1 | IRLML9303 | SOT:SOT23-3 | VT3 |
| 1 | LED | LEDs:LED_0603_ch | D1 |
| 1 | LSM6DS3 | LGA:14_3x2d5_p0d5 | DD1 |
| 1 | Logo | Pictures:Ostranna_12d7_10d1 | Logo1 |
| 1 | MC74VHC1 | SOT:SOT23-5 | DA1 |
| 1 | MCP1700 | SOT:SOT23-3A | DA2 |
| 1 | MOTOR_NO_CONTACTS | Installation:Motor_no_Contacts | M1 |
| 1 | STM32L433Cx | LQFP_TQFP:LQFP48 | DD3 |
| 1 | TP4056 | SO_DIL_TSSOP:SO8_150MIL | DA3 |
| 1 | USB_C | Connectors:USB_C_MOLEX_1054500101 | XL2 |
More from Kreyl/tirusse
1Similar boards
- 4 layers118 × 21.4 mm
- 4 layers88.2 × 61.4 mm
- 2 layers39 × 19.2 mm
- 4 layers18 × 96 mm
- 4 layers310.5 × 21.4 mm
- 4 layers60.8 × 64.8 mm
- 2 layers46 × 103 mm
- 2 layers30 × 103 mm
Questions
How big is the Tirusse PCB?
It measures 21.6 × 401 mm and has 4 copper layers, 1 mm thick.
What parts does the Tirusse use?
237 parts, built around the CC1101RGP, BLM15AG102SN1, IRLML6401 and PMEG2020EH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tirusse KiCad files?
From the Kreyl/tirusse repository on GitHub, at the commit this page was made from: the board is Tirusse_hw/Tirusse.kicad_pcb and its schematic Tirusse_hw/Tirusse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tirusse design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.